Laughed so hard when I saw this! I was trying to be all incognito and take a picture while hiding behind the gas pump but I'm pretty sure he noticed me lol.
Tranny 500 oboTransfercase (matching) 180 OBORead Diff LSD 300 oboAll off a 95 GSX with 140k have lots of OEM parts left, full car for sale aswell.Justin
425-903-6102
Does anyone know how I can contact the guy that had the spyder at the meet he wanted to know about a transfer-case I had for sale. He said his name was darkspyder99 but I can't find anyone with that handle on this forum.
Thanks for any help.
That's on the other side of the mountains! Comin don't be scared go to Wal-Mart and buy you an 88 cent poncho and your good. This is Washington after all.
Do not waste your time with the 1g 2g piston rod combo as the wrist pins are different sizes and require machining. I would look for some evo internals if you want a stronger but budget lower end. You might be able to pick them up for a steal on evolutionm.net.
It's actually a stud and nut but yes you are missing one. Sometimes the nut gets seized on the stud and when you back it off it takes the stud with it Call Mitsubishi and order a new one.
Hey I have quick question about this oil feed line from RRE. My roommate had a hole in his feed line so ordered a SS replacement. My question is the hole on the banjo bolt seems really small is this really adequate enough to lubricate the turbo? Its a stock T-25. F
Your on the wrong side of the moutains bro! lol theres tonz in the seattle area. It's a drive but keep your eye out for a big event and drive over to check it out this summer.
Oh damn m I forgot where doing poker at my house sat at 6 I'll have to decide which one I'm going to do. I'll get your number from my roommate and send you a text to let you know what I decide.
I'm going to the Bellvue meet this weekend. I know theres a billiard place in lynwood not too far from the mall all the evo guys used to meet at we could give that a try and play some pool.
I think a rubber gasket would be a good idea. I don't know if I would trust a cork one with the crank pressure out cars see. Problem is I don't know if anyone makes a rubber gasket for 2gs
Incorrect! There are two SHORTER bolts that go in the front cover. One goes in a blind hole, and the other goes directly below the timming belt. Which is an open hole. If you put a long bolt in this hole it can rub on your timming belt and ruin it.I have a leaking oil pan after re-building...
Hey sorry I don't rememer if I texted you or not. Yes I do still have the side skirts they are in decent condition I think few scratches on the very bottom. They are however, missing the peice that goes on the bottom of the door. The wheels are stock they look kind of like a spiral and one of...
This is a good rule but I would even increase that number, the more research you do the more prepared you'll be for success. You cant expect someone to build your car for you over the Internet and give you a quick fix every-time something goes wrong.
It sounds like you are lacking supporting...
Nice intercooler mounting brackets. Real custom work!
P.S. It's kinda crooked but, thats the least of your problems.I never thouhgt I'd see someone driving around with spares on all 4 tires. I don't think I would even would use these on a golf cart. And wtf kind of paint job is that...
I already installed it and per the instructions in your link. However, after runing the engine the crank seems to be advanced a few degrees from the cams. I was wondering if it could be an issue of aftermarket marks on the gears and dampener or the timing marks on the cover being off. I guess...
Ok so I did the timing on my motor and everything lined up perfectly even after rotating the crank by hand. Now after the first start up it seems to be slightly off. I have adjustable gears but they are still zeroed in have.Could the hash marks on the timing cover be alittle off? Because when I...
Haha this guy had more laders on the roof of his car than I could count in the ladder isle at home depot. The best one stuck 10 feet of either end of his car and he was actually using the drive thru at starbux.
Well I fixed my problem using a jack breaker bar and a torch. I wedged the bar behind the pipe and against the transfer case and jacked the other end up pulling the pipe away from the pan. And then heated the radius section until it was glowing red and let it cool down. Here's the results.
Says the guy with 48 posts...As stated before don't buy a Greddy fmic just because it is a Greddy. Buy a Megan Racing or VRSF for less than half the price.
Evo 3 will not work its the wrong angle and the 2g is too constricted I'm going to pull the 02 and bolt the 2g on just to see if its the o2 Housing or the downpipe. I will probably have the radius on the downpipe flattened out at an exhaust shop.
Emailed punishment and they said it is a comon problem with the Megan o2 housing even know I specificaly asked them if it worked with the megan before I bought it and that I should just "flatten it out with a hammer where it is rubbing". WTF?
Haha. I wonder how bad it would suck to find out all of the people from your cars' enthusiast site (dsm tuners) knows you car already because, it's the laughing-stock of the area.