Okay so a little update on the car I got the ecu repaired but then started to question the wireing so this happpen as you can see in the pictures I’ve decided to rewire the whole car with a factory oem harness I’m wrapping this up soon I’ll post a running video on the the before and after thanks...

Okay for any one who is wondering when your mfi relay won’t activate he’ll send out the ecu I was right the ecu was messed up here’s the after of the above repair in the pictures I am going for start up tomorrow :)

Found the problem I believe, sending ECU to Tom @ ECMTuning. Awaiting their findings but that look’s like corrosion to me.

Okay so update I know I’ve been slow on the results to this topic I work full time as a technician I know I know then you should be able to figure it out lol …. I am going to go over what steve said in the next few days I will update results sorry I haven’t been able to get the information for...

Okay I will read your reply and focus on your information as I’m very appreciative of your input I’ve seen you all over the forums and I know your input is valuable so.. I will go over everything you said and post results late tonight or tomorrow Sorry my post was all over the place I’ll try...

So when my key is off my findings are like .85 .62 volts, when pin 82 sees 12 volts pin 38 goes high instead of low and doesn’t float around 12v. Key off either pin 38 with key on will see 8.5 volts and with key off pretty much 0 volts. I have power to pin 80, 12v there and tested to see if 12...

Sure haveing same problem

Do you still have the v3 for sale and if so will it work in a 97 modle dsm

Thank you DsmKauai I'd be very greatfull if you have one :D

Kinda wana stick with what I already have if any one is following along post pics of your a/c brackets we've gotta find one looking for the bracket at the top found on the 97 tsi and gsx models the pic in this post is what you all probably have and I aslo happen to have this style bracket but no...

Okay see I would do that but I can't do that because there isn't a threaded hole in my block for that bolt to line up to I'd have to switch axle shafts and use the spacer witch I already ordered from my work but then I'd have to buy new axles and I just don't know if the splines will fit my...

Hi everyone of the dsm comunity i have been searching for this what seems to be non existing front axle mount for a 2Gb body style 97 to 98 talons had there air conditionor compressor bracket bolt directly to the axle shaft meaning there is no hole at all for my axle to bolt to or align the axle...

What if the power transistor isn't grounded how would it react mine isn't grounded car was function fire order like trying to start but it took a lot to get going but finally started but then turned it off turn it over by hand because the misfire I'm guessing sounded no good but everything's...

Racing's racing right !! And you two always said seat time is what it's all about the more the better so there isn't many test and tunes down here so you might aswell go to where. The Racing's at so pm me next season and I'll come out :) ! I know it's far but I'd like to hit that track saw Jamie...

Hey you wouldn't happen to have a extra 97 awd air conditioner bracket laying around would you ??

Are you guys doing the force power shoot out this year I was going to look into coming out for this year for the stock appearing class how much to register and are you hosting an event this summer if so please let me know the dates mark and pat thanks hope the blackbird is still kicking but I...

i go to shannonville T&T let me know when your going i'll come out!!!!

yah dude im down i have a 97 and i JUST BOUGHT a EVO3 Big16G ,tublar turbo header and all the neccesary stuff to put it on so i'll have some pics for you along the way and we could show off our skills when we meet i'll send you a pm and a friend request keep up the good work man !!!Adrian .

yah man for sure i added you to my friends list im about to get dsm link you think you could help with some tuning after all your pritty close i'll let you know when i get the d link alright. im looking into a 16G set up soon to but tomaro i will be running on my T25 stock turbo setup at 13psi...

hey just sending a mesage out to see if we can make a good dsm turn out for the saterday night test and tune at shannonville drag way well here is my e mail for directions for thos intresred i will be checking this mesage befor i crash to night and when i wake up tomaro seeing how i am heading...

yes that would be awsome let me know if you can make it and yes 20$ run all night it's fun and cheap gates open at 6pm let me know if you can make it i'll be there for sureit's drag racing that night tho!

hey thats awsome if you need any help gettin it ready let me know should be a blast tho if you have any questions feel free to ask me and let me know if you can make it by the 15th of april if you can make it alright im curently trieing to get some people from where i live to come out ...

im watching this forum daily but seems alot of people have been viewing but no replys just wondering if any one was intrested in comming out with me to run some personal best times or just tune your car just let me know i will be montering this page up untill the 16th at 12am, i am more than...

any intrested????

im down for surei'll add my 97 tsi talon awd in the mix up hopeing to get a pic of it in a line up lets bring big numbers people and show these people that dsm on still living strong no matter how many haters there are haha. we have a date in july yet and a location and meeting time...

hey everyone come to the season opener and lets make a stand for us dsmers the gates open at 5pm and it's 20$ race all day. im trying to get as meny dsm's as i can to come out so please let me know if you will be able to make it lets try for big numbers if you have any questions my msn is...

yah i have a stock 2g setup puttin in an intercooler soon so i could hook you up with some stock parts when there available just let me know if you still need them kk ttyl

yah if you really have to have the cool sound the only way i know with out causing your power loss problem is to move the mas air flow to befor the bov in your i.c pipeing. using a gm mass because it can handle more air volume. also you will need a mas air flow translator to put the GM lingo to...

thanks for the suggestion but i endded up just placing the signal wire on all the screws and then i found the tach would regester but in reverse lol. so i switch up the signal wire once again and found it. i manage to find the ground on the back off my gauges aswell. now i just need to hook up...

hey !! im trying to install my tach and i was wondering does any one know if you can find a tach signal off one of the screws behind the gauges. my friend did it in his 1g but it was easy because it was labled TACH. and of course in the 2nd gen it's not labled any help would be great thanks...

does any one know if you can find a tach signal off one of the screws behind the gauges. my friend did it in his 1g but it was easy because it was labled TACH. and of course in the 2nd gen it's not labled any help would be great thanks...