Hi everyone,I recently acquired some dual valve springs and retainers from a friend's part-out, but unfortunately he could not remember the brand. He essentially let his machine shop pick out parts for him and he had lost the receipts.So... if anyone can point me in the right direction as...
I recently went to sell some of my stock cams pulled from the engine in my talon, and I found that the cams are marked R1 for ex and R2 for int. The jdm hla regulator is present in the head, and when I investigated starter issues I found that it had a JDM flywheel. I found a long lost receipt in...
Hi everyone. I picked up a mostly stock 1990 laser yesterday and it was running fine until I swapped in injectors and an ecmlink ecu.I am measuring no power to the injectors, as well as none to pins 102 and 107. The battery backup and pin 63 both have constant 12V with ignition on. I tried...
I recently bought a set of gsc lifters and when I installed them on the exhaust cam after bleeding them down I notice that even with dks regrind cams that the lifters are fully compressed and slightly opening valves. Cylinder 2 and 4 are slightly open with the dowel at the 12 o'clock position...
Hi everyone I have an opportunity to pick up a used fp3052 with tial mvs and o2 housing for 1000$. The turbo has about 6k miles and ran 28 psi without issue.My question is should I jump on this deal or would I be better off picking up an internally gated 68hta while I can get one for only 650$...
Hi everyone,I have an opportunity to pick up a schwitzer s200 from a friend for 150$. Its from a generator with only 5 hours on it, but I'm worried about fitment. How does this turbo compare in size to an hx35? Would it be possible to use a t3 adapter with a stock or fp manifold and clear the...
Im in the middle of a dks 272 cam install, but I'm not sure about the lifter shims. Do the shims (essentially washers) go under the lifters or do they rest on top between the rocker?
Sorry.. noob question but I can't find the answer.
Hi guys I recently purchased some dks 272 cams off of the classifieds here and they have some unusual wear on the intake cam. It almost looks like the cam was skipping, and I'd like some opinions on whether I should run them. Images attached. The second image is a journal on the exhaust cam...