Hey guys I just picked up a clean clean clean cllllleeeeeeaaaaaaannnnnn 1990 1GA talon AWD shell the other day no motor/tranny. Goin to be swapping Motor/tranny/ecu/interior/ect out of my 1994 Talon awd into the 1990 talon awd. My question is, can somebody help direct me a thread or website that...
Hello I installed my AEM Uego A/F gauge today and upon starting the car the A/F ratio was jumping between 13.0 and 15.0 after driving it for a while it became more sporadic jumping everywere and sometimes even so far rich/lean it couldn't even process it on the gauge. As I come to an idle after...
Kinda weird, I didn't know they made an eprom in 94. I pulled out my old ECU from my 94 and it turns out it is an eprom ecu with part number MD304484. Did they make actual eprom ecu's in 94 or is this some crazy anomaly? I thought it was only made in the early 90's models? ie 1GA?Ecm??? -...
Ok this is weird, i installed dsmlink the other day and when i drive my car and even hit 1psi of boost i get a check engine light that pops on and doesn't go away until i push the clutch..... It only goes away when i touch the clutch ....verry verry weird. Please help and if i need to post a log...
ok so i took my car to my mechanic because of my ridiculous idle and,1. Nothing happens when we unplug the Mass Airflow Sensor.
2. Nothing happens when we unplug the Idle Air Control Valve.
3. When we unplug the Idle Speed Control Valve the idle stops surging.He adjusted the isc...
HELP, I am adjusting my biss And i cant seem to get it from surging while im trying to adjust it.1G BISS AdjustmentAcording to the VFAQ i need to ground plug 10 on the diagnostics plug, It shows 4 plugs in the picture and I only have 3. How do i know if im using the right one? Do i just...
Since the handeling thread is ever so bumping i will post over here now. Im looking to lower my car roughly 2" all around and i was wondering who here has had sprint springs on their 1G AWD? Is Sprint a decent brand? Can you please post pics of 1G's with sprint lowering springs please??? Thanks
Im looking to lower my car roughly 2" all around and i was wondering who here has had sprint springs on their 1G AWD? Is Sprint a decent brand? Can you please post pics of 1G's with sprint lowering springs please??? Thanks :thumb:
Dropped her off at the Mitsubishi dealership today to get the complete timing belt and water pump and balance shaft service done. Also getting all new oil seals and passenger window motor so i can actually roll down the windows now!!!!! I miss my car already.:boring:
check out my mods.... Installed everything and everything is tightened down perfectly it just wont make boost for some reason. My 14B was faster than my 16g... when i get into boost it feels like it is boosting just ever so lightly for some reason, i am reading 14psi but why is it so much slower...
hello I am looking for a good REPUTABLE brand to order a set of injectors from. Now i want ONLY "Bolt On" injectors, I have heard horror stories of people purchasing injectors and having to drill out fuel rails and such.....I don't want to do that. What about FIC? and good/negative reviews...
New rims/tires, New clutch/flywheel, New turbo/manifold....so on and so fourth....just wanted to share since i havent posted in quite a while.Happy DSM'ing
So i found a guy on craigslist who has a "Brand New" 3" punishment racing recirculated O2 housing. Now i cant find anything online that even says anything about punishment racing having a 3" O2 housing. Does this guy sound legit? Im going to get it tomorrow morning if it is.eclipse talon...
Just bought a FP manifold for my 16G and under closer inspection I noticed that there is rust in the inside of every runner. Is that bad? How do i get it out, Sandblast the entire manifold and then have it ceramic coated?
I got an MHI evo3 Big 16G turbo for $275 the other day and now i need a new manifold. What would be better A Forced Performance Manifold or an Evo 3 Manifold. I am buying it from a friend and there is only a $50 difference between the two but for power output and flow and spool time which would...
Hello I have a question, I recently did the vacuum delete on my 94 TSI. And i was going to be ordering a EGR blockoff plate, now my question is, Is there a plate that just screws into were the EGR valve went? I Dont want to get a plate that i have to put between the EGR and block, I just want a...
SO I was trying to replace the Knock Sensor on my 1GB And I was lightly moving the main wiring harness and the EGR Temp sensor wires pulled out of the sensor plug. So, if I leave it unplugged will I have any driveability problems? Also I assume that it will throw a check engine light, I have a...
will a stock TD05H form a 94 TSI fit onto my friends 96 GSX? His turbo is toast and i have a second turbo laying around with no shaft play so.... Will it bolt right up to his 2G manifold or would he need a 1G manifold? And what will be the difference between the stock T25 and the stock TD05H>?
SO this is what my car is doingWhen i start it it revs to about 2k - 2.3k rpms and sits there forever, then it will fall to about 1k rpms and then surge back to 2.5k rpms and then fall back to 1k repeatedly.AndWhen i am driving it does it also, like, i go to shift between gears and...
<Turbo> Knock Sensor, Is the only code my car is throwing, i am replacing the knock sensor but my question is, Is there any way to get to the knock sensor on a 4G63T without having to remove the intake manifold?AndStill runs like crapola and wont idle.Still Blowing black smoke...
So can someone direct me to a sight to were i can order myself a pocket logger for my car, and also....what are people using for the programs for those things? Is there different kinds of car logging software? Which would be the best for a 1GB AWD TSI?Thanks
Crappy ass cell phone pic but it works for now.As of this past weekend i got my hands on a punishment racing short rout Front mount Intercooler kit, off of craigslist. $for 250 i got the FMIC and he even installed it for me.:hellyeah: Install was kinda a Pain due to A/C and ABS...
So everything is clunking around in the engine bay especially when i let out the clutch. So i was going to be upgrading the mounts. So Should i just get a set of polyurethane motor mount inserts or go with a complete Avid Racing Billet Aluminum Motor Mount set? there is about a $200 dollar...
since my 94 TSI has a viscous rear LSD doesn't that mean that only both back wheels will spin at the same time as the fluid in the diff gets heated up or enough force is applied to the diff fluid that it hardens and causes is to be AWD? My car is AWD but for some reason i managed to do a burnout...
So, i have had my car for about 4 months now and it consistently gets about 10mpg in town. I have done a complete tune up on it since may. (all new belts, COMPLETE fluid flush, Plugs are good...etc) I have seafoamed it, and tried injector cleaners But it is not getting better at...
Hello I was poking around underneath my car yesterday and i noticed a weird wire hanging freely by my downpipe. Now, from my findings that is a O2 sensor ground wire. Now....I am assuming that that needs to be reconnected and that that should help my gas mileage a little bit. Were exactly do i...
New mods done to the car the other day........(Holds breath)...............I got a 3" turbo back exhaust installed W/ test pipe and I removed the BCS and now i see 10psi at around 3500... WOOT!!!!!!!NO BOOST CREEP!!!!!!!!that is all.
Now i am going to be upgrading my exhaust system as a first mod to my car. I can get a full 3" turbo back exhaust for a decent deal. Now my question is (and i have researched) how exactly does a 3" turbo back exhaust cause boost creep? Is it guaranteed with a 3" turbo back? And am I required to...
So I narrowed my exhaust research down to an HKS Hi-Power exhaust. My question is to whoever has this setup on their 1G AWD, How do you like it? I have read about the deterioration they can have, and i am not to concerned because they do not salt the roads here in Oregon. Any reviews on this...
Just wondering if you guys have had a couple "warm up" cars before you gotten into your DSM's?I want to see your "warm ups"My warm up car.....(got the rice out of the way early)
Hello I was going to be upgrading the radiator on my 94 TSI AWD because mine is in really bad shape. Now i wanted to get an aluminum radiator rather than another plastic denso. SO my question to you guys is: What kind of aluminum radiator would you recommend? I was planning on getting a...
This is weird, i was getting an all wheel alignment the other day and when they had the car lifted off the wheels they were spinning the rims to do something and when they spun the wheels only 3 would turn, and the driver side rear wasn't spinning when you would turn another. Is that bad?
:hellyeah::hellyeah::hellyeah::hellyeah::hellyeah::hellyeah::hellyeah::hellyeah::hellyeah::hellyeah:And 1.5 months of not being able to drive the beast, she lives again!!!! so for 2k my dsm Got the tranny rebuilt,Brand New rims and Tires, and brake pads.....lol doesn't seem like much to...
So i went outside to start my car today....it started fine but it reved at 2k which is weird....then it sputtered out and died..... Restarted the car and it did the same thing but when i released the clutch it lurched forward and died when it was in neutral... Restarted it again and now the car...
SO.....my beautiful TSI is no longer running. :( As of yesterday either the clutch exploded or the tranny decided to take a dump.....but i have nothing past 1st gear now :cry::cry::cry::cry:It grinds on deceleration, grinds trying to go into gear.....then it just wouldnt do anything at...
DSM small 16g/evo 3 manifold/j pipe *pics added*good deal for some decent power? If i do get this setup am i going to have to get some different injectors?
Any review and feedback is highly appreciated!!
So i bought some seafoam today so clean clean out the gunk in the engine.....i followed the directions as per google.... but my thing is, is that i put 1/3 in the gas tank, 1/3 in the oil and it said to put the other 1/3 in the PCV tube and let it suck into the motor.... Mine didnt suck into any...
1994 TSI AWD gave me solid 150psi in all cylinders :hellyeah: From what i read, stock is 164, so after 15 years it is still pretty solid... No real point to this....just wanted to share!!!
So for some reason it wont let me post in the suspension forum, and i have no idea why...but here goes my question.I was reading around and saw a couple posts saying that if you lower our cars that it doesn't improve handling performance and that it actually makes it worse. Now why is this...