I need a 7 bolt motor, I need just the head and block. I don't want to buy a blown motor I need one that runs, I don't need any of the manifolds. If anyone has one please PM me thank you.

Just did a A/T to M/T swap, I tried putting the speed senor in the 5 speed trans and it is too long. I've looked on multiple sites and it looks like there is only one speed sensor I could buy. If anyone has any info on this problem please chime in!

I've been trying to wire up my slim fans and I've tried everything. I checked the fuses because I thought I might have blown one if I wired it wrong the first time. I'm pretty sure it's wired up correctly now someone correct me if it's wrong please. Take a look at the picture.

I'm looking for a daily and came across this 1995 eagle talon TSI how bad is it to replace a input shaft seal

I'm looking for a new radiator and I've been leaning towards the punishment racing kit. I called them and asked and they said since my gst is automatic I either have to loop the lines or run a tranny cooler. How do you loop tranny lines and what does this mean haha also I'm just running the...

I hit a deer about 2 weeks ago and have finally collected some money. I got a new hood and bumper I just need a new intercooler and radiator support. Only the top of the support is bent in. My question is do I need the support installed by a shop or can I just do it myself. How hard is it to...

So I lost my lug nut tool for my lugs and I'm not sure where to get another one or if someone happens to have the same one as me. It would be a great help as my tires are bald as shit and i need to rotate them.<a href="http://www.flickr.com/photos/47026088@N08/4461221862/" title="droid 283...

I search the classifieds and all I come up with is 1g cables. I know I can use a palm M 105 but do I need anything else beside the cable and palm?

<a href="http://www.flickr.com/photos/jontrimboli/4440712871/" title="DSC_6545 by jonathan.trimboli, on Flickr"><img src="http://farm5.static.flickr.com/4011/4440712871_818ee66ab4.jpg" width="500" height="123" alt="DSC_6545" /></a><a...

<a href="http://www.flickr.com/photos/47026088@N08/4306938806/" title="085 by slow gst, on Flickr"><img src="http://farm5.static.flickr.com/4040/4306938806_3dc9176dca.jpg" width="500" height="375" alt="085" /></a> Day 1 back in april.<a...

I just replaced my speed sensor 2 months ago and it worked fine but now it just sits at 0 again. Can that gear that its connected to get stripped or break off and cause it to not work? I don't see why the sensor would be shot it's 2 months old. I have an auto trans if that makes a difference..

Would the 3" punishment racing downpipe bolt up to a thermal exhuast. I just got the catback today and where it would bolt up to the cat it necks down to a 2.5". So I'm not sure which downpipe to buy or what people have done about this..

Getting a new exhaust and I was curious if I needed any gaskets or flanges. I am buying a new o2 housing, downpipe, and catback exhaust so if anyone knows if I need any bolts , flanges or gaskets please let me know.

Getting a new exhaust and I was curious if I needed any gaskets or flanges. I am buying a new o2 housing, downpipe, and catback exhaust so if anyone knows if I need any bolts , flanges or gaskets.

Is there a good write up anywhere for this there are a ton of threads about it but not a whole lot of actual tech articles about how to do it. I checked vfaq but their link no longer works..

I recently found out that my rear main seal is leaking. Does anyone know how much it would cost to replace this or if I should just do it myself.

I took the car out for the first time in 3 months today and it is running veryy lean. Even at WOT it runs lean, I need some help.:ohdamn:

Alright I'm in the market for a new exhaust. What I would really like to do is buy a evo III exhaust mani evoIII 16g and the evoIII o2 housing. So my question is can I run a 3" megan racing downpipe off that o2 housing because on extremepsi it says "*Note: Some downpipes will require...

Where can I buy a real EvoIII 16G turbo with everything ported?

I am looking to get a new exhaust installed and possibly a new timing belt if I can't figure it out. If anyone knows of some good shops around central NJ it would help.

Can someone tell me how to replace the power steering and the alternator belts. I've searched around and all I can find is timing belt installs.

The car has been running really bad at idle since i bought it 3 months ago. I installed all new dejon powerhouse intercooler pipes and a 1g bov with a stop leak kit. I also recirculated it and it still runs like shit. I changed the plugs I'm not sure if changing the wires would do anything but...

does anyone know the part number of where i can order one? I just need that little rubber hose that goes from the bov and attaches to the intake.

ok so i need new motor mounts because mine are shot. i wanted to know if there is a website or anyone who sells the mount with the poly inserts already in the mount itself.

Ok I've done my searching on white smoke coming from the exhaust and it looks like my head gasket is blown. How hard is it to replace and where is a good place I can pick one up?

Ok so when I lock my car I can't unlock it from the drivers side. I have to goto the passengers side and unlock it there. Any ideas on what's wrong?

My car is in need of a new paint job. So I was thinking of doing like a satin black but im not sure how it would look if i got a carbon fiber hood. If anyone has any pics of what this might look like, or even a 2g eclipse painted satin black it would help a lot. thanks

What exactly does the translab shift kit do? I've been thinking about buying it, just not sure what it does.

Ok so 2 months ago i replaced my friends starter on his gst with a brand new one. We went to the track yesterday and he blew his clutch, so I am asking if maybe clutch particles got into the starter. If so how can you clean a starter?Thanks Jon

Is an ACT 2100 clutch considered a stage 3 clutch?

I was looking on Extreme PSI to order some new mounts because all of mine are shot. I was looking at the prothanes and came across something I did not really understand..EXTREME PSI : Your #1 Source for In Stock Performance Parts - Prothane Motor Mount Inserts: Mitsubishi Eclipse 95-99 M/T Only...

I have an automatic transmission and when I put it in drive it sort of bangs into gear really hard. Any suggestions?