Yeah mine is from Michigan. I have it on the underside too but i wanna start by fixing this first. Im afraid the underside is going to be the really costly part. But basically fix the rust on the towers and spray the shit out of the underside of the tower and call it good?

Damn... and i thought mine was bad. I thought i was looking at like $500+ to fix all this

and it didnt rust again??

i can get someSee if this works

How much does it normally cost to get the strut tower rust fixed? Just trying to get a general idea on how much others paid

How the hell did you get that for $30??

The body on my FWD 96' talon is rusted pretty bad and the strut towers are starting to show that. There is a guy selling a perfectly good AWD shell. This is exactly what is says too "Body has no rust is a rolling chassis comes with konig racing rims and brand new falkin tires front end is the...

Looking for;Bushing set Spring/Strut setup (Lowered around 1.2in) Sway bar? Motor mounts?What would be good to get for a DD. NO DRAG. Just curious.Links would be great :thumb:Thanks in advance Mike

By capping them off would you throw a 'check engine light/code'??

If you guys know of other intercoolers that are decently priced please put a link up. This one is pretty cheap but i dont know if i like how much piping there is.What mods would you say to have done before getting a FMIC too??

Im sure this is a stupid question but "heat soak it"?? What is that?And if you guys have a link to what ebay intercooler your using that would be much appreicated

Sorry the link is up now

Has anyone tried this? or something like this? A friend came across this and pointed me towards it. What do you guys think of it or something similar...

I dont see the big deal in capping them off or blocking the EGR off

That's the winner right there ^^^^CF hood w/the mustache looks real sick

What is the proper length it should be adjusted to?Just curious

send me a link so i can check it out then

Ok so final help on pickingthis...: Clutch / Transmission : Himni Racing, Turbocharger, Turbo, Garrett, Turbo Kit, GReddy, Mazda RX-7, HKS, Apexi, TiAL, TurboXS, TurboSmart, Flange, Turbonetics, Exhaust, Intercooler, ACT, Intakeor this...EXTREME PSI : Your #1 Source for In Stock...

^ correctNow would that hurt anything not being plugged in?

So i took the intake off today just to clean it and the MAF and found a vacuum tube that wasnt plugged into anything. It was on the bottom side of the intake. Looks like it goes to the turbo and is connected to a 'T'. The other end of the T goes to the wastegate maybe.What is it? and would...

Ok. Um update..I have been driving the car the past few days but REALLY REALLY taking it easy. Today (four days later) about 200 miles of taking it easy i decided to punch it. Clutch grabbed real hard and FULL BOOST. Did it again and no problems what so ever. I plan on taking it easy for a...

Well text me within the next week or so and maybe we can work something out. I would love to have someone teach me. i'll talk to my buddy about maybe using his garage.

Thats not bad. The only problem i have is i have little to no tools in south bend. In fort wayne i usually go over to a buddys house who has everything i need. thats one reason i have been trying to find someone i can take my car to

I live in South Bend, IN but go to school in Fort Wayne, IN for another month or so. From South Bend its about 2 hours easy. Farther into chicago though it would be hard ### once the clutch gets hot then my car doesnt want to move anywhere.

this?STAGE 4 RACE CLUTCH & FLYWHEEL 93-99 ECLIPSE TALON FWD - eBay (item 200595254691 end time May-06-11 18:05:34 PDT)

You sure that would be ok on a stock car? Or even barely modded car?

How long would it take to do and how much you thinking?Would that clutch/flywheel setup be good for my stock/mods to come car? Or should i just get my flywheel resurfaced?

Oh. Whats wrong with it? OR i should say makes it a pos?

Why do you say that?

So i had my buddy replace my slave and master cylinders. After a few more maintance replacements and some odd problems it looks like my buddy messed up with the slave and master. And sadly it ate up my clutch. After the clutch gets hot it will start to slip and smells like it burns up a little...

I think im going to get an ACT 2100 clutch kit but like i said i would like some help so i can buy a new flywheel too instead of using all that money for laborHow would a ACT Heavy Duty 2100 Clutch Kit DSM as a Solid Hub Disc (6 puck) w/ACT Street-lite flywheel treat me with a stock TSI right...

Even for something like this?http://vr-speed.com/store/heavy-duty-2100-clutch-p-990.html

Well shit. Ok. I'm not as worried for the clutch as i am for finding help putting one in.Do i know how to? -NoCan i help as much as i can? -YesCan i get you a beer when you want one? -Yes lol :thumb:Like i said in my other post i just got this car a few weeks ago and my buddy...

^exactlySo who has the best deals for agood clutch?Anyone around Fort Wayne, IN or South Bend, IN who would be willing to help? :pray:

I would feel worried about an ebay one. But thats just me

I put my planned mods in the first post

So who sells those cheap?I was looking at these earlier;Fidanza 2.1 Performance Clutch Kit : Eclipse/Talon 90-99ACT Heavy Duty 2100 Clutch Kit DSM

Looks like a need a new clutch. I wanna get something other than OEM. No mods as of right now but i will get some.Mod list to come; 2.5-3 in exhuast Intake Boost gauge/controller 1G BOV FMICWhat would be a good clutch to put in? Links would be greatThanks in advance Mike

If i had help and the tools i would do it but knowing nothing about these cars so i dont want to tryFidanza 2.1 Performance Clutch Kit : Eclipse/Talon 90-99Would this be something i should consider?

Well thats the thing. The kid i bought it off of SAID it had a Stage II clutch. Which the trans does look like it was taking apart recently BUT as of right now im paying for housing and cant work for another month WHICH is why my parents want me to tell me friend who messed up the install to at...

They did this already. Clutch pedal feels good. Comes right up after a shift. Car runs good till hot again and starts to slip. Feels REAL good at first when cool. After that slips and have to pull over and let it cool till i can try to drive again. When it slips the smell is horrible.

Ok so a little update.It does seem to be a slipping clutch. I had it towed to a tranny shop and they said the bracket on the clutch pedal was bent. The master cylinder line was kinked ( if thats how you spell it lol ). And the slave cylinder rod wasnt installed correctly. The fixed all that...

Ok i got it. Can be done but not worth it

Guess i should of said its a 96' talon

I know this is beyond a stupid question BUT will a AWD exhaust fit on a FWD? If not what is the difference?

got it. I will start tomorrow morning. Can anyone answer my question above?? Or if someone is close to me and would like to teach me that would be even better :D

Can you explain the master cylinder rod adjustment so i can explain it to my friend who did it. Same with the height of the pedal? Not familiar with those two but i will do the fluid right away.

Ok so i will answer everything that was just asked by XiKeiyaZI. My friend who works at a Nissian dealership put in my master and slave. And what you said is exactly right. When i rev it at any gear the RPMs climb up but the car barely goes. And when i do rev it smells like something is burning...

I DO NOT have a boost gauge. Sometimes it seems like i am boosting and other times it seems like i am boosting more that stock. As for plugs and wires i just did all that last week. NGK wires and plugs combo from punishment racing.As for the thermostat i just got a brand new one. Why would...

Anyone around South Bend, IN who can help me with this?Why would my car act like that when i get into the higher temps?