Ive searched google and have found only one site that gives a pn# for evo 6 piston rings and they were for a .20 piston. Im trying to figure out if I could use 2g rings with these pistons. I hate to purchase new pistons because they are oem brand new pistons. If anyone could point me in the...

I was just windering who else has done this job before lol. I have done about 4 so far and a few 3.1 L and have got it down to 4 1/2 hours. Thats with the cooling system full with no leaks. Is that bad.

This all startef today when I contacted a local dsm shop. I just asked where they had their machine work done and we started talking about different setups. O told him I was going to be running a basic 2g head with cams and springs, nothing special. The fieat thing he said was if i wantes to...

Just bored and thought I would ahow the comparison between the two pistons. There are a few differences that are pretty noticeable, the most being the secound ringland on the evo 8 is quite a bit thicker.The evo8 piston ia the used one on the rod. You can also notice the piston on the...

I recieved it in a kit with the a belt with the long block that I just putchased. I also have a headgasket and belt tensioner that I have no Idea what bramd it is.

I recieved it in a kit with the a belt with the long block that I just putchased. I also have a headgasket and belt tensioner that I have no Idea what bramd it is.

So heres the proposition...I have a set of brand new BC272 Camshafts and a decent set of the 5 spoke chrome gst wheels,(I'll post pics when i get to my phone). My guess i would say around 500 dollars worth of parts. I have someone wanting to trade me a 7 bolt motor for these to parts. The block...

Ive been wanting one of these forever now and I finally picked one up. This things bad ass, Ive taken flywheel bolts off, my brother inlaws harmonic balancer and his lugs lol. Pretty bad ass lol. Though going from my IR 1/2 to this is noticeable. Sorry for the random thread im bored lol

I know where one of these are. Its a red automatic and the owner is asking 800 for it. It needs a new transmission or a rebuild. The only thing that has stopped me is that i know 1g autos are hard to find. But i also have seen a kigly 2g to 1g trans adapter plate. I can probally get the price...

I was just windering if anyone else has ha issues with taptalk over the weekend? I havent been able to load anything from tunners on my phone through taptalk. Its not taptalk itself, I can get on other forums through it. its just tunners that will not let me get on. it usually displays a...

I was just wondering what everyone thought about this. Im considering polishing my 6 bolt rods and having a loacal engine builder shot peen them. Has anyone done this?

I have here 4 pistons that i believe to be evo 6 pistons. Ive looke myself and have found very little infformation on them. The part number on the box is shown in the picture. Any idea about these pistons? Are they basically just a 2g piston?

Looking around on ebay and check this out....man this is a nioce car. Mitsubishi : Eclipse Mitsubishi : Eclipse | eBay

So after 3 years of building my dream motor, and being so close to having it complete I had to sell my block and head for pesonal reasons. Its been a rough year with me losing 2 jobs and taking a almost ten dollar a hour pay cut. Things needed to be paid off and my wife and I had to make some...

So i knocked my tooth out last week when a breaker bar slipped and hit me in the face....not at work. J/w if it sucks. Not a big fan of the dentist lol.

Just want to know the stock deck height of a un machined 2g head. Thanks

First off I had a van come in to the shop today knocking like crazy. I pulled the pan off thinking i would find all kinds of metal shavings but all i found was what looked like rust pieces. So i put the pan back on and replaced the filter and put new oil in it. I started it up and it purred like...

http://www.amazon.com/gp/aw/d/B005EYBKMY/ref=aw_d_iv_automotive?is=lHas anyone used this kit before? Just looking for anyone with experience with this kit. Thanks

I just waned to show off some pictures of some work I've been doing to my 2g O2 housing. I do realize the O2 sensor is still in place, I'll have to remove that when i have a solid strucure to attatch it to, and yes i will be replacing it. My build has took a drastic turn since money has been...

So i was watching sons of guns the other day and they were builing a dual m16 setup with a watercooling system. So i was thinking, would it be worth trying to do the same thing to a intercooler? I know they have air to water intercoolers where the intercooler is submerged in water....i think...

Basically all i want to know is if i should do this before i put in my motor or afterm my motor is installed? I stiil have to buy my cams and exchange my hydraulic tensioner arm out, but once that is done i can assemble the rest of my motor. But should i focus on my fuel system right no and get...

Welll it has been a long time since i have posted in my journal so i figured i would add some pics now that i figured out how to do it lol. I have the bottom end almost completely assembled besides the timing assembly. I ordered the wrong damn tensioner when i bought the kit from extreme psi so...

I have a 99 gst and was going to use ceddy mods as my tuning solution when the time came. But the more ive been reading im leaning more towards ecm link for this. I know where their is a 1991 plymouth laser turbo and i believe it might have a eprom ecu. I havent looked at the case yet but when...

I'm using a 6bolt block and 2g head. and I know I have to trim the motormount to fit around the water the pump. But it looks like I have to take a hole bolt hole off. And can't figureouthow post pics to show everyone. Please help

will a 7 bolt oil pump drive gear work on a 6 bolt front case?

Im buying cams for my 99gst and i have decided on the delta cams because of the good reviews ive heard about them. My ? is which cams should i buy? Right now i plan on reving to around 85-9000. Thats if my valvetrain can handles those high of revs. I have manleys and ti retainers with 1mm over...

I have a holset h1e that needs a new compressor wheel and a rebuild. The compressor wheel new is i wanna say 135. But i found this posting on ebay and i was wondeing if i could use the hx-40 blade and compressor housing since my housing was ate up a little by the blade itself. HX40 Holset...

I need to check the timing on my na eclipse. Its a 1992 4g63 and i bleiev the timing is off. How do i check it if i cant get the car to stay running?

I have a 1993 non turbo 4g63 and the motor will turn over but will not start. We HAVE checked for spark and its getting spark. We have had it running and if you let it idle it just stalls out. The motor is also getting plenty of fuel. What could the problem be?

Well over the past year ive been slowly piecing together my project...99gst. I have all the goodies for the motor and what not but recently my dd just had the timing belt snap and BOOM.....no more 1995 honda accord with 310,00 miles lol...btw original timing belt. Any way as much i was trying to...

How can u telll the difference between the head on a turbo car and n/t car? My buddy just bought a 91 non-turbo and its barely ideling, and takes forever to start. I was just wondering if the non turbo head would cause this problem? The head has the bolt for the turbo feed line, and the motor...

I have a 1999 gst and my car is sitting with no motor so i figured this would be prime time to get rid of some clutter. I did not unhook any of the solenoids on the fire wall because i read they will throw a code of i do. But when the time comes i will be using ceddy mod as my choice of tunning...

Im waiting on bs bearings but once i get them in i will be ready for assembly. Its been a long year of collecting parts lol. But i was wondering what all do i need. I have purchase all permatex products because i have heard from my machinist that its a real good product. I have the copper...

Basic question....should i go with the delta 272's..will being using the kelford grind bc it was suggested by another member.....or BC280's? Our are these cams two different to really compare? And if i do go delta, is it really worth spending the extra 55 dollars a cam to go billett? What would...

My head consist of no port just a debur, upgraded hla's, SS valves, Manley high performance springs, ti retainers, and its a 2g head. I also have bronze valve guides. Im just wondering what would be a decent rev limit to shoot for. Im sticking with a fwd and its not my dd. My turbo more than...

Well its time for me to decide which cams im going to need for my setup. First off this is a fwd car. So i was thinking i will need something that will allow more hp at the top end. My head is built consisting of minor port job, manley springs, ti retainers, ss int. and exh. valves, revised 3g...

So my dd is starting to go down hill. I have a 95 accord that is my work vehicle. Under low idle the brake pedal will completely go to the floor, and thats the nly way to keep it from moving is to hiod it. But if you r going 55-60 and around 3k the pedal is firm...is this a booster issue? I have...

bout to buy a complete package deal from extreme psi...just wondering if i need the balancer pulley if i have deleted the balance shafts? dumb ? but i have no idea...lol...thanksno help at all? really wanna buy this tonight so any input would b nice

I have a 91 6 bolt block....is their a difference between the mighty max ofh and the original one? If not do i just buy the one for my year block? I also will be runing a large frame turbo...holset h1e...should i just save myself the hassel and get a rear facing one?

Well, its going on around 9 months now and my motor is just now almost done. I was going to send my head of to the dsm graveyard for them to clean and ssemble in exchange for my hx-35...but after countless bad reviews im just going to pass. Ill just try and sell my turbo and send the head of to...

I worked out a deal on some head work. Trading a hx-35 for all machining and assembly. No major porting, just a nice clean up of the cc chambers and some deburing. As of right now i have to order some new Bs bearings cause i f@@@ mine up. After i install the bearings, i will put the rest of the...

im just wondering which direction i wanna take my build since i am getting closer to having to make this decission. My motor wil have all the proper supporting mods to throw some serious power at it, i just need to know what you guys/gals think of the two turbos posted, or if their is any other...

i have a 7 bolt block that only has 98,000 miles on it. The balance shafts or in their still and i need to replace the ones i messed up trying to install them in my 6 bolt. Can i use the used bearings? I mean the only reason they are their is to block the oiling hioles right? And do you really...

I know you can use the hx-40 compressor blades on the hx35...but what about the h52 in the hx-40? Are is their just to big of a difference their? Im not extremly turbo smart so excuse me if this is just another dumb question to some of you, i would just like to know if this is possible.Ill...

I was wondering if the rod bolts for the arps can be stretched in the block.the vice i have will not allow me to torque them to 73 ft lbs. because it just wont hold it...i was wondering if i can install my rods and pistons and torque them in the block to stretch the bolts. I believe my paper...

So heres the thing. I was going to send my head off to mitsu graveyard but afer reading several reviews i decided not to. I will be doing the work my self minus the machine work of course. I will need the head resurfaced, checked for cracks and for warp, the cam bores checked, the seats cut for...

has anyone ever dealt with these turbo components? The have the compressor wheel i need for my h1e and its around 70 bucks. They sell a lot of their stuff on ebay but they have a site. Just wondering if anyone has dealt with these people.

so far ive been just ordering parts. Purchased my frontcase today and also just recieved my manley springs and ti retainers in the mail. Currently in the process of working out a deal on some head wor. I have a REALLY nice 7 blade hx35 but it might be gone if the deal goes through. O well...

I was trying to install my bearings to according the the vfaq on the site. I used the paper towels inbetween the bs bearing and the socket. I went to knock them in and i split two bearings. Do they make i tool a can just buy to do this? The front bearing isnt a problem...which i installed first...

I just purchased a hx-35..(and yes its in the classifieds, but only one hit) so imma use it. I know i could purchase a bep housing if i can find one. I sent timsturbos.com a email regarding this question. But i read in the holset facts that you could use the holset exhaust housing as long as you...