I just picked up my car today at the body shop backed out of the garage and pressed on the gas and the car bucked and studderd alot but hardly went anywere. I got home safe but it was very hard to drive the car. At first when i started the car it was idleing funny and boging almost shuting off...
Hey, I was wondering if a steering wheel from an Evo 5-9 MR will bolt on to our factory hub? For a replacement from our factory wheel... thanksI've seen some pics of other dsm's with one of these so im just curious.
Im having this problem with my antifreez for some reason i had the car on for about 20 minutes and had the heat on blast but no heat.. The car was not over heating and was idleing fine. Its bin sitting for about 2 months but started up fine. I removed the radiator cap and it shot up at me with a...
im going to switch my intake manifold and TB to a 1g IM and 75mmTB but im just wondering if i can get some information on the install and what would i need for the install if any of you dsmers done it befor witch i bet you must have....:D how was it and what kind of gains did you get from the up...
help will be strongly appreciated...i was in the process of changing my rear brakes then this happens the lug nut key i have for my lug nuts snaped in half inside my rim i tried everything i can think of in trying to remove this peace from the hole but cainti was told to take off the...
these are the inserts im looking at to buy there from summit ...i have an idea on how to install but i need a lil help were do these go were do i install them...thanks
hey guys i serched and couldent find info on how to install a afpr all i found was some info for an areomotive afpr and that dident hep to much heres the afpr im purchasing i know its not the best of afprs but its what i got for now i need some advice to point me in the right direction for the...
hey guys i have a 1997 gst with original transmission all gears seem to be fine but 1st gear is a pain to get in i try to get it in feels like its in but as soon as i let off the clutch a lil it grinds hard:banghead: ill try to put it in 2nd and put it in 1st kinda hard and some times itll work...
ok guys ive read that you caint use your stock 420a pump with a turbo application....but when i installed my 255 lph it was sending to much fuel to my cylinders causing my engine stay on for about 30 secounds bogg down and stutter a lil and die at idle... while driving for about 2 minutes this...
hey guys i have a 14b turbo with an internal wasit gate with a mbc setup set at 4 psi but i was told that you caint lower boost on an internal waist gate is this true? what is the spring set at in the iwg? and is there anyway i can lower the boost and set it at a low psi? i know theres a screw...
my front o2 sensor ripped of the first day i drove my 420a turbo :hellyeah: and ever since the car has bin dieing on me every 5 or 6 minutes while im driving but starts right back up afther a few minutes.....i want to get one of those densos oxygen sensors thats are like 50.00 bucks on this web...
i had this problem ever since i finished my turbo install the car will turn on good and idle for about 45 secounds or so then stutter and die then i will have to wait a couple minutes then crank it and itll turn back on with no problem and do the same thing afther a few secounds.......when i...
i had this problem ever since i finished my turbo install the car will turn on good and idle for about 45 secounds or so then stutter and die then i will have to wait a couple minutes then crank it and itll turn back on with no problem and do the same thing afther a few secounds.......when i...
hey guys i need help as soon as you guys can come up with something.....i bought a ss line for my 14b turbo and the first one had broke from to much heat exposure from the manifold:ohdamn: so i bought a new one and it just came in i ran it around my engin and connected it to my turbo its a new...
i just got my fuel cut in the mail and installed it i bought it off ebay from someone who makes them he has sold alot and ive herd of good possitive feedback on these fcd's its a little black box with the screw on the side to adjust the volts...dose anyone out there have this fcd if so how did...
turbo instalaton was good went by it slowly and re traced my steps but the car is not cranking on.....i checked the battery brought it to an auto parts store and its fully charged i checked all the parts i installed everything is done perfect ....now im checking my fuel pump because i installed...
i need to remove my oil sensor so i can tee it for my turbo oil feed but i need a oil sensor socket witch i found info on that home depot has it i went today asked for it they dident even know what i was talking about i looked couldent find it and i called our local auto parts store they dont...
i need advice and some help with this problem quick i have a 14b turbo and im trying to run my new oil feed line but the thred dose not fit the turbos oil feed line hole the thred is to small ...the kit i got is from ebay heres a pic please help how can i run this feed into the 14b into my block...
i bin looking for a good 2 step launch controle chip or system for a while .....i have a turbo 420a what do you guys think....what will work best...and whats the cheepest im not trying to spend tooo much money i jusst want to see whats out there and what are my options thanks guys
i dont know if i did this right but i tryd to put a pic so you guys can see what im talking about ....but i have an oil return kit for my 14b turbo that connects from my turbo to the oil pan but what im confused about is witch fitting gets welded into the pan..and how dose every thing else...
i know this question has bin answerd plenty of times ive seen some of the diagrams and postings on this subject ....but i still need a lil bit of help i have a 1999 eclipse 420a turbo last thing to install is a 12:1 fmu i have the 255 fuel pump already...if you guys have any pics or info on how...
i know this question has bin answerd plenty of times ive seen some of the diagrams and postings on this subject ....but i still need a lil bit of help i have a 1999 eclipse 420a turbo last thing to install is a 12:1 fmu i have the 255 fuel pump already...if you guys have any pics or info on how...
ok my bro turbod his 420a this is his login i havent bin able to get ahold of him so im going to ask you guys this question i have the same car as him a 99 420a almost done with turbo conversion only thing i think im missing is an 12:1 fmu or a fuel cut deffender........would i be able to drive...
just bought these plugs they say to gap them each at 0.50 or something like that but dose anyone know or have done this befor what will be a good gap for them ...going to the track this week thanks:hellyeah:
im looking to make a next upgrade for my car and was hereing alot of good things about an upgraded 60mm throtle body i was told theres a nice improvment in throtle resonse and accelaration and better ET on the track...is this true and what would you recomend 60mm or a diffrent size ...? and if...
hey guys i have a friend he has a 420a hes installing the 14b turbo with a smic w/pipeing and he has all the lines and gaskets and boost controler,boost gauge he dident have enough money for a walbro fuel pump is it ok if he installs the turbo with the stock fuel pump for now and run a low psi...
ok guys i know this is a common question and is asumed to be answerd already but just bare with me this is my problem.....i have an automeeter airfuel ratio gauge i have installed in my car i already installed the 12v wire and ground it turns on and lights up fine the only problem i have is with...
ok this is my problem my car runs fine and runs strong with no issues that im aware of and has no past history of faliure or accendets or any type of dammege that can cause a overheating problem my car has never overheated before//The problem= for the last 3 weeks or so when i go to start...
whats up guys i need help with how to install the oil feed line and oil drain kit i think i have a clue on how to do the job but i just thought ill get some correct info first before i do the installation i would like some info on how to install these lines thanks guysby the way i have...
i am thinking of buying je forged pistons for my bottom end but need to know some info firstwould i be ok just buying the je forged pistons set
bore size 88.0mm (+.020" Overbore) compression ratio 8.8:1 (Boost)orshould i buy the same set but with the forged eagle rods ///i want...
JUST BOUGHT MEGASQUIRT FOR MY 420A :hellyeah:I KNOW ITS DIFF TO INSTALL BUT JUST WOULD LIKE TO KNOW WHATS THE PROPER WAY TO INSTALL AND TUNE?? I HAVE A LAPTOP AND ALL BUT I NEED TO KNOW WHAT I NEED TO DO FOR THE INSTALL THANKXS GUYS
hey guys i want to change my valves & valve springs and retainers///but want to remove the head so i can do it properly ive seen it done by someone on youtube but thay dident show when thay removed the head dose any dsmer out there know how to remove the head to get to the valves //springs and...
Ive seen a few people do this and just will like to know how i can hallow out my stock cat for highier top end speed. please be detailed and if anyone out there has done this let me know how you like it and if you can feel and hear a diffreance thanks: :thumb:
ok dsmers i have 1999 nt mitsubishi eclipse that i am trying to turbo i have a 14b turbo all the lines ,255 walbro fuel pump,smic with pipeing and 1g bov,420a turbo headers,38mm waist gate (dumped),downpipe,and a boost controler......what else would i need just to turbo my engin i know you...
nothing is wrong with my engin there is no noise coming from the engin at all im just wondering why the stock injectors have that clicking noise any ideas?
I am turboing my 420a and i am installing a smic with a 14b turbo from a 1g gsx and would like to see some pictures of any dsmers out there runing there turbo with a smic system thanxs
ok so i have a 1999 420a eclipse and was wondering if i can put a stock intercooler with the piping from a 1g eclipse . will this fit . i seen some 420a owners that put on there turbo kits with this side mount stock intercooler but wanted to know befor i buy if it will fit in my car let me know...