Ok here goes im am about ready to burn this car to the ground. For some reason if I drive my car as soon as I approach 0 on my boost gauge it feels like I hit a brick wall and my wb reads totally lean. This will happen at all times regardless of how much throttle I actually give. I seems to me...

I'm just wondering if anyone has tried this intake manifold. I'm thinking about ordering one for mine. Please don't hate just because it is eBay, I'm more looking for someone that has/had one and can tell me how it fit etc. Mitsubishi Lancer CE9A EVO 1 2 3 4g63 92 95 Aluminium Racing Qty...

Ok well I was hoping to say she is running again, but not the case. Finally went for the start up and just cranks and cranks every now and then it will catch for a second like it is going to start but then just goes back to cranking. I went into link and made sure my map and iat were specified...

Ok the first part is a copy and paste from my build journal from back when threads werent allowed lol.Ok don't really know what I'm doing when it comes to these build threads, but here goes.Ok it's a 95 gst 5speed. When I got the car it had all kinds of oil leaks and wouldn't idle, but...

Ok so I just got my built short block and will be transplanting the head etc over to it and installing it in the next few weeks. One of the things I'm moving over is my holset setup. I'm wondering if it is a bad idea to use a hx35 to break it in? My ewg springs are setup for around 20psi. Should...

Ok just finished my head swap and turbo install on my gst. I installed some delta h272s on stock valve train. After start up there was a horrible sound kind of like a spun bearing. Seeing as how I don't know how it could have a spun rod bearing from being parked for a couple weeks for the head...

Ok I have no idea where to put this so mods feel free to move it.So a couple weeks ago I finally blew my egay 16g at the track. While it was down I said screw it and went crazy ordering parts lol. I'm sticking with the 6bolt block stock. My 7bolt head I had checked out by a machine shop...

Hello I'm just wanting to get some input/advice from the forum. I’m rebuilding my 6bolt block and switching to a 6bolt head. I’m thinking around 350-400hp for now. I plan on getting all the machine work done Including hot tank, balance, deck, and hone the bottom end along with getting the...

Hello all I just started working on my SD tune after I threw my new injectors in. I installed the 680cc AMS(delphi) injectors I traded my evos for, and started completely from scratch. I did a small cruise and started using the tool to adjust my sd table. I know my table is a mess right now I...

Ok so here is the deal. I'm almost certain I'm lifting my head under boost. When I'm boosting oil is spraying out somewhere in the back around cylinder 4. I did a compression test and all cylinders were 170 except number 4 was around 120, the engine wasn't fully warm but decent number in my...

Ok I have a nx efi wet kit I got at a steal and I am installing it today. My questions are: 1-is it best to tee into the fuel line going from the filter to the rail? Will this mess with my afpr under spray? 2- do I need to get the jets according to the nx jet chart since it only says one thing...

Here are a couple pics I have available on my phone if someone wants to black it out for me. It will be painted in about 2 weeks. It's going wingless with a carbon fiber hatch and hood. I'll take some more pics Tomorrow before I start sanding it. The last one is for s&g lol. Like I said I'll...

Well I found this hatch on Craigslist ended up getting it for $100. It looked trashed but I thought I could fix it so I got it. When installing I found out it was a vis by the badge on the inside, I originally figured it was just a cheap eBay lol. I installed it already had factory glass in it...

Ok I've decided to switch to sd with my v3. I don't have the tuning finished on the stock maf yet because it is kind of acting up, so instead of getting another maf I've decided to go ahead and switch to Sd seeing as I've always planned to when I got better at tuning. I found a 3bar gm map on...

Found this gauge pod I'm debating buying, mainly because I despise a pillar pods and want them gone. This look nice to me in pics but I was wondering if any of you have purchased this and could comment on quality etc. thanks for any input. 95 99 Mitsubishi Eclipse Gauge Pod Custom 52mm OEM...

Ok here is a pic of how my bay started and where it is right now. Still a work in progress any pointers are appreciated. Also is there anyway to get rid of the power steering lines going down the driver side without losing ps?

Ok I'm trying to do a slight engine bay clean up. So far ive deleted the ac, emissions, cruise control (minus the black box still waiting on the non cc cable), and battery relocated to trunk. Now I'm wanting to relocate the fuse box. I know I seen a thread awhile back about moving it under where...

Ok so my egay 16g did great for dd at 16psi for about 2000 miles, but lasted 1 3rd gear pull at 20psi lol. So now I'm going to throw on a 14b until I can afford a real 16g. My question is what is a good boost level to run it at. I was thinking of going 20psi like on the 16g, but didn't know if I...

Well just got back from the strip from my first run ever. Was a little upset with how I did but oh well, it was fun. I really gotta get this thing tuned now this run I ran what you see in the mod list with 16psi on my 16g untuned other than the base idle. and my damn laptop died so i couldnt get...

Hello guys Finally bought my link and got it today. I bought it used off a member on here. Im still trying to figure everything out I have watched the videos on ecmtuning's website and read so many threads im going crazy.but anyway, like I said i got the package today opened up my ecu...

Ok today I installed my aem wideband, install was very easy and didnt take long. Then when I started it after the o2 warmed up I'm running anywhere from 17 to off the charts lean. I've got it installed in the stock location on the o2 housing with it set to p4 to simulate the nbo2, and wired into...

Hello just bought a AEM uego used from a local guy here and it came with a brand new replacement sensor. my question is, is this the right sensor? I dont want to fire it up tomorrow and it not be it, plugs in fine but when i search there is like 100 different things saying this part number that...

Ok don't really know what I'm doing when it comes to these build threads, but here goes.Ok it's a 95 gst 5speed. When I got the car it had all kinds of oil leaks and wouldn't idle, but I got a good deal on it because of the problems. Spent a day trying to fix the idle problem then decided it...

Ok first off this is one of those questions I had no idea on where to post, but here goes.I was driving in my gst and it was acting very weird like it didnt really have any power and when it got to where boost kicked in it fell on its face, while it was doing this I noticed my factory boost...

ok i rebuilt my motor with the stock stuff that came with the car but now that its doing good for now i wanted to start building a motor on the side with my free time/cash. Obviously since I have a dsm it will take a little time to finish lol, but i want the forums opinion. I can get a 4g64...

Hi first let me start off by saying to the mods I know it says don't post in newbs because it's busy but I think I've still got newb questions. If you feel it should be moved by all means please do.Ok now I've decided since I have a EPROM ecu already and it's socketed I'm going to start off...

Ok so I have a 95 gst 6bolt bottom 7bolt head. Right now mods include a 16g Wally pump, afpr, and front mount piping on the way. I bought a EPROM with a chip set up for 16psi on this setup until I get my injectors and a few other things then I'm going to send the chip for a retune. But my...

Hi I was wondering if anyone knew the best place to get some fmic piping. I really don't want a diy kit I would rather have bolt on just because it looks better usually and usually works a little better. I have the intercooler but piping im needing so far I email cxracing and they said they...

Ok so on my 95 gst there is a 6-bolt block with a 7-bolt head. Ive had the car around a month or 2 now, and when i got it had a really bad oil leak and it would not idle at all really. so i pulled the motor to go ahead and rebuild to fix all the oi leaks, rear main, cam seals, etc. In the...

Well been away for awhile since I thankfully gave up my RS-t dreams, but now I have a 95 GS-T. Long story short i got it about a week ago had a pretty bad oil leak and it would not idle. Thinking it was the MAS i changed it out with a buddies and it did nothing, but his has been parked a few...