hey there guys im looking for a 95 talon esi or tsi or a a dsm with or without engine, fwd or awd will work let me know what ya got i have a 4x4 truck to trade if interested, u can txt me at 607-329-9932.. i miss my old dsm and despretley want another.:hellyeah:

make sure your vaccuum hose's are in good condition and that your gaskets are good really nothing more to switch

as of right now it looks like rain even if its showers it will suck so if you guys wanna re-scheduel we can any one have ideas?

it will be jamesville park outside layfette but if theres rain or dont look good we wont have it due to guys traveling a long distance so if thats the case and you guys wanna do this well reschedule. but as for now well wait and see ill keep this post updated thanks

spotted white 2g tsi awd with carbon hood at dicks sporting goods in horseheads

is there a cost and can we register before the event?

well no one has gotten in touch with me about foods so very doubt full that we will have food but then it will only cost $5 wich goes to the park but im sure theres a fast food resturant some where close we can roll on too well hopefully everyone still plans to come i know for a handfull of us...

well as the days wind down to the meet im asking some of you to provide a dish to pass and your own drinks pm me if your able to provide a dish to pass.. still hope to see everyone there

there is actually a few guys driving a 2+ hour ride to laffyette for the meet, at least for you guys from albany you have a good highway to travel.. ill have to look at my list i might have a guy or two comming from albany:thumb:

nope always been july i still have the original pm i sent you about it so it there was a confusion sorry so it got moved from july 19th to the following sunday same place same time pm if anyone has questions thanks josh

also guys if you have anything you wanna sell/trade bring it along im sure someone is looking for what you may have.

well for you that dont know we have the jamesville meet wich should be covinent for most and should have around 20 cars hopiing more but well see as tme gets closer and i wont make it to horseheads this week gonna go racing

were gonna be close if not more than 20 cars thngs are looking good. thanks josh

SpOtTeD!....... Red eclipse/talon sitting on corner of bridge st and Pultney @ 1:30-2:00 Corning New york

nope o2 sensor timing is on the money

reminder just an update on why we changed the date and when it is...we have bout 15 cars attending hopefully more if you wanna attend pm me

well i got the car running and drove it yesterday but it bucks and hesitates when i get in the throttle i got to go over it today and make sure i didnt miss anything

i like your idea you could also find some wheels and hand as well as a dsm door cut t up so you only have the outer shell and its lights and put some graphics on it don't forget the neon lights behind some of your decor that will really make it stand out.. good luck and post some pics

well we were planning this meet originally for july 19th 2009 but seems the park has already had a big event planned so were gonna move it to the following weekend wich is july 26 2009 at noon event cost will be $5 that goes to the park and $5 for food, if you have any questions contact me and...

now correct me if im wrong when you port a head do you port too your intake and exhaust gasket?

what about polishing are you gonna get into that? is it recomended if you do one do the other?

wheres the online 2g manual?

does anyone know what the numbers are for an automatic and manual?

well guys i need some help i just bought another head complete with cams, im sure they are stock cams but im also sure there diffrent grinds/duration. the numbers off my old cams have a 26, 2244 and 674 on the intake cam and on the exhauset it says 37, 2214 and 676. not sure what they mean but...

ok well thanks alot guys new bolts it is...was also wondering about the heat barrier gasket for the intake i only fount these for 1gs and 2gs with the 4g63 will that work on a 420a?

i pulled my head off my 420a with 150xxx miles on it, puttin new head on due to bending valves, so my question is "are my head bolts ok or do i need new ones? what your opinions thanks

would lke to see smoked tail lights for the 95 talon as wells as a thumb nail carbon spoiler without the rear wiper cut out in it.

so heres my conclusion its very possible if a guy can put a 2g bumper fenders core support and hood on an avenger it should be vice-a-verca......

will i lke the viper conversions for the avenger thats the reasoning for asking i dont like too many aftermarket bumpers but i liked that one and i dont really like my stock one it lacks lookability

well you can look at it in two ways! 1. reason for cf hood with pins 2.after market fenders What kind of truck was it?

ill come play with ya before the summers up thats for sure always been around dirt tracks always wanted to play on a strip:thumb:

just wondering how much diffrent the evenger front bumpers are to the talons they look the same..... anyone tried this? thanks in advanced

colt yoyu let a damed ol chevy beat you looks like were gonna have to up the ponys under the hood of the lil colt..ROFL ill have to take up the talon and the maxima lol if you cant do it in one try the other....:hellyeah: in other news guys the meets is still on for july at jamestown park let me...

well if i was gonna go to a stage 2 cam i will upgrade my springs well for the fact like most dsm owners can keep thier foot out the throttle:ohdamn: and i dont wanna float the valves wich type of spring should i go with and where to get them? thanks so far for the help guys

can i ask without being rude what kind of discount are we talking here? i was also serching and found a dsk cam i belive it was whats the scoop on these they seem real afforedable

i think we should find a few spots where as one guy who has to drive 20 mins to the meet where as a few others might drive a couple hours so you know where im gong with this....

i was also wondering the same thing anyone tried the obx cams?obx Stage 1 Intake Camshaft - 242 duration, .354 lift with factory rockers Stage 1 Exhaust Camshaft - 242 duration, .354 life with factory rockers

yeah i was on brian crower web site and didnt find any info for the 420a cams, wheres a good place to buy these cams? or i should say whos got the deals :thumb:

im with you on that one man maybe we should start a ny dsm club what ya guys think?

whats the grind on the stage 2's and whats the part #... do i need to upgrade springs and lifters?

is there a grind number for those cams? or a product umnber for it? thanks

hey guys i've done some searching couldnt find the right answers.. so i have a 2g 420a n/a gonna do the valves due to bending a few when timming belt took a crap... so i wanna go with a diffrent cam set up and was wondering what cams to go with and wheres the best deal? im not planning on going...

i know this post is old but wondering the same thing any good for booseted or na motors? thanks guys

ok thanks guys and chance of piston damage?

no didnt pull valve cover.. the only thing i know is the ntake cam rolls over easy you dont feel the lobes at all and when i roll the exhaust cam over it wants to rip the wrench out of my hand

hey guys well from my last few post on my timming belt braking i finally got a chance to work on my car for those of you that dont know whats going on i had my timminf belt break while drivng down the road about 55mph.. well with that said i rolled my cams over and i can feel the lobes on the...

hey guys well went to get car fixed and when i broke the timming belt well i bent some valves well now i need a head for my 420a engine in order to ht any meets this summer if anyone has a head for sale please let me know i want my car back:cry:

the start up point of this thread is old but its active.. july 19th dsm meet @ jamesville county park in lafayette ny just south of syracuse. the cost about $10 for car to cover the pavilion and food let me know if you want to attend or any dsm in your area let them know see if they would like...

as my ol' man would say stones throw lol its not far from you at all... pm me let me know if interested.. thanks and well keep the thread alive:thumb:

in 4 days we have 10 cars on our list of dsm's and so far everyone on the list is willing to give a hand to make it happen so thanks to them once we have 20 cars on the list i'll get the pavilion lets make it happen REMEMBER TO PM IF YOU ARE ATTENDING THE EVENT HOW MANY PEOPLE PER DSM AND HOW...