Asking $3250 or OBOManual
GSX
75k Miles
Copper Durango Pearl
Grey Perforated Leather
Factory Leather knob
Factory infinity Sound (No CD changer)
Factory Floor mats in pretty good shape
Interior is 7/10
Exterior is 7/10
20g Turbo
Greddy Front Mount
Hard piping turbo to intercooler
Stock Piping...
So by making a sarcastic joke, i ended up being gifted a keyless, titleless 2ga GSX manual in copper mica pearl. I haven't even gotten it home yet, but from what i can tell, other than a small part of a strut tower and some interior surface rust, it is rust free and the body is straight. It has...
All,
Today I sold my pride and joy. After 6 years of owning a GSX, 8 years of owning a DSM, and always owning an eclipse since i was 16 (I had a 3g i'm sorry, it was a good price), I finally am without an Eclipse to my name. Hopefully I don't regret it, but the move made since for where I am at...
Selling my baby to try to move into the Evo X world. Tons of pictures and details on the craigslist add.https://detroit.craigslist.org/wyn/cto/d/98-eclipse-gsx/6694582901.html
1). Any boost, vac, or exhaust leaks?
No2). Verified mechanical timing? Yes3). Verified base timing? Yes4). Ignition system
Stock
2 years
bpr7es5). Motor health (Compression Test)
Cylinder 1:
Cylinder 2:
Cylinder 3:
Cylinder 4:6). Performed basic throttle body adjustments?
Idle Switch...
I am hooking up my knock off Greddy type-s and I am trying to find a good source for the lower nipple. I understand the lower nipple hookup "isn't needed", but I am not entirely fond of how it operates with the lower nipple open. Also, the lower nipple being open can create a small amount of...
I thinking of up-grading my wheel and tire set-up, but am having trouble figuring out what works without major modifications, and what looks the best. I thought it would be good to get a thread going that has a picture of wheel and tire setups with:Rim Size: (eg. 17x7)
Tire size: (eg...
So i am replacing my radiator with an aluminum one, and ran into these two (vacuum?) lines. One was already split and looked to be leaking for a while. I can't seem to identify which ones they are in the tech manual. What are they and do you think they have been affecting the car?
I recently installed a punishment racing knock off BOV. I have the removed the larger spring and have the light spring set fairly light. The car blows off nicely and low and mid boost levels, but at high levels (20+) it flutters some. My understanding is that flutter should be under low boost...
Found an interesting problem. The motor on the upper driver's side likes to loosen up it's bolts over time. I actually had to get new studs due to the old ones being destroyed by the mount rubbing against them. This isn't the first time I have heard of that joint failing. The studs actually came...
1). Any boost, vac, or exhaust leaks?
No2). Verified mechanical timing? Yes3). Verified base timing? Yes4). Ignition system
Stock
2 years
bpr7es5). Motor health (Compression Test)
Cylinder 1:
Cylinder 2:
Cylinder 3:
Cylinder 4:6). Performed basic throttle body adjustments?
Idle Switch...
Hey guys,
My hard work has paid off and I am now making more power then my clutch can handle (believe it is stock). I was in the middle of a pull and RPMs go ^ and no acceleration. I plan on deleting the accumulator and removing the check valve while I am in there so the pedal stops hitting me...
Since no factory decals exist anymore, I decided to take a chance on a slightly shady looking site for a reprint. Attached are the results. Overall, it matches pretty well. It looks a bit fatter in the picture, but it was closer. The surface seems similar and it appears to be spaced right. They...
Hey guys,
I am working on switching to SD and will need a new air filter since I will be pulling my MAF out. My problem is, I would like to keep my Megan intake. The intake has a 2.75" x 4.5" oval opening. I dug through K&N's site and all they have are round flanges. Any idea where I can get a...
1). Any boost, vac, or exhaust leaks?
Yes2). Verified mechanical timing?
Yes3). Verified base timing?
No4). Ignition system
COP or Stock Coil: Stock
Wire brand and Age: NGK 3 years
Spark Plug brand, type and Gap: BPR7es; .295). Motor health (Compression Test)
Cylinder 1:
Cylinder 2...
Hey guys,
I am in the process of turning up the boost to ~20lbs. I am using the factory boost solenoid and ECMlink and it is working awesome and I am really happy with it. 1st is currently at about 20 lbs spike followed by 17 lbs, 2nd hits 20lbs and holds at about 19, and then my issue...If I...
1). Any boost, vac, or exhaust leaks?
Boost leak tested 5psi above your max boost with no leaks? Yes2). Verified mechanical timing?
Yes3). Verified base timing?
Yes4). Ignition system
COP or Stock Coil: Stock
Wire brand and Age: 2 years NGK
Spark Plug brand, type and Gap: NG BPR6es5)...
Hey guys,
I recently completed a Evo 3 16g swap and I am in the process of tuning the car via ECMlink. I currently run stock injectors and stock fuel pressure. These factors led me to try to figure out at certain air/fuel ratios, what are my duty cycles and how far can i turn up the boost before...
First off:
1). Any boost, vac, or exhaust leaks? No
Boost leak tested 5psi above your max boost with no leaks? Yes2). Verified mechanical timing? Yes3). Verified base timing? Can't Yet (see post)4). Ignition system
COP or Stock Coil: Stock
Wire brand and Age: LC2 - 0 Miles
Spark Plug...
So I was following the guide of all the checks to do before starting to tune with ECMlink after my 16g upgrade. I went to check my mechanical timing and my crank pulley said 15 Deg BTDC. Hoping it was jsut the pulley spinning, i decided to pull the timing belt covers. Sure enough, the bottom end...
Hey guys,
I am in the process of installing a Evo 3 16G on my 2G GSX and wanted to share a list of parts that I needed to make it happen. I ended up feeding the turbo from the head and will be plugging the OFH feed. I have some extra parts on here such as new intake coupler, etc. but take it for...
So I went to start my car this morning after noticing nothing unusual driving the night before. It had a real hard time starting, first nothing, then stumbling, then finally started and seemed to run fine. Went to leave and it started bucking real hard around 2k RPM. Had to take the wife's car...
So on the way home today my car began missing and sounds ike it dropped a cylinder. If i shut the car off and restarted it went away briefly and then came right back. I have a freshly repaired ECU from ECMtuning and I do not have the CrankAS inverted. I have had this problem on a 98 ECU (my car...
I have been having an issue and it seems to keep getting worse.My car tends to seem to drop to three cylinders randomly. It happens in every gear and tends to be at lower rpms. Going to WOT while this is happening doesn't fix anything. At first it was only on the highway now it is hard to...
So it seems that when I let off the gas or am lightly on the gas I get a high pitched whistle noise from the front of my car. It is not engine speed and does not happen at idle or reving and letting off the throttle at idle. It seems to start happening after 10 mins driving or more.I...
From time to time, when I let the clutch out the car shudders under throttle and doesn't really accelerate. sometimes as soon as I shift it fixes itself, sometimes it will carry into the next gear. Boost seemed to be around the psi's it should be for that amount of throttle.This symptom has...
Have a CEL for the rear O2 sensor, heat circuit and sensor response.I replaced it (correctly as far as I know) and still have the light even after resetting it.Anyone else have this problem before?Doing some more reading, this may be caused because the O2 sensor is working correctly but...
Just completed (sort of) a boost leakdown test on my 2gresults:
from turbo outlet to TB inlet
-Piping seemed to hold fine
-BOV (1g) opened up around 5-10 psi.
-is that correct since it is not seeing the "boost" pressure in the top of the BOV?TB inlet
-would hold 5 psi max and...
Looking to upgrade to a 14b. I have full exhaust, intake, MBC, but all stock fuel system. I am running a boost gauge but not an A/F (yet).Is it risky to run a 14b at stock pressure (12psi) on a stock fuel system? Not looking to boost like crazy (yet) but I am pretty sure my t25 is in need...
So I would like to put a high flow cat of some kind into my turbo-back 3" megan exhaust but I don't want to weld in a tiny guy and add a bunch of restrictions.As long as i get a legit "high-flow" cat like a magnaflow or something that is the same size as my exhuast it shouldn't create much...
So I installed a 1g BOV today and did a BLT and found to my horror that I hear a dripping sound coming from what seems to be the oil pan.I have read a couple other threads but none of them seem to nail down what this could be.I also have gotten poor fuel mileage ~18mpg city and the...
ok so I pulled out my head unit and took a look at it because I was trying to make sure that the antenna power was correct. (It goes up whenever the car is on and it is annoying) It looked like it was so I put everything back and bolted it up.Now I have no sound out of the speakers or the...
I thought I would share...Just bought a 98 GSX for $5000120K miles
New:
Clutch (master and slave cylinder on a machined flywheel)
brakes
timing belt and tensioner
water pumpMods:
o2 housing
megan turbo back
MBC
some kind of non-recirculating BOV
lowering springs
intake
tubular exhaust...
Possibly going to look at a 97 GSX, leather, minor mods, 55000 miles, looks to be in good shape, comes with Evo 9 rims and brakes, needs a brake job supposedly. Other than that is "in good shape" It supposedly runs well and has had an ECM tune. Also included is a intercooler of some kind and a a...
Looking into buying this car. Don't have much more info then what is listed, still waiting for a call back.I'm not new to DSM's but not sure what this thing is really worth as I don't have alot of experience with aftermarket gear.I know that I have told people to buy stuff on here (it...