So i recently got a m&w pro 12 ignition box and I'm trying to wire it up. I think I figured out where all the connections go according to the instructions they give. Where I've stumbled upon is there is a twin spark option and a power level option to hook up. Does anyone with experience with...
I’ve got a full set of ground control coil over kit setup for 95-99 eclipse or talon . The ground control kits all use Eibach springs . The front springs are 430 lb 7” 2.5 iD and the rear are 250 lb 7” 2.5ID.. Only selling the coil over kit. The koni shocks are old but still work fine. One is...
Got a recently rebuild t28 turbo for sale. Went a different route turbo spooled great. Only thing is when I took off the turbo one of the manifold studs broke but it has three good threads for the manifold . The exhaust housing has hairline cracks where it was ported by fp..$325 or best offer...
i know that 2 step tru dsmlink cuts the fuel but if you have like a msd or a dynatek system you can cut the ignition for launch control. i know is not ideal to wash the cylinders with fuel with a ignition cut and fuel cut is not as harsh and violent as ignition cut. What do u guys prefer for a...
have a holset hx40 with a restrictor and idle set at 900rpm. measuring the oil pressure i read 5-8 psi at idle when fully warmed. about 70-75 psi by 7500 rpm. what are people doing to increase the oil pressure at idle for the turbo. just run a heavier oil? running 10w40. or just remove the...
I got a tial mvs wastegate for sale 17 psi spring rate . Functions Perfect . About 4 months old. I Might have to go to a mvr wastegate . Includes both clamps n the seal ring . U will have to get separate flanges for it unless u wanna buy my 02 housing on the picture as a package-Tial mvs...
- v band 02 housing flanged for mvs wastegate with dump tube n arp 02 housing bolts $275 shipped(sold)-fp manifold heatshield $120 shipped (sold)Message me or text me at 6825002586PayPal only
ive been doing some research and it seem thats the people say the new ticket for the 20g for fast spool and top end is to do a 20g with downfiring compressor cover with tdo6h on a 6cm turbine housing but the thing that is confusing me is that they are putting a tdo6h turbine wheel on a heavily...
so all of a sudden ive been having this issue where my AFR's will show 10.0 on my aem wideband at wot and then sometimes it will show 11.5. My AFR's are set at 11.0 what would cause such a random change in the AFR's like that.any ideas? :confused:
is the Cx Racing adjustable fuel pressure regulator the same as aeromotive with just a lower quality diaphram??
I need any input on this product. if so can i just replace the diaphram with an aeromotive one and be as reliable as aeromotive?
got the idle and cruise tune set and i think i got a pretty even afr matched up to to what i set on my direct access table. the problem im having is that its breaking out in the beginning of 3rd gear if i do a pull from a dead stop:confused:. i posted a logs. any help i would appreciate it. dont...
having trouble dialing in my injectors. i got them to idle at combineft close to zero as possible. poblem im having is that car feels like it wants to cut out between 2k-3k on part trouble with the more load it has but if i give more than 50%gas or full throttle it goes away and also at WOT it...
Well the new injectors are installed. and im just having trouble dialing them in at part throttle. at full throttle they work flawlessly but at part throttle anything under 3k it kinda getting a lean hickup /runs rough n kinda lean like up to 15.7 afr on close loop but when i give it more gas it...
The compressor is is fairly good condition. just a couple knicks on the fins as u can see on the fins but other than that its good. the turbine wheel ofcourse ima replace with a good one ### the bearings seem to have eaten onto the shaft. and the other concern is the chra housing journals. i can...
whats the lowest u can lower a 2g awd without affecting the handling capabilities.
looking for a height that will handle the best and have a good stance.
anybody had done their own water methanol injection out of the windshild wiper reservoir. and if so what did ya useany has any experience with this? is it easy to install and setup. im looking at the stage one setup. if i dont find a good DIY i might order this one but want input on this if...
i wanna go ahead and get rid of my stock shocks and 2"drop megan racing springs and get a good street suspension. im talking about springs and shocks. maybe coilvers that arent that expensive. ive seen the Yonaka Motorsports Spec 1 Coilover. anyone have any experience with this?
whats a some good camber kit for the front. i already did the longer bolt and spacers for the rear. my car is dropped 2inches with megan racing springs.
okay so my low gas light indicator is not lighting up at all. so i grounded the Yellow/w blue stripe wire to check the wiring and light and it lights up whenever i ground it. so what does that leave me to do to fix the gas light so it will light up. is it on the fuel sending unit now that i i...
how to u adjust the 2gb headlights so they shine straight.i see the most on the road. i think my right light shines a little more down then my right light
http://www.dsmtuners.com/forums/custom-fabrication/344794-important-improvements-saturn-alternator-swap.htmlanyone have a picture diagram or can draw one to how this improved alternator setup is wired?im read the whole post but its a little confusing.im more of a visual learner lolthe...
My car gas light does not work for some reason. even when the gas gers really low the light doe not light up. already check the cluster light bulb and its good. does anyone know what wire and where exactly it is that goes to the gas light on a 95 talon awd? just to make sure is not cut off or...
i have some rx7 rims installed on my car with the 225/45/16 tires. i had to grind just a bit on the control arms to prevent them from rubbing. i would like to get some 245's on them but i know for sure that it will rub and i dont wanna grind anymore on the control arms. was wondering how big of...
was wanting to do a evo3 16g swap from my 14b and was wondering if the rc550 are enough or am i gonna run out of injector. im only planning on pushing 20psi at most
have any of ya found or know the link as to were to find these famous 2g fenders flares from a black 2g with fender flares that has been roaming around the dsmtuner website? i think they look sick and would like to try it on mine
im in the process of doing an saturn alternator swap and was wondering if anyone has a picture diagram or can draw one of the best way to wire the alternator. i have the plug that has the 3 wires coming out of it.
Hi ya.My name is gabe and i live in texas. ive been around dsm's for around 2 years working on them till im able to do most of the work myself including rebuilding the engines and all the gud stuff. i must say even though these cars are high maintance i love em. when they are running good they...