The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Rix Racing
Please Support STM Tuned

Search results for query: *

  1. noV8undrDIShood

    what electric water pumps you guys using??

    Hey guys, I am in the process of plumbing my liquid-air intercooler and I need to pickup an electric water pump. I was wondering what brand/gpm you guys (that have liquid-air) are usingThanks guys
  2. noV8undrDIShood

    Low 10's... Yes please!

    Hey guys, im a little late on starting this and I should have been taking alot more pictures that i did, but better late than never right.I have a 93 laser and have completly tore it down and started from the ground up. I am looking for low 10's.Project setup: 6 bolt 2.3L with eagle...
  3. noV8undrDIShood

    1G staging brake plumbing

    Hey guys, I have a staging break that I used on another car that I am going to use on my 1g, but I am not sure how to plumb the staging break for an awd setup. I have looked around and found paul's thread about them but never really stated which way he went with it. Talk also has a thread...
  4. noV8undrDIShood

    quick question about the Q45 TB

    Hey guys, about to get a Q45 TB and had one question about the wiring. For the tps, am I supposed to splice into the pigtail on top of the tps, or do i need to get plug from a Q45 and use the plug on the end of the tps.. thanks guys (read the 7 page merged thread and there was kinda oposing...
  5. noV8undrDIShood

    check this out for me please

    Hey guys, long story short i have been unpatiently dealing with a certain vendor(i don't want to give names) about a Magnus fuel rail i had ordered 3 months ago. Well pm after pm and email after email i have finally gotten it.. BUT i am 95% sure that they did not send me a magnus rail and i had...
  6. noV8undrDIShood

    side exit exhaust in PA

    hey guys, i am trying ot finish up my build this winter.. I am looking to go side exit exhaust, although it is not going to be my dd.. it will still be drivin on the street..I am looking for guys who are running a side exit exhaust (out the front bumper) in Pa and how much cops are...
  7. noV8undrDIShood

    what year cummins came stock with hx40

    hey guys.. i am looking at buying a Holset off of my budy.. he has a 99 cummins (M/T) that he took off the truck. He bought an hx35, now the one he took off is physically larger than the 35 that he just got.. My question is what years of cummins came with the hx40, if they even did. there really...
  8. noV8undrDIShood

    kelford 280 cams+2.3 stroker

    Hey guys, im down to the only a handful of parts left to get to complete my build.. profile is not updated but i will fill you in2.3L all forged internals BW S259 t3 .70 housing----> about 35psi 3 angle port and polished head ss supertech valves (stock size) kiggly beehives/titanium...
  9. noV8undrDIShood

    where to buy hubcentric rings

    Hey guys.. last thing to do on my brake upgrade,, i need hubcentric rings for the front of my 1G.. no i know what size i need but it seems like every place i call doesn't stock the size. and i would have to have them custom made which is like 70 bucks for a pair.. just need to know where the...
  10. noV8undrDIShood

    simple question really quick (Brakes)

    hey guys, i am pretty much all but done with the vr4 4 piston caliper swap onto my 1g.. now i need to order my ss lines.. i know the stockers aare way too short.. so im not sure if i will need to get the vr4 lines or the lines off of a galant vr4 which are like the non turbo 3000 gt...any...
  11. noV8undrDIShood

    1G 1g rear brake upgrade

    hey guys... got a quick question.. i know there are already threads about this but they are not answering what i want to know. i just got done with the 4pot caliper swap from the 3kgt vr4 on the front and now the rar calipers are going out.. i have looked all over the internet and cannot find a...
  12. noV8undrDIShood

    vr4 brake upgrade

    hey guys, im in the middle of a vr4 4 pot brake upgrade on my 1G.. I am trying to find a 12.6 inch rotor.. i know alot of guys go with the 13 inch cobra rotors, which that will be my second option. Any input from people who have done it would be awsome..thanks in advanced
  13. noV8undrDIShood

    oil squirters

    Hey guys quick question..What is the difference, if there is any, between the oil squirters in the 6 bolt and 7 bolt..Thanks guys
  14. noV8undrDIShood

    in search of pictures of 1G's with 25mm wheel spacers

    hey guys.. im getting ready to do a vr4 brake swap onto my 1g and wanted to get a look at what the cars look like with the 25 mm wheel spacers on.. i don;t think it is legal to have the tires hang out past the fenders in pa, so im trying to see how much it pushes them out..thanx in advanced guys
  15. noV8undrDIShood

    Please don't shun me - honda tech question

    Hey guys, my girlfriends little brother just bought an 88 crx.. I know i know, i told him to go dsm but he didnt want to have the same car as me. Anyways, we are having troubnle starting it (getting no power to the fuel pump) I put direct power to the pump and it runs but wire to it is dead. Not...
  16. noV8undrDIShood

    will this rod/piston setup hold up

    hey guys, need to get some information.. I bought A set of wiseco forged stroker pistons along with a set of manley I-beam turbo tuff rods. I wanted to know if there is any guys out there running this combo and what are the certain power levels these will hold up to.. I am building a 2.3L 6-bolt...
  17. noV8undrDIShood

    Blouch turbo shootout

    The turbo shootout is back and coming up quickly!! The Blouch Turbo Shootout is on May 22nd this year and should be one He## of a show. Need to get some DSM's out there to represent!!!!http://www.beaversprings.com/
  18. noV8undrDIShood

    D2 coilovers for 1G

    Hey guys.. i have a simple question really quick.. I bought a set of Kosie K1's a couple weeks ago and i am having some fitment issues. They are slightly rubbing on the spring base on the strust towers. I was looking to get the D2 series coilovers and was wondering if i would still have those...
  19. noV8undrDIShood

    Flywheel or no flywheel.. mixed decisions

    Hey guys.. I am in the process of a build and I wanted to get my flywheel soon because the engine is almost done at the machine shop and wanted to get it all balanced.. Now this is a 2.3 6bolt and should be up around the 550 awhp range.. I am going with the Shep stage three once I am ready for...
  20. noV8undrDIShood

    Will Walbro 255HP be sufficient while running E85

    Hey guys, well I have been collecting parts over the past 4 or 5 months so far. I already have my Walbro 255hp in my parts pile, I was planning on running E85 in the car. My current parts/mods are 255hp pump, Fuel lab FPR, Magnus 10an fuel rail, Full 6an tank-rail SS fuel line, FIC 1200cc...
  21. noV8undrDIShood

    1g talon front bumber

    Hey guys, need to know if anyone in the area has a 1g talon front bumber for sale.. I really want one so i can put my FMIC in with out completly butchering up my laser front bumper.. which they look like crap anyways..Thanks guys let me knowZac
  22. noV8undrDIShood

    Have a question for the guys with a 2.3 stroker

    Okay, I am getting ready to order a 2.3 stoker setup from SLOBO and was wondering how much you guys paid in machine work. The block is already at the machine shop, just got all cleaned up and magnafluxed :).. But before I ordered the setup i wanted to ake sure i had enough money inorder to get...
  23. noV8undrDIShood

    need some answers on 2.3 stroker

    Ok guys.. I just bought a 6 bolt that i am going to buid from top to bottom. I want to get in the 350-400 range or maybe a little more. I was looking at putting a 2.3 stroker kit in this engine but am not completly sure. I wasn't sure performance wise what the stroker kit did to the engine...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top