Bringing it back. .. still have these parts

Agreed

I picked up a Windows based tablet for $100 on black Fri then got a $5 usb adapter and I'm able to run ecmlink off of it. So buying some app to use via Bluetooth doesn't seem that good when nowadays its possible to stay with link.

Agreed about greddy being over priced and mediocre. After having some greddy parts fail on me I have rid my car and garage of greddy. As for relocating as others have said ita not needed. You could get a fwd facing oil filter housing and use your run of the mill sandwich adaptor.

What do metal detectors have to do with this thread discussing passing state inspections? Just curious.To all others I'm driving my car finally. My fix was I moved from new york to florida. So after my car sitting on jacks for close to 4 years I am happy to say it started right up and now has...

Well as for my car ecu is fresh from ecmlink so I doubt that's my problem. To the op I can start mine up right after I turn it off as well but if I let it sit for any amount of time it won't start. It will crank but won't start.

My car does this as well but only after I have drivin it for around 45+ mins. Then it has to cool for around 30 min befor it will start. As for my starter I replaced it a couple years ago.

just started with ecmlink and would like thoughts on my logs. I do have a wideband but is not wired into my ecu yet because I plan on swapping out the aem for a more link friendly wideband.

This Saturday is wjrr's earthday birthday and wondered who all is going

I am in the middle of installing my x-line radiator and have the fsn shroud with mishimoto's slim fans. I will take a picture tomorrow and post it showing how much room there is. The only really tight spot is my lower intercooler pipe which I might try to position a bit lower. I also plan on...

Yes I had to fight to get the passenger in and gave up on the driver side because I was goin to be late to work and my caris my daily. I by no means am Iimpressed especially after so much praise from the dsm community.Update... well took some pictures of the holes being off to send to wedge. I...

So I finally got some wedge engineering brackets for my evo recaros. I was happy since I've only heard good things about them here on tuners... until I went to install. At least one rear hole on both driver and passenger bracket is off. I managed to get the passenger seat and bracket installed...

I'm not in orlando but in spacecoast. My car is a dd/project... I've also noticed not many dsm's around are part of the dsmtuners comunity and are just every day stock drivin cars

Spent a good portion on my car Stm- Mishimoto xline radiator Samco hoses Gates water pump and oem bolt kit Gates timing belt kit Pte injector seak kit Fuel pump rewireWedge enginering - Brackets for my evo recaros (finally)Dsmtuners- thank you AWD Devious Mishimoto fan shroud CoilsAnd I...

What about front and rear brake calipers... pm me

I cut the cord about 4-5 years ago and use the old antenna to get channels. When I lived in northern NY I only got a couple channels but have an extensive movie collection. Now that I've moved to Florida I'm still using the antenna but get a lot more channels and if I would get a better antenna...

I haven't replaced all the parts as the op but I'm having the same problem as well. Also when car is off I can cycle through the gears without pressing the clutch in but not with the car running. So I'm definitely wondering what would cause this.

Any resolve to this? Just wondering since my prosport gauge has started reading from 40 psi up to 100 psi

So where do you connect the bottom fitting to

Called the shop this morning and got great service from Brian. So noe I got some new parts to throw in when they get in :D

I to sent a pm and am waiting for a reply

also have a brand new battery installed since I haven't replaced it in a while. here are some logs I got some are on the highway and some are on a regular street driving around 45-50 mph

where and when... I just moved down here from ny last july and live in palm bay. don't know if my spyder will be out though.

Let's update your post "a new one from mitsu is permanent if installed properly" now that would be great if mitsu hadn't discontinued that part years ago. So getting a new one is a no go.To the op... check out one of our venders here miller imports. For a time he was selling strut towers off...

Well that's good to know. Though I still swapped out my ECU for my EPROM with link. I'm still unsure of why MPI is clicking and battery is draining.OK new relay installed, DSMLink in a known good ECU but still have the relay clicking, need help

Agree 100%... carbon fiber is strong but expensive for it to be done right. As for strength if done right it can withstand a lot. For example the UAV drones flying around are made of carbon fiber and they are firing missiles from them while in flight not to mention the airframe taking all the...

Long board and you can pick up the basics in a couple hours. From what I've been told you don't want to start out with a short board. Yesterday I was using a 9 ft soft top board. Crazy fun... I'm hooked

Any body go to this or are going to watch the surf finals tomorrow? I went today and got a free surf lesson from Ron Jons and then they picked me and three others to compete in front of everybody with what we learned and I placed 1st. Pretty fun tomorrows the last day. Its at the cocoa beach...

So here is some background info.I hadn't driven my car for 3 years in NY, moved to Florida and put my car back on the road. Drove it for a month and started to hear clicking coming from under the dash. Weird thing was it was only clicking when I used the ebrake and the car was turned off. I...

As I've said before I see quite a few dsm's but I don't think many are on tuners

I have some grey interior panels including dash. Also an automatic awd trans, transfer case, and LSD rear diff. Let me know if you might need anything else.

Yes it can be done. There was a sick candy red eclipse that did it with his hood. I will have to see if I can fine the pictures.

Palm bay off of Emerson

So I'm starting to see more and more 2g out and about and 1 1g though I don't think many of them are actually here on tuners. Finally got a house in palm bay so now I got a garage again. Just need one of the aviation places I put it my resume to to hire and I'll be all set

simple upfront question.... My rear glass has become disbonded from the convertible top. Other than the obvious replacement of the top what have people done to rebond the glass back to the top to get me by until I can afford to get a new top?

well since it has many months since the op posted I will say I will start this venture once im am into a house and not living in a motel... so that should be soon hopefully

Just got back from vero beach and I must say not that far of a drive especially if I end up working down there. Took a1a back up to Melbourne. So was there any more info on when the monthly five guys meet in palm bay is?

so I seen a white 2g spyder for sale in the palm bay walmart parking lot off of i95 then when I was taking the new haven exit in Melbourne I saw a blue 2g along with another white 2g. so far I haven't seen any 1g yet. so there are a few more dsm's out there. now if they are part of our community...

whens the five guys meet?

well im staying in Melbourne right now

So the car is officially back on the road. So where does everybody hang out at ... I have only seen a few dsm's out and about.

The car is plated and back on the road oh hells yeah

So I got a temp plate here in fl now and drove it across town to the nearest "DMV" to get plates and I must say its nice to be driving it again

Playing the waiting game for round two at the local 'DMV' to get plates... oh the joy but at least I get to drive my car here unlike in new york

Well I just moved down from northern new York. Still looking for a house and currently going through the fun of sitting at the DMV for registering my eclipse from ny to fl. So hello Florida

haha the "house" light... I can say i've never seen that before until now

a lot of excitement came to me yesterday im ready to head down to florida Monday so I can roll it off the trailer then get it registered and plated then throw in dsmlink and start tuning and driving. Then im off to getting my bastard 20g rebuilt and throw in my bigger injectors. Its a great...

any updates to this? Ive been contemplating doing one as well since I don't have my latch anymore

So my spyder has been sitting on jack stands for close to three years now due to not passing New York's state car inspection for emissions. Well I started putting everything back together getting it ready for the move down to Florida finding only minor things that need to be addressed. I got...

I got some tan and some grey :d