Damn alright well at least I know what it is now! That's scary because it could be one of those solenoid. I thought that plug WAS the solenoid ha thanks for the help! That video is what I need!
So my problem is that my car wont shift into 2nd or 4th gear. I was looking around the transmission the other day and found that the sensor I've attached in the picture was pushed into the trans. I tried pulling out but couldn't. Does anyone have an idea of what this is and where I can get a...
I have a 1g dsm auto awd.
It's lowered 1.5 inches.Ive gone through 3 axles in the past 3 weeks and I cannot figure out why. Like I put a new one in and it lasted 136 miles.. It's always the drivers side on the end by the hub. I have a spacer in between the block and then intermediate shaft...
Just started my new engine with a brand new AEM oil pressure gauge. Problem is the gauge isnt reading anything lol It reads with two side to side bars. Ive attached a pic of where the tap is for the gauge at the OFH.Is it in the right place? or is the gauge at fault here?
UPDATE 11/21/12Picked up a Hyundai valve cover yesterday. Only difference is that I have to get new outer bolts because the outside bolt holes are thicker.
UPDATE 11/18/12Not much happening right now. Ive been trying to source and get rid of my oil leaks and so far so good. I found out the nut that is on the oil pump sprocket came off so luckily nothing happened. I got a new nut and loctited the shit out of it so it should be good now. My other...
UPDATE 10/31/12So instead of buying a dump tube for the wastegate, I decided to make my own and it came out pretty decent. I dumps right where the downpipe curves to go to the back of the car.Im kind of worried about the heat from the dumptube so I sprayed the pipe with hi temp 1200 paint...
haha nahh they're just cheapo 12" red ebay fans. Actually pretty damn good for like $30:p Im probably gonna end up buying another one when summer rolls around just because its hotter but it will do for now since its cold.Im gonna end up posting some logs here soon. I only have it around 11 psi...
UPDATE 10/23/12So my slim fan came the other day along with my wideband. I ordered ARP Flex plate bolts so they will probably be here sometime this week.However I found a DEAL with my wideband sensor. I was searching around and found a guy on a honda forum that was in the same position to...
UPDATE 10/15/12Sorry its been taking so long guys, I've been in college and could only work on my car on the weekends. Good news though the car is running and driveable!I recently bought a custom t4 twin scroll manifold from the classifieds but needed a legit adapter to attach to my t3 hx35...
UPDATE 9/12/12So I havent posted in a while because I started college and really havent had time or money to finish the car. My dad decided to help out with the build so here it goes.I threw out the manifold I made because I suck at welding. Short sweet and to the point.
So I found a new...
Just got my o2 housing. Its actually really good quality, im impressed. I havent mounted it yet but when I do I deffinetly have to modify my downpipe to fit it. Ill have pictures of the downpipe later.
UPDATE 7/8/12So just finishing up the project now. I bought my other wastegate and flanges and welded them on. My friend described my engine bay as a frankenstein invention haha I must say I agree with him.http://sphotos.xx.fbcdn.net/hphotos-ash4/376242_10151878356230058_583789692_n.jpg...
UPDATE 6/21/2012Got the manifold welded up but im still waiting on wastegate flanges to get here.I decided to run speed density so I sold the 4" intake and the 2g mas. Im not sure if im going to buy another pipe with an air filter on it. Im runnin low on money so I might just throw the...
Well I couldnt find a 1 1/4 collector unfortunately and I really didnt want to make one so I might just make it work. I know its gonna look a little weird with a 1 1/2 collector but it wont affect spool in a bad way right?
So I bought 1 1/4" piping for my twin scroll manifold and I also bought a 1 1/2" pre fabbed collector. Now I was told by a member on here that he suggested 1 1/4" piping for the runners but they look a little small. Im just worried it wont flow enough?
The turbo im running is an HX40/HX35...
UPDATE 5/15/12Finally got some progress done.Installed my SX Racing AFPR
Tranny installed..again..lolStill in the designing process of making my twin scroll manifold but it WILL be done. Just got all the parts today. Ill have plenty of pictures when that is ready to go.
Yeah its short route but I honestly dont think its gonna hit the upper radiator hose. I had it mocked up and it looked great but its just hitting the hood:cry:Well I bought it off a guy on the classifieds about 2 months ago so thats a no go. Im confused of where your saying to put a 45...
So I bought this intercooler from a guy and he said it was a Punishment intercooler setup. The pipes however do not fit at all. The pipe coming from the throttle body kinda comes up at an angle making the bov pipe not sit where it supposed to. The flange for the bov is hitting the hood and im...
Yeah I saw that. Didnt Mr. peepers end up doing that or was it somebody else? I saw someone with one wastegate but it was divided up to it. I just dont want to buy two wastegates :(But I will if I HAVE too:D
So im actually in the beginning process of getting a ts t3 exhaust manifold welded up. I know you need a wastegate for each side of the manifold but I was thinking today...What if you can somehow weld a wastegate to the compressor housing side of the turbo:hmm: I was just thinking it could...
UPDATE 4/22/12Just found a welder that is going to weld me up a twin scroll manifold and o2 housing which is REALLLLLLY nice! Hx40 power with hx35 quickness AND twin scroll? This thing is gonna spool so quick!
UPDATE 4/18/12Bought some things and only need a few more to go.Punishment FMIC
BEPDSM7 manifold flanged with 38mm wastegate
Synapse Engineering wastegate
4" intake pipe
2g mas
SX AFPR
1000cc PTE injectorsDeleted all emission vacuum lines and made an egr blockoff.
Also deleted the AC.
So I bought an SX fpr but didnt realize that there isnt tap on the regulator for a gauge. Is there any other way to read fuel pressure? I have an 1/8th gauge made to fit an fpr but I cant use it
This is for an hx40.
So I dont have balance shafts in my car but I ported the oil filter housing so that my pressure would be back to stock. Im running my oil feed for my turbo off of the oil filter housing so will I still need a restrictor? and if so what size?
SCROLL DOWN FOR NEW UPDATES!
SCROLL DOWN FOR NEW UPDATES!
SCROLL DOWN FOR NEW UPDATES!So everyone I've decided to go with a big turbo setup. The mods I had on it were a Small 16g, PTE 680cc injectors, Ported 2g exhaust manfold, Ported Evo o2 housing, 3" turbo back, Ported gasket matched on...
Its definitely not low on fluid. Im pretty sure the clutches are fried because sometimes it will go a little bit but it will stop moving. So I guess new tranny it is :(Actually what about torque converter?? What are the symtoms of it failing?
So heres my problem.
I developed a huge tranny leak the other day, the green metal boot on the transmission on the passenger side where the axle sits in started to come out. All of the bolts were gone. I have no idea what happened there but I had another tranny on hand so I just put the bolts...
Yeah I guess that would make sense about the grounding. I just thought maybe if would have hit the fuse first and blew that. But luckily I dont think I destroyed them, just the dimmer. I did the foglight mod on the button and I knew that is working cause my foglights.
So long story short I was doing a little drift in a little stony area off of a road and when I went to pull out I ended up hitting the front of my car really hard on the road. The road is a little raised up because I was off road. But as I was going down the road I start to smell this weird...
Well after all this time I found out that I had a 90 ecu and are in fact different from 91-94 ecu's. All's I had to do was switch pin 6 and 14 and now im good to go.
I havent done a good BLT in about a year now. I know for a fact I have a little one at my exhaust manifold because theres a broken off bolt but thats been like that before I bought this ecu with dsmlink and it ran fine.
I guess it wouldnt hurt to do the test anyway maybe im missing...