1992_Talon_tsi submitted a new DSM Profile :2G ECLIPSE GS-TRead more about this vehicle here...

I need help figuring out why oil and coolant are mixing in my motor. Before i start its a 7bolt block bottom build stock head with (MLS HG & ARP head studs). Today i pulled the valve cover to see what was going ON because days earlier i found some oil and coolant mixture in my dipstick and...

I have a problem on my 1g, for some reason injector 2&3 are not working i switch them around and even test them and theyr good. Now i checked to see if there was any short between resistor and injector but signal appears constant. The other thing i could think off its either a short between the...

Need help wiring a switch to my starter, anybody have any pictures or directions that could help me thanks.

I need help getting my starter to crank the car its a 1995 2g GST, every time i turn on the key i just hear a click coming from starter relay but nothing else, starter relay its brand new.. I tried jumping starter directly from battery and it cranks perfectly but from inside the car it wont. Any...

Im having a problem with the wastegate fitment, my manifold wastegate flange its pointing to the left so its right in front of the oil dipstick.. What should i do to fit correctly should i bend the oil dip stick?

Ok post its for a (95 GST 7bolt) for some reason the black slim positive wire of my starter its not getting positive signal, i tried using a positive wire from the battery and it crank and started. Im not up to go through the whole harness just to see whats causing that im sure most likely its...

Guys i need help, whats a trusted site to buy new flywheel bolts, pressure plate bolts and pivot ball. This its all for a 2g 7bolt..

I need Flywheel, pressure plate, transmission bolts torque spec for a 2g 7bolt. I tried downloading the manual but it freezes my computer.

Need help installing the afr gauge purple wire into the 02 sensor. Into witch of the 4 wires on the 02 should i tap the purple wire?

Alright guys i just did a quick pull to log my 1g to see how it was doing and need some from you guys. I would like to know how this log looks from your point of view. Done with MMCD for palm. Setup: 560cc injectors, Fpr 41psi, Walbro 255, b16g at 8psi, Maf-t, Gm maf3"Log: Rpm: 6468 INJP...

Hello im heaving some thoughts on the car i bought and i would like if you guys could describe more or less of whats going on. Its a 1995 GST freshly built 7BOLT BLOCK with eagle crank, eagle rods & bearings, je pistons, arp hg & head studs. Currently the car its not running have some issue with...

Ok just bought a turbo block, taking it appart to take it to my local machine shop. Im trying to push well over low 500s maybe to mids, ill be using a set off ross pistons 8.3comp maybe bore 85.75mm or 85.5 with oem 1g rods and crank would this be able to hold the power im looking for. Now for...

Guys my check engine light is on i just log to see what it was and it gives me code #11 wich is 02 sensor but what could it possibly be because that 02 sensor its like 2 month old only...

Guys is there an app for palm that i could use to check my check engine codes?

Ok guys today when i logged my car and the knock rate its at 15 at WOT i know this is not normal, the sensor its new was replaced a couple of weeks ago altho i adjusted with my hands cause theres no way i could get a wrench in there this could possibly be? or also im my fpr its at 40psi maybe...

Ok guys today i was logging my palm m130 data logger and everything logs ok until i go WOT it pops a screens saying Fatal alert- Fatal exception(inside) and it makes me reset it what could it possibly be?

Guys just wanted to know if ia n/t engine would take 16psi with supporting mods? right now im running on 10psi but im trykng yo see how dar i could get with this engine?

Whats up guys i wanted to know if i put turbo cams they came out of a gst, would it make a difference i know or would i lose some torque and top end power?

Guys i have a fidanza lightweight flywheel 6bolt but my talon its a n/t so n/t transmission and the flywheel was on a turbo tsi what do i need to install it i have in mind new clutch...

Ok guys right now i have a flowmaster cat and i was thinking of cutting it and running straight pipe because i like the noise it makes without it. What would be better for me? Leave it on or cut it, performance first then everything else..

Guys i need help cant thigh in all the way the screw that goes to the brake. I thigh it up a little bit but couldnt go completely in because the bolt start spinning what type of tool could i use to hold the bolt and get it thigh. What im talking about its what you see hanging in the pic the part...

Ok guys yesturday i installed DropZone front lowering springs in my car, it dint lower it at all so today i was waiting for today to see if anything happens and nothing. Its supposed to lower the car by 2inch and it havent even lower 1 inch do i need anything to make it happen? camber kits, new...

Guys any idea of where i could buy a 1g male Maf pigtale, i already check on local yards around here and nothing and also checked a few sites and couldnt find anything. I really need this trying to do a clean job...

Ok guys first of all im sure its the clutch but i just want to make sure. My dsm its grinding 3rd gear when shifting quick when daily driving or racing of course. Now if i hold the clutch like 3 to 4 seconds and i shift it wont grind and its kind of soft. For this reason im guessing its my...

Ok guys i found a few threads about it but none of my interest if anyone could explain with pics how the knock sensor wiring goes i know that the with cable gets the solid 12v signal from the ECU but i know its not it. If anyone could fine explain this to me i will appreciate it. O and btw this...

Guys i need help on short routing my intercooler piping on my 92 talon, and also my gauge its reading vacum on 20 how can i fix this?

Guys i need help, this morning i install a new eprom turbo ECU, and also rewire in the injectors resistor pack and installed a new manual FPR. For some reason when i was done i turn on the key and the cars cranks does like if it got spark on the cylinder and is going to start, but it wont start...

Ok guys i wanted to know what would be a good place too keep my boost between driving and open WOT time? I have a 92 talon n/t converted to turbo so it has a N/A engine and i know my high compression pistons hate boost but what would the limit be? Basic fuel mods: 625cc injectors and a MFPR at...

Guys i just wanted to know what its the part number for the Turbo ECU for 1G? Or how can i tell if its really a Turbo ECU?

Ok guys so im heaving problems lately with upgrading the fuel, the dsm its a n/a converted to turbo, it still has the n/a ECU, WIRING HARNESS, and fuel setup. In other words its running on 240cc injectors with the stock pump on a B16g at 12psi thats extremely lean in fuel and its dangerous...

Alright guys this thread is about need fro speed pro street. This game is bang for a buck pretty worth to buy i havent since it came out but been playing lately and i got to say its great how EA added a completely tune ability feature. Well what unite this game to dsm is that there is a 1999...

Alright guys so here i have a little project on a 1g for my next paycheck:D, ok so im planing to drop a 1g gsx head into a n/a block obviously (fwd) converted to turbo. Alright so my question is the fallowing i know that some components from the n/a head wont fit into the gsx head so i would...

Whats up guys here im having a little apparently (problem). Ok so what is happening is: when i start the car everything is normal but as soon as a accelerate at about 3000-3500 rpm the turbo spools normally, when i check my exhaust it was blowing a little bit of white smoke, Now could this be...

Ok so this thread its about something a little different that i search on the forum but dint find an answer. My question is on the side of a turbo block is it supposed to read a big (T) and also (2.0L) ? or does the N/T and Turbo engines read the same?

Sup guys just had a few question as for a 1g eclipse n/a turbo converted. Ok so the car is still running on stock 240cc injectors, stock fuel pressure, stock fuel pump and the block is a stock n/a. Turbo running currently is and evo 3 big 16g along with a fmic and ssq bov. Ok so my question is...

ok so my situation is that im trying to set up maf translator on a 1g talon n/a turbo converted, problem is that the stock maf connector is smaller than the maf-t connector and im kind of lost on what to do in this situation, also the stock maf connector has 6 pin and the maf-t has 5 .....if...

Ok so the other day my car stayed out of battery and i tried to jump start it and i notice one of the battery fuse was gone, but i thought it wasnt going to do anything to take it out so i took it off and tried to jump start and when i turned the key the alternator started smoking and smell like...

Can 16g be set up with t-25 Water/Coolant and oil Feed and Return Lines on a 1g? Does it needs any adaptations?neeed help asap

Ok guys this is the question i just bought a maf and im about to install it , now do i need the maf translator to run the maf ? because its a little expensive and i just order alot of parts for my dsm and im running out of money:cry:...

Sup guys just passing by to drop some pictures of me know on ps3 as killer-_-1777 and MAINERDSM know on ps3 as sharpshot411 cruising around hope you guys enjoy it and of course comments and thoughts welcome ;) btw the white dsm its mine the other dsm its sharpshot411 dsm, and the other evo and...

Ok guys i need help with installing an FMIC on my 1g talon if i could have any pics,videos,or instructions anything helpful ?

Sup guys just wondering if any of you have done an spoiler swap on a 1g tsi ,putting a 2g'T spoiler i know it sound a little bit ricey but idk i just cant stop thinking about how it would look good or bad ? any pictures would help !!

Guys i was just wondering if any of you have use a Turbo Nitrous System. Acording to what i read what it does is help spool-up engines equipped with turbos and as soon as a certain level of turbo boost is reached, the nitrous automatically shuts off. Is anyone runing this type of setup?, is it...