IIRC the 1G distick has a metal pull ring, the 2nd gen has a plastic pull ring that reads "engine"

I'd buy the kit, from you.....if I hadn't already bought it from you. Even though you called us by the wrong name. Sorry Brian I had to poke fun at that lol

EvoM huh?

He's in the freelancer section. His name is Adam, I believe his username is black_gst or something close to that

It sounds like you're using a M/T why are you putting Automatic transmission fluid in it? shouldn't you actually be using gear oil like 75/90 or close?

the piece of paper that comes with a new set of rings states that the marked side faces up. so whichever side has a marking (i.e. N150) faces upwards

A friend sent me this for my birthday a couple days ago. It made my day

It's this what you're looking for? http://www.glowshiftdirect.com/95-99-mitsubishi-eclipse-gauge-cluster.aspxI believe this is the one I bought for myself Maybe even this onehttp://www.streettunedmotorsports.com/parts/dual_gauge_bezel_2g_dsm.htmNeither of them cross the $50 mark.

Yes, generally easier and cheaper. I think some can be had for $15-$40

Performance wise I'm not sure, all I know is that most use it to allow them to vent the BOV to the atmosphere. As for plug and play? Not at all. You need a maft to get it to work.

Little Debbie and Mrs Freshley's bought the recipes from hostess. You can get them at just about any store. I just have yet to find the pies

Black_gst sells solid polyurethane roll stops. Prothane only dies sandwich insertshttp://www.dsmtuners.com/classifieds/freelancer-products-services-10/new-batch-2g-poly-roll-stops-51828/

I ordered extreme psi's inline oil filter kit and the line they gave me it's about 28" + a combined foot with the rest of the line and filter. The 28" is a good length by itself but the extra foot from the filter is too long for my tastes.

Don't do it. It'll probably be a scam. If your gut instinct tells you not to do it, don't do it. We've have lots of tuners get scammed by people with great deals and only doing moneygram. If he doesn't accept PayPal or some escrow service back out

Just heard the recipes and equipment are being sold to other confectionary companies. IIRC Little Debbie bought the Twinkies. It'll be renamed though. Not sure about zingers and ho-ho's

I need to see if I can snag it. One of my friends jobs has a "Bigfoot drive" it's a whopping 5MB and roughly the size of a phone book. Not thickness, just height and width

Most Montana members are lurkers. there are a few memebers but we rarely post in the local forums due to its lack of activity. MAECforum.com is your better bet to hook up with fellow Montana DSMers

Hey man Probabaly the easiest way to get any info or leads locally would possibly be MAECforum.com. yes, it's dominated by subarus and hondas with a few DSMers in the mix most of us in Billings.

I can vouch for Engines Etc. but they are heavily backed up right now. I have however alsoheard good things about hartung.

Then I shall patiently wait.......

Dammit Justin I was totally looking forward to more "scarf girl" pics

Actually, GSS342 is the part number for a walbro255. It was mentioned a long while ago when forced performance was selling their remaining fuel pumps. Seems that all you are missing is the install kithttp://www.dsmtuners.com/forums/vendor-announcements/443992-fp-fuel-pump-blow-out.html^^...

Call me crazy and it may be the angle of the pictures. Why does the gap look so tiny? It looks like it got smashed

performance turbo products I believe. It looks it anyways. They are listed in the supporting vendors list, second to last in the list

I believe the manufacturer is a supporting vendor on here. An I correct?

I kind if turned my siren into a red mage sort of character. My bullets heal. My phaselock revives and I get health if I kill an enemy while they are passed phaselocked. The Mechromancer, however, off looking very promising so far as well

In the console version, when you start a new character they start from the beginning. However, the game gives new characters their own separate save file. You can swap characters at any time at the main screen and go back where they were. Also just letting everyone know that the Mechromancer is...

I'm not experience it all with the PC version of borderlands but if it's anything to you back ups are your best friend

The bank is for you to store guns that you either think you may end up using later or want to give to friends. I use the bank on a regular basis to keep guns that I think are going to be very useful for friends I play with on a regular basis. I am what everybody affectionately call a loot whore...

A wideband o2 sensor measures the air/fuel ratio in order to tell you if you are running rich, lean or stoich. It is a must if you plan to tune.

Lifted gsx you say? http://www.youtube.com/watch?v=yFZ4NT7UdiE&feature=youtube_gdata_player

This is where mine are. I haven't had a chance to actually see how they look because my car is shown at the moment. Glowryder makes these

I may be wrong but the top 2 look like they are for an automatic. The middle one looks smaller so it may be for an AWD. The bottom is definitely for a manual transmission, however, whether it's for a FWD or an AWD I wouldn't knowEDIT: yep Like I said I was wrong. very VERY wrong.

I got myself a 2 ton hoist for $50 a couple days ago

That's your main problem. I've had problems with parts store valves in the past. If you want to test a new valve blow in both ends one end won't let any air at all. Most parts store will leak

Thank you. I really don't plan on going any father than 10-12psi. So the 1g line I found should work once I find some banjo bolts that fit

I remember reading that a 14b needs a restrictor would a fitting like this work? http://www.streettunedmotorsports.com/parts/oil_restrictor_fitting_garrett.htm or do you have a better idea for me to look

From what I can see it does have some scoring in the pistons. Whether it just needs a hone or an actual bore I don't know

I have a bare 97 block 6973955.

If I'm correct, weren't the 14b/16g CHRA's fitted with a restrictor already? I looked in 14b and there is only a small pin hole

If I remember correctly UT would actually be 4 x 4 not 4^4 because you can only put 4 different caps on each rod so it's only 16 combinations

I wonder of the non-bake type coatings looker cerakote apply to this. But, then again, I don't know if swain is a bake type coating or not

Your sounds like a life draining bit** complaining about a slice of Pizza and a $30 amp when you've dumped that much cash just for her. If it were me, I'd"remind"her how much money I just dumped carting her butt around and fixing her car. I must have got a saint of a GF, I've dumped $2k into my...

It really suns like there is a short in the wiring somewhere that could be leaching power. Does it start up the very first time when it's wet out? Or just period, whether it's moved or not, it won't start?If it is whether you drive it or not, you might want to check around the tail lights...

Holy Sh!t Todd, you still look at this site? I thought you lived stictly on BSS and MAEC lol

Conversation between a 1g owner and meMe: hey that 1st gen looks clean, what do you have in it? Him: just a 1.8L Me: Huh, cool aren't those non interference motors? Him: yeah I swapped it in because the original engine broke. (he said what really happened but I don't remember) Me: oh that...

They don't have to be put back in order just make sure to check the rockers for any sort of metal debris and remove the debris. This video talks about removing them without removing the head. I know you already have the lifters out but this talks about the metal debris so that you know I'm not...

Wow talk about a dead thread. There just aren't very many DSMer's here, Sad I know

I have one if you want it?

I have a Megan shifter and it too offers two throw reductions. I believe the only difference was that b&m also gave you a shorter shifter height