My buddy is selling a rebuilt 6bolt motor from his 92 1g with about 32k miles on it, arp bolts threwout,cometic headgasket,new gaskets threwout but is unsure how much to sell it for what do u guys think its worth? how much these 6bolts go for?
I have a Built Auto Trans with Shift Kit, IPT 4000rpm Stall Torque Converter,Dual flexplates,4Bolt LSD rearend,Trans Cooler with 4k miles on it that i want to sell but dont not sure how much can i get for it what do you guys think?
$350 with shipping
End-to-end = 31" x 11.5" x 3"
Core = 24" x 11.5" x 3"
Inlet (ID / OD) = 2" / 2.5" http://cgi.ebay.com/90-94-Eclipse-Talon-Laser-Intercooler-Piping-Kit-DSM-1G-/300551044365?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3ATalon&hash=item45fa3cfd0d
$215 with shipping
SIZE...
My buddy is trying to figure out a good price to sell his turbo. He is selling a mitsubishi big 16g turbo its ported and clipped with oil feed line its the real deal for $325 is that too much or a good price? It has zero in and out play but side to side play but im sure it will be fine once u...
Yesterday everything was fine i was driving the car and then it started acting up i looked at my wideband when this was happening and it went super lean and the gauge read no numbers and the coolant resovoir light came on the one that looks like a little house and the car died out on me. it...
I noticed the fan in the engine bay turns on every 2min or less when the car is fully warmed up and being driven is this normal i was thinkin its too much? I see dsmers with a switch to turn on there fans do they do that so it saves power?
Sometimes when i go start my car up it will crank over n over n over but wont turn on then i will stop for a few seconds and try again and it takes a couple cranks and turns on but takes a few seconds to get the idle where it should be this only seems to happen when the temps outside are 50f and...
I hear people saying u can use it and some people saying no switch to 10w when temps go over 60f? Im running shell rotella t6 synthetic 5w-40 now and were hitting 64f the highest since spring is right around the corner so im thinkin i need to get this oil outta there but i only put 800miles on...
I replaced them 2000 miles ago should i change them again sooner then the recommended 15k mark? My car has moderate mods so i was thinkin i need to replace them before 15k? Also what are the torque specs when tightening the plugs?
I was thinkin to delete my muffler and put a straight pipe instead how would performance be i know it would be loud but would it make a difference at all? I heard i will be able to hear the turbo threw the exhaust without a muffler and its better for turbo car? i have a 3" dp no cat with 3"...
My oil catch can use to run from the side of the valve cover to the oil catch can and then back to the intake pipe but i saw this pic and figured i can run it this way also?Pcv valve hose to oil catch can back to the side of the valve cover and cap off the intake pipe where it connects to...
Its wierd ever since this warmup weather rolled threw like 40s n 50s my air fuel ratios at wot are 10.1-10.2? when it was 20f and below its 10.7-11.1 around there is it the weather u think? I dont have a boost leak and i have all new couplers and there really tight on! Im gonna do a wot pull...
What size are the vacuum lines usually on a mbc 1/8" or 5/32"? im using 1/8" and i think its too tight and very hard to push it over on the mbc without force so should i go higer like 5/32" i just want it to be snug also? if u go really snug wouldnt it be harder for the pressure to run threw it?
I heard people saying to run thicker oil if you removed your balance shafts and also people on evo forums were talking about this is this true or only if the motor is built?
I just installed a new alternator and belt about 1 month ago and i noticed on cold startup the lower part of the belt looks like its vibrating/flapping but once the car is warmed up it stops and runs smoothly what can it be? The belt seems to be on there pretty tight though. Also is it normal...
I replaced the valve cover gasket with the felpro kit 2 months ago and i noticed oil around the half moon seal or gasket is there anyway to stop the leak?
I heard too much good about shell rotella t6 synthetic so im gonna give it a try i went to walmart and got about 5quarts of it for $27 tax included! Im switching my oil from mobil 1 syn 10w-30 to Shell Rotella T6 Synthetic 5w-40 for winter time heard this oil is awesome and i read alot about how...
I have a auto 1g with a big 16g turbo and i wanna put some cams in it but dont know what would be best? My buddies were saying kelford 264/260 or gsc? I want something to really help my car out since its auto and i know thats what is slowing my setup down now is having stock cams. But i wanna...
Do they eliminate wheelhop? Cause more vibrations? Possibly put more power to the wheels? I see almost everyone with prothane then stock motor mounts these days so they must do something special for our cars lol
I have pte 680cc Injectors,Rewired walbro 190,93 octane,big 16g turbo clipped and ported,ported o2 ported 2g mani,stock cams,arp bolts threwout,3" intake,2g mafs,3" dp 3" exhaust!I was wondering if its enough for 22-24psi? If i wanted to push more then 24psi would i need a bigger pump and...
My motor is a rebuilt 6bolt with around 32k miles on it..Do u think mobil 1 syn 10w-30 should be fine yr round i was thinkin to go thicker in summer time I wanted to bump it up to 15w-50 mobil 1 syn in summer time at least since i do get on it.Im running a big 16g with moderate mods for now...
I noticed alot of dsmers remove there front splash shields the ones behind the fenders what are the good and bads about doin that? I heard to keep the engine bay cooler also the alternator? I was thinking if u remove the splash shield on the drivers side behind the fender your pulley,belt, and a...
My auto awd 1g vibrates alot inside like the dash and mirrors at low speeds and low rpms but it goes away when i get on it i looked at my mounts and the one behind the ps fluid is bad the others look fine and the rear one is filled but there all stock. Also the rearend of the motor is sitting a...
The rear defroster button wont light up and when i push it in it wont click what can it be? where is the fuse for the rear defroster maybe its blown? is it number 3 10a?
I have a 1992 eagle talon and i havent been driving my car in the rain cause im missing the splash guard that blocks the pulley and belt right behind the drivers side wheel and worried water gonna splash onto the belt and the alternator cause u can see the bottom of the alternator to what do u...
I have a 92 eagle talon and im wondering where is the windshield fluid pump located because only my rear is shooting water out but not the front does that mean i need a new pump or it can be its not hooked up?
My vacuum is 16-18 when i put it in drive in the daytime and when its in park its 20...now at night with the lights on it will be 16 in drive and still 20 in park is this normal for automatic?as for my idle its wierd like today it was in the single digits and negative temps and when i cold...
My car has been sitting for 10days out in the cold without being started but it has more then a half tank in it 93 octane will it be ok or should i throw a bottle of heet or stp in the tank to make sure all the moisture comes out? Do those fuel additives really work i mean which ones are the...
My alternator died in my 92 eagle talon a few days ago and alot of people are telling me to upgrade to the galant vr4 one because its 90amps and for the 1g auto its 75amp....But i heard i need to upgrade the 75amp fuse to a 90 is that all i have to do or is it gonna be harder to install it? Does...
So my car was running 10.0 at wot with a boost leak from a intercooler coupler and my buddy took some of the silicone off the maf sensor screw and turned it just a lil bit and also said that my 2g maf coupler going to the intake pipe was pushed to close to it so he pulled it back till the...
Im wondering if that screw underneath the maf sensor should ever be touched the one with the silicone over it? i heard u can lean out your car if u adjust it a lil is this true? My buddy broke the silicone off and turned the screw a lil is that bad? Should i put it back the way it was? i dont...
Picture 1=I noticed this wire keeps comming off and i have to keep putting it back on i dont know what its for and it dont seem to change anyway the car behaves does it need to be plugged in and what is it?Picture 2=The arrow pointing at the that bolt or screw is leaking but my power...
Ok so my 1g door lable says 32psi front and 29psi rear but thats on stock wheels which are 16" i believe...Well i have 17" wheels now and the tire size is 225/45-17 so should i put 32psi in all four tires?I dont want bad gas mileage or my rims to bend either also want the pressure to be...
When i start my car up the idle is fine but after 2min i notice the idle going up and down slowly not jumpy? can that be idle surge and how can i fix it?
Can i reuse my exhaust manifold gasket its a 4 layer and it dont have any cracks just a few dark spots? if i can reuse it should i spray it down with copper spray before reinstalling it? also the same with the turbo housing gasket it has no cracks can i reuse that to its the multi-layer one...
So one of my exhaust manifold studs in the middle of the bottom row came out and all this oil started comming out of the hole what can it be? i looked at the stud it was stripped as hell! is there a way i can seal the hole up or something?
I heard spray soapy water but i dont think water is a good idea might get inside and mess things up? how about wd-40 or carb cleaner i mean whats best to spray around the injectors and vacuum lines where it wont cause issues?
This coupler is pissing me off its 2.5" pipe is 2.5" clamp 2.5" ok so when i start to tighten up more and more on the coupler i notice the end of the coupler flexs out like in the pictures but as i start to loosin it it closes up?but i tried my hardest to pull the pipe off and no way its...
I just installed exhaust manifold gasket and turbo gasket. after that i went to drive the car and at when i boost past 10psi my car makes this noise kinda sounds like a horn like pressue escaping somewhere? i am missing one exhaust manifold stud and another stud is loose also missing 2 turbo...
What is the best way to tell if the exhaust manifold gasket is leaking? my turbo to manifold is missing one bolt out of the 4 so is that a leak?is it ok to install my aem wideband even though i have a exhaust leak? i know it will read incorrect but i wanna at least install it...will the leak...
Just wondering what size washers i need for turbo inlet gasket and for the 2g exhaust manifold gasket? 14mm? copper crush washers or turbo lock washer which ones are better?these dont say a size but will they work for the manifold and turbo inlet gaskets? Street Tuned Motorsports.com -...
I noticed ever since its been in the 90s out here my idle isnt as high as it use to be on cold days is this normal? when its cold out my idle will be higher then when its hot is the way i see it. can it be the mafs going bad? i did clean it real good with crc mafs sensor cleaner so i...
I have a 92 eagle talon awd just wondering if 32psi in all 4 tires is good or should i put more air in? i only street drive the car no track stuff but of course we all like to get on it on the streets to.
I was thinkin to buy the punishment racing o2 housing with dumptube just wanted to know if anybody is using it and does it help with boost creep? better then recirculated? better spool up? will the dumptube be long enough so it dont melt anything and stay out the engine bay or i would have to...