Making your own USB data logging cable is just as easy, if not easier than making the standard serial cable. It is also more cost effective since the DB-9 serial version would require a USB to RS232 adapter, unless you have a laptop with a serial port. I selected this particular cable because it...
I recently overhauled a spare driveshaft w/new yoke,u-joints and carrier bearings. I figured i might as well get the spacers and hardware too. The service manual says to notate the number of spacers, but who knows if it is correct from the previous owner. Does anyone know the proper method to...
Want to run your AEM powered DSM in speed density mode but don't want to hack your wiring harness to death, here's what I did.Parts required:1 MAF-T male connector
1 MAP sensor of choice
1 AIT sensor of choice
Extra ECU pin connectors
Extra wire and loom
1 ignition timing terminal connector...
I'm getting ready to install my EMS, but i'm not sure if i want to run a maf or map/iat.
Living in Michigan,the weather sucks!
Which load setup will offer the most flexibility for drastic changes in weather?
Or will I constantly have to tune to adjust to the weather?
I am currently using a scanmaster to datalog w/Palm OS emulator running MMcD 1.8d.
Do i need to unglug it to set the base timing and ground the ignition timing terminal?
Or can i leave it plugged in and set the base timing on the MMcd Preferences page?
Has anyone out there found a palm emulation that will work with the Scanmaster,I tried the paltm os-dsmap one. I found the link on this site, but when i try to drop and drag the scanmaster icons to the emulation my pc tells me they are not compatible. Any suggestions...
Do I need to hook the fuel pressure solenoid back to the vacuum port on the reulator like the stock one,or do i eliminate the fuel pressure solenoid and hook the vacuum port tho the intake?