I can't find the connector or wire that goes to my engine coolant temp sensor.
I looked at the wiring diagram in the back of my manual, but it's confusing
Can someone get me some pics of where the connector and wire comes from?and i have two connectors that i'm not sure where they go, but...
I put in higher compression pistons, 9:1
rebuilt my turbo
may have a slight leak at the oil pan.
I'm going to replace the thermostat today and see if that helps,
but would having the 9:1 pistons produce more heat?
I'm about 220 F at the thermostat housing after 10-15 min of driving
And...
Put in my new IAC today and it fixed alot of my problems, but one it didn't fix..I can do pulls pretty well, kinda feels like my turbo doesn't kick in all the way but i can hear it spooling with my windows down, pulls great up until around 5k then jerks violently and i let off the...
Working on tinting my front lights on my 1g right now, and i keep getting these stupid little indents where the paint separates from and doesnt cover, I'm using VHT and I'm wondering what im doing wrong.. so far ive just been adding coats and wet sanding, and i'm trying really hard to keep it...
Where can i buy an isc from? found a few options but i'm wondering where
other people get theirs from..Mine was making a funny clicking noise with the ignition on, so i pulled it off and tested it and in the middle of taking a video to put on here it completely stopped working..
I live in rathdrum, Idaho.. which is close to Coeur d'Alene, Id.I'm curious as to if there is anyone in my area that is very experienced with engine building that could possibly take a look at my car for me.So far i've done everything on the car myself, but i think i may have gotten a...
I live in rathdrum, Idaho.. which is close to Coeur d'Alene, Id.I'm curious as to if there is anyone in my area that is very experienced with engine building that could possibly take a look at my car for me.So far i've done everything on the car myself, but i think i may have gotten a...
Kinda curious from experienced motor builders here..What are the general steps taken, and processes that need to be done to get a good "tune" out of a freshly rebuilt motor?Just thought this may be a good topic..thanks.
Just got a used hallman evolution, but it doesn't have the machined adjustment knob, instead it has this POS plastic thing that doesnt even lock on the end of the cable, controller and cable look legit, but the guy says thats how it came when he bought it. WTF did the hallman evolution kit used...
Bled correctly, and my clutch pedal will only move half way up after i push it down, i can pull it to even with the brake pedal but it wont return on its own. Thought about shimming the pivot ball but the clutch would still only return half way up.. the adjustment rod is out almost as far as it...
Ok.. so i got the talon started last night, but the cooling fans don't seem to be kicking on, i measured the temp of the coolant with a temp gun and it was at around 190-200 at the thermostat, a few degrees cooler at the top of the radiator, and the driver side of the radiator was only at 40...
These are my last electrical connetions.I think the one to the air filter is just a ground. but i dont know where the loop and connector off of the harness that goes to the starter goes...
These two wires were together in a connector clip. I need to know which of these wires goes to which male end.These pictures start from a zoom out view, and zoom in on the wires, and male ends.The first three show the orange and green wires. and the second set show the connector...
Ok.. so i got my motor all put together, I'm putting it in right now, well technically it is in. I have 3 of the four mounts secured. The Left, right and rear mounts line up perfect, but now my front mount is offset 0.25-0.5"!! The engine needs to come forward the height is great.I don't...
There is no part number, and i have no idea where it goes, i've been working on a very long rebuild and just forgot where it goes. Help with this would be appreciated. Thank you.:thumb:The car is a 1990 ealgle talon tsi awd.
2.0L DOHC
5 speed
Hey, So i got the rebuild kit for the td05 for $55, but i just noticed one of the blades on my exhaust turbine has a small piece of the corner chipped off.. :ohdamn:Options? :pray:this thing keeps getting more and more expensive..It looks great though.. i just got the timing done :D
hey everyone, just looking for some help, im looking for lime green vacuum hoses and cant seem to find any.. though i have seen pictures from places that sell hose, but they dont have any available.. unless i have to special order or somthing.. can anyone help me out?
My main bolts got mixed up at the machine shop and i forgot where there went over the course of a month.Where does the oddball main bolt go?Block is upsidedown on an engine stand.<-Transmission1 2 3 4 5
O...