Hey Guys,
it's been a while I don't post here, I've been very busy with work and school.Anyways, what happened to the Classifields section? I am selling a lot of goodies from my 1G (Translator, Injectors, FMIC etc) and I wanted to post some stuff here. Please let me know.Thanks,Walter
Very accurate post, however I'd like to warn less-experienced members to be very careful with HijackThis. If you don't know what you are unchecking you could make your browser useless... so pay close attention to what you remove with it.Walter
...bastard!j/kHey man, that looks like an RC51, am I right?Is it you racing it? I just cot my CCS RoadRace Competition License this past February, I finally realized that once you hit the track you no longer enjoy messing around on the streets anymore... :)Walter
Hey Buddy,
I just saw this thread and I slowly scrolled down hoping not to read the worst.
I am truly happy your Dad is getting better and I will be praying for a full and quick recovery. :)Walter
Not to be taken as personal attack for ohio98eclipse, but...I am sick and tired of hearing about people saying 'the wife won't let me get this' or 'my girlfriend won't let me ride that...'. I think this happens only in the USA by the way. I love this country and I live in it as a grateful...
...want a mean sounding bike? Get a Ducati... ;)Anyways, if you want to apply the DSM-philosophy that made many of us members of the 'Home Depot Motorsports Team', here's a link that shows how to 'recore' stock mufflers the right way, so your bike sounds and performs better and at the same...
What's up Brendon...! Well since I have been life-banned from the other Forum for quite some time now :thumbdown, and since I like the athmosphere over here @ Tuners, I decided to become a bit more active. :thumb:I just finished translating it real quick... no need to waste my time at the...
There you go guys, just because it's you...E' il caso di dirlo, sembra uno scherzo, ma è tutto vero: la polizia di Stato, la Stradale per la precisione, avrà una Lamborghini Gallardo. Blu, con i lampeggiatori, strisce sulle fiancate e tutto il resto. Proprio come se fosse una banale Alfa...
Hello Naybar.You know that one of the fans is the "AC" fan, right?
It's not supposed to be on at all times, although many DSMers like me wire them so that they both run together.As far as your idling problem is concerned, although it seem to happen after 5-10 minutes of driving which...
Hey Guys, I have the SAME EXACT problem!
On my 1G, I have to top the master cylinder off with brake fluid every 2-3 days because it looses all the fluid and the brake pedal goes on the floor. I've had this problem for a while, I changed my brake system last month (SS lines, 2-piston calipers...
Hey guys,
I got the B2K Datalogger Cable but I forgot where to connect its three wires within the diagnostics port on my '91 Talon TSi AWD.If you have that logger cable or anything similar, could you please enlighten me on the right way to mate the three wires with the corresponding...
Boosted95, thanks for trying man, but not like that.
I am looking for something that can be printed out on decal material, just like if I were to make a sticker out of it.
Something simple, few lines together that make a Turbo, I've seen plenty online as symbols/logos,
but not now that I need...
Hey Guys,
I had a very original idea and in order to complete it and share it with you I need to look at pictures/sketches/drawings of Turbos. It has to be simple, not too elaborate, although it is not to make a decal out of it, to make it clearer it should be a few lines drawn to a draft which...
Thanks, but my rig would never forgive me for installing AOL on him.
What does BYOA $14.95 mean?I've heard about Trillian before, I guess I am gonna have to check it out.
Any detail on the AOL chatroom access?Thanks,Walter
Fellow DSMers,
I got a simple question for you cyber-pimps.
I don't use AOHell because I hate it, I connect through another ISP.
Last night I was at my Buddy's house and he met like 3 chicks and got their pics in a few minutes. I therefore admit that AOHell has nice chatrooms (devided in...
Fellow DSMTuners Members,
doesn't the picture below look familiar to you? 1G DSMs (1990-1994) are the vehicles that suffer the most from this problem, but the same technique applies for 2G DSMs and for any other car I believe. If you are reading this, I assume you have a minimum mechanical...
Hey guys,
I just got my 2-piston calipers from Mitsubishigraveyard.
I am getting my new PowerSlot rotors on Monday.All I need now is the SS brake lines and the new pads.I have two questions about pads:
1- Which pads do you recommend for my new brake setup I described above?
2- I was...
Dude, I don't know if it's allowed because I've had the same Sig for months and I haven't checked the Sig rules in a while, however allow me to tell you that your current Signature looks awesome, great work. Did you make it?Walter
Allright! I just ordered a set of PowerSlot slotted rotors from HorsePowerFreaks, which are running a SALE on them. Got them for $80 each, + $25 shipping for a total of $185 shipped as opposed to RRE's $180 + SHIPPING. I love RRE but I was glad HPF had this sale, because every dollar counts for...
Guys, thank you all for the contributions.gigahz95: I don't remember because I ordered multiple items from Gary, but I think it was in the neighborhood between $125-$130.NOSLO2PT0: Thanks for confirming my thoughts. As far as pads are concerned, I usually 'baby' my brakes and use them...
Shocks: KYB GR2 are stock replacements, probably ok for a N/T but if you had a GS-T or GSX I'd have recommended AGX, which is what I have on my Talon.As far as Discs are concerned, I heard that cross-drilled rotors are unreliable and warp easily. Go for Slotted rotors, RRE sells PowerSlot...
Gentlemen,
as the title states, I just bought a set of 2-piston calipers from Gary ([email protected]) @ MitsubishiGraveYard.
He's got a few sets in, I think any pre-'92 DSM AWD or all-years FWD owner should get a set before they sell out!!!Now, I would like to buy PowerSlot rotors to go...
Hello Wobble.
I tried visiting the iritors.com website you posted but it's dead.Could you confirm the link please?Thanks, I am in the market for stock sized slotted rotors for my '91 TSi AWD.Walter
Guys,
check this Document out, they do make a point in it (it kinda hypnotized me lol):Document.Plus, the website looks nice and professional, if I had to do a swap I'd look into them.Walter
LaserCool, you just posted what I was looking for.
Could you kindly be a bit more specific especially on the first sentence I quoted? Pardon the ignorance, but what do you mean by 'clipped the connection between coils and terminals'?
Also, how did you check the coils once they were out...
CraigB, great info, thanks.
If I blocked the FIAV then I should have no reason to worry about leaks (<--- no need to change gasket), right? If that is correct, after ordering a rebuilt ISC and swapping it, everybody should also block the FIAV and close the water lines through the TB, which...
That actually makes sense!
See, if you remove the ISC and take it apart, you'll notice that you can twist the 'male' side and watch the outer part increase or decrease in lenght just like a digital camera's Zoom. Now, if the outer part is extended completely and the ISC is reinstalled on the...
Gentlemen,
I am starting this thread with the intention to gather as much information and advanced technical info to be able to rebuild our own ISC motors, since this is a widely common problem among 1G owners and I am fed up with my Talon revving by herself at people when sitting at a...
Did anybody ever purchase from http://www.frankscustomfiberglass.com/ ?How is the product, quality, fit?
How much was shipping?Last but not least, do you know anybody that makes a 1Ga CF or FGlass hood with a small vent above the ValveCover/ExManifold area so hot air can leave the...
I have a similar story:
while installing my boost-gauge I bent by mistake the plastic vacuum hose in multiple spots, and I felt that for accuracy reasons I should have used one unbent.So I called AutoMeter and asked her if they could SELL me a spare vacuum hose, and they asked me for my...
I agree with you boostedtalon, I always said Gixxers deserve respect for their capabilities. ;)I got something better for you... Video Clips...You need to use a program called WinRAR to decompress the file (just like you would use WinZip).Those are a few Videos of me practicing 1st...
I respect your opinions 'rdrkt'. You expressed them politely and you got a few points.Here's what I have to say:
"Sticking out in a crowd" as you put it is only a small satisfaction out of all the positive sides about owning a Duc. It is not the sole reason why Duc owners bought those kind...
People like you should not be able to reproduce.
Why do you call me a 'tool' just because you are jelous you can't afford and maintain an exotic bike like a Ducati? Do you actually own a bike - or better - have you ever ridden one?I've ridden several Sportsbikes, and I respect all brands...
Here's mine:I use to sell those spark plug covers, but I just sent an email to Ludachris asking to remove the banner form the Home Page because I realized it wasn't worth it for me to spend over 3 hours on a piece then sell it for $48 including shipping and material... :cry:But...
Guys,
what's the actual name of these miniature GAS-Powered RC cars?
I searched on eBay for TC3 and I did find little RC cars but they were electric.If I find gas powered ones I'd rather save and get one of those instead.Thanks,Walter
Guys,
at my job the people that work in the Inventory department are going crazy with these little suckers!!! I'd be walking by (I work IT, I am always everywhere) and I see a bunch of grown ups sitting on the floor drifting those little machines between pallets and such... :DOne of them...
Mac blows.
I hate most of its users even more, so proud of their stupid Computer choice that they have to put an Apple sticker on their cars just like g@y people do with Rainbow stickers... :barf:Are you one of those proud Mac users?Here's a cookie for you... and if your MAC is crashing...
BadBoy... it's only a few of them working with a lot of amazing and unique projects in mind. Give them some time, they'll eventually come out and kick some serious ass.Martin rocks, I might be getting a CF vented hood elsewhere because I can't wait too long, but you can bet I'll be waiting...