searched and couldnt find a decent answer. car is a 95 tsi awd. i was driving home last night and i was coming up to a stop sign and all of the sudden the rpms drop and it shuts off. i start the car back up and drive away fine but if i let off the gas it dies. i checked the couplers and they are...
ok turns out the slave is fine. i also adjusted the rod on the master just like in jacks transmission video. no it seems to work but ive heard of pple with the act 2600 street disk that they will make these adjustments and it will work then it will stop working which is what has happend to me...
i replaced the master and it worked great. then i let the car sit for a few hours and went to try and move it and it grinded in reverse and wouldnt let me go in. when i bled the slave i took out the bleeder and pushed in the rod and put the bleeder back on and the rod didnt return like it said...
i maxed out the adjustment rod on the master and i can still push the slave in. it takes some force but it can be done. its also a new slave. im going to get a master cylinder next and if that doesnt work im going to get a ss braided line from stm. it has to be hydrolic since i adjusted the rod...
yea i bled it just like u described. im thinking the clutch isnt adjusted correctly since it now has a heavier pressure plate on it. i will have to try that then see if that helps. its just so frustrating. should i add some syncromesh to help to?
the car is a 95 talon tsi awd, pretty much stock except it has an act 2600 clutch. i bought the car and it would grind in first randomly sometimes and if you pumped the clutch it would eventually go in. car sat for a while then went to tune it and the slave went out so i put on a new one. i...
sounds alot like my car. i replaced my thermostat and i feel its fixed but i havent driven the car long enough to tell if its fixed completly since i have a idle problem. but i also dont think my fans turn on either and and have no idea why.
put in a new isc but it didnt solve the problem. i think the tps is bad or the throttle body seals are bad. no boost leaks. other then the idle the car runs great but i cant tune my safc until i fix the idle. please help this is driving me nuts
yea ill re check the fuses. they seemes good tho. my passanger window wont roll up now. i just tries it and it doesnt work so there must be a bad relay or something like thati just checked all fuses and they are good. i took out my radio and checked the plug from the car to the radio and it to...
i have a 95 tsi awd and for some reason i cant get the window on the drivers side to go down or the locks to work. i checked all the fuses and they are good. i also checked the wires with a test light and wasnt getting anything. bad wires maybe? im really at a loss for what to do and i cant find...
yea i tested the isc and it was all good except that prong 2-3 i had no reading. so i would assume its junk but i will pull it off to clean it. what should i use to clean it?
ok the car is a 95 tsi awd. it has greddy fmic, recirculated greddy bov, apexi safc 2, mbc, and a stock t25 and everything else is stock.the problem is that right now when ever you start it it idles at about 2k rpm or 3k rpm and doesnt go down. ive searched and couldnt find anything close to...
ok. what about bump starting it? bad idea? the car was at 20 psi daily before it shut off is what the owner told methanks that narrows it down for me. im going to check it out friday so ill see how it it
yea ik what you mean. dropping a motor in isnt really a big deal if i can get one. i have the space and tools. rebuilding is another thing. ive never rebuilt a motor before. i hope it isnt blown because the car is pretty clean. heres the link if anyone wants to see it 1997 Eagle Talon TSI
do i have to take off the wheel and splash guard to get at the pully? and do i have to take the pully off? i would assume so if its like my 420a. anybody have a rough estimate on what rebuild would cost from a shop?could it maybe have been a fuel pump going out on it? the car would either need...
yea i know a little about these cars but this is just strange. i think it could be maybe a bad starter or battery or something. the picture he sent of the engine bay still shows the timing belt clearly attached. if they are recent anyway. but yea all it does is click when he trys to start it.
ok so ive searched this a few times and couldnt find anything that seemed to resemble the problem. I found a 97 tsi awd that doesnt run for sale. it has a evo 3 16g ,HKS blow off valve,intercooler,exhaust, manual boost controler. the kid that has it for sale says the car just shut off while...
A nice header that can add maybe a few more horses. A stainless heatshield for the stock exhaust manifold. 57mm throttle body. A decently priced clutch and flywheel kit
I bought my rims in silver and now im having second thoughts and wanna see them black
so if any body could photoshop them black that would be great ### i dont have it at all.
I just picked up some wheels with that are 17x7.5 with a 45mm offset. i was wondering if these will fit a 2g thats lowerd about 1.5" and the tires i already have that are going on are 215/50/17. Am i going to need spacers or is this gonna fit decent?