The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Kiggly Racing
Please Support STM Tuned

Search results for query: *

  1. bNasty

    Show me your before and after!

    mehhhh ill playbefore when I got her in 2010Now
  2. bNasty

    Wheel and tire fitment opinions

    Well since no one will give him a real answer I will. If you roll and pull the fenders in the front I think you can fit some +20 rota grids 18x9 but thats pushing it. Without doing crazy fender mods you can fit 18x9.5 with a +25 or +30 in my opinion if you get RPf1s in 17x9 +35 that will look...
  3. bNasty

    Took the DSM to the track with the Holset

    I was jammin to call me maybe all the way broooooo
  4. bNasty

    Took the DSM to the track with the Holset

    Its just an open shitty ebay manifold. Im seeing full boost by about 4500 I have the .82 T3 housing235/45/17 I think I dont remember and my car is at my parents house
  5. bNasty

    Took the DSM to the track with the Holset

    I was at about 25ish psi but when I get re-tunned I will obviously go for more. I want to go balls to the walls with my setup.
  6. bNasty

    Took the DSM to the track with the Holset

    I think I could have pulled an 8.1 had I been launching using the 2 step I was literally just off the brake nothing crazy.
  7. bNasty

    Took the DSM to the track with the Holset

    Well I know this isnt that cool but im really excited about it. Finally got the holset on and took the dsm to the local 1/8 drag strip near my house. For 15 bucks and as many runs as you want you cant beat it. My fastest time ended up being a 8.50 @90 with a really bad 2.1 60. This was all done...
  8. bNasty

    Leaking water pipe

    I forgot to mention that I already replaced both o-rings on another note will a 1g water pipe and thermostat housing bolt on to my 7 bolt head?
  9. bNasty

    Leaking water pipe

    So basically this water pipe has had me at my whits end. It leaks, right where the o-ring is where the water pipe mates with the thermostat housing. I have an hx40 and had to dent the pipe to make it fit. Its seems obvious that this is why its leaking. I just bought a new water pipe and even...
  10. bNasty

    Finally got my HX40 couple questions before install

    Right thats what I plan on doing. What are your thoughts on the fitting on the turbo itself?
  11. bNasty

    Finally got my HX40 couple questions before install

    Alright guys I have spent hours and hours reading through the holset threads and maybe I missed something but I have a couple questions. As I stated above I finally got my hx40 and i'm pretty excited to install it but since my last turbo (g60) failed due to improper oiling I want to get it...
  12. bNasty

    Tie Rods, Enkeis, Pep Boys Sucks, I wanna Scream

    I work at sears and people dont understand that if you have any play in your inner or outer tie rods we absolutely can not do the alignment. I cant control the fact that there is play in a customer's inner and outer tie rods.
  13. bNasty

    bNasty's Talon Build

    So its been an extremely long time since I updated this thread. Some of you may know that my talon has kind of been on the back burner since i've been working on my truck. Recently I have made some progress with the car. Basically over winter break the turbo took a shit and is not rebuildable. I...
  14. bNasty

    Its been a while but IM BACK

    So i havent posted an update for a while so here it is. I got those 37s on my truck and they look awesome but are def wayyy too stuffed in the truck. We'll see what they look like when I get my 6 inch lift on there. I was really productive this week I finally got my pistons in. I went with a...
  15. bNasty

    Its been a while but IM BACK

    BIG UPDATEfinally today after class I got the motor completely broken down. I decided that leaving it in the bed of my truck would be easier to clean up after I was done and boy I was right. There was a rediculous amount of sludge in this motor and it wend everywhere. It was a little hard to...
  16. bNasty

    Its been a while but IM BACK

    Hey everybody its been forever since I posted on here regularly. Some of you may remember my talon which is currently on the back burner right now (awaiting HOLSET :thumb:). But its been on the back burner because of this my truck. Some of you may know that I got this truck as a daily almost a...
  17. bNasty

    2gb pic request

  18. bNasty

    cars with body kits that look good!!

    What up fellow NOVA dsm'er im surprised I havent seen your car around
  19. bNasty

    bNasty's Talon Build

    So my friend took some shots of the talon today. I know its a dsm so nothing special but I thought some of the lighting was cool. The car is still chugging along, hopefully looking at getting a pte 6262 and FID manifold this summer.
  20. bNasty

    bNasty's Talon Build

    Alright guys I know I have posted in a while so I thought I would inform those who care about my life and the life of my talon. Im kind of in the stage of a mini build right now. Im switching to a t3 setup and installing a JMF drag and billet s90. I say mini build because my car has been down...
  21. bNasty

    bNasty's Talon Build

    Sorry i havent updated this in a while. I finally got back on spring break and buttoned some final things up. The car is now down at school with me. Finally got a front bumper but unfortunately i could not get the 2gb talon bumper. but i needed a bumper so i could take the car back to school...
  22. bNasty

    bNasty's Talon Build

    sorry i havent updated in a while. Ive been at school, i finally came back on break and buttoned up the drivetrain. I still need to finish putting the rest of the harness in and hopefully in the next couple days ill get her running. I know the stance is meh. I will probably take the coilovers...
  23. bNasty

    bNasty's Talon Build

    Alright guys its been a while since i updated this but last night i assembled the motor. I still need to do a couple more little things before i can put it in the car. Unfortunately that will probably have to wait for winter break :( but here are some pics enjoy4g63 porn about to happen
  24. bNasty

    bNasty's Talon Build

    Ok i havent updated this in a while but here are some more pics of the car and parts i have received. Hopefully ill be coming back on thanksgiving break from school and ill assemble the motor. I got the brembos mocked (i know im trendy with the paint) but the paint was faded on both the wing and...
  25. bNasty

    bNasty's Talon Build

    hey everyone I had a build blog before but I thought I would make an actual thread, because my build blog was really hard to follow. Hope you guys enjoy.All right so i thought i would post a few pics of my build. I currently own a GST and i was planning to build a motor and buy a shep trans...
  26. bNasty

    Could you help a fellow DSM'er out?

    Hey guys i need yalls help again im trying to get ride of the month on a local forum of mine. If you guys could spare a couple minutes, join the forum and vote for me (bNasty 96 Talon) I would be very appreciative.:thumb:VOTING: Ride of the Month - November
  27. bNasty

    Power Steering Hose question

    Alright sorry if this is kind of a newb question but here goes. So I have a power steering leak and its not coming from any of the high pressure lines from the pump but its coming from the line under the rack, that goes into the rack. Its a small line about a foot long that goes from the drivers...
  28. bNasty

    bNasty is BACK!!! with another picture thread

    thank youannddddd thank you
  29. bNasty

    A little update on the talon. and My truck

    So i guess to keep you guys updated with my life the talon is still running great. Hopefully looking at getting a pte 6262 and FID manifold this summer. Ive been busy with school and I finally bought a Daily!!!! 86 f150 with a 302 hopefully shell be my tow rig. Hopefully putting a 4"lift and 33s...
  30. bNasty

    bNasty is BACK!!! with another picture thread

    I would buttttt right now im down in school in Norfolk. When I come back I will
  31. bNasty

    bNasty is BACK!!! with another picture thread

    that was my eclipse Ive been building this car for about a year and a half. Its hard since im in college.No I didnt. In 2005 i was just getting out of 8th grade haha. But I do work at sears as a tech.
  32. bNasty

    bNasty is BACK!!! with another picture thread

    Just get some coiloverssssssss you can do it
  33. bNasty

    bNasty is BACK!!! with another picture thread

    So i guess to keep you guys updated with my life the talon is still running great. Hopefully looking at getting a pte 6262 and FID manifold this summer. Ive been busy with school and I finally bought a Daily!!!! 86 f150 with a 302 hopefully shell be my tow rig. Hopefully putting a 4"lift and 33s...
  34. bNasty

    bNasty Finally gets dyno'ed!!!!!!!!!!!!!!

    yea i drove it around for a good break in the night before. So basically all night haha
  35. bNasty

    bNasty Finally gets dyno'ed!!!!!!!!!!!!!!

    that would take sooooooo longgggggg haha
  36. bNasty

    bNasty Finally gets dyno'ed!!!!!!!!!!!!!!

    So I finally was able to get dyno tuned this week. My first trip on the dyno I made 390 and then my south bend clutch took a shit. Once I got that all sorted out I went back for a second sesh and made about 430 at 26 psi. Not too bad I was hoping for more. My turbo and exhaust manifold are the...
  37. bNasty

    My South Bend CLutch failure (Pics inside)

    I agree I feel like something is off but I dont know what I mean this isnt like my first install either. On my GST I installed the clutch and had no issues for over 20k miles. Im really puzzled all my alignment pins are in correctly and everything.I am one of your customers I sent you these...
  38. bNasty

    My South Bend CLutch failure (Pics inside)

    well my last clutch was a 4 puck unsprung and the splines stripped out of the hub in that clutch
  39. bNasty

    My South Bend CLutch failure (Pics inside)

    So if some of you have been following my build or friends with me on FB you will see that I was dynoed last week and you will have also seen that my SBC clutch took a dump. The hub basically broke and 1 spring popped out and 1 spring broke in half. This occurred after a 400+ hp dyno pull.My...
  40. bNasty

    Tinted windshiel

    I would do it im contemplating 50 on the front windshield, just because 20 would be wayyy too dark at night. I will be getting 5 all the way around.
  41. bNasty

    Here is my build log of my Galant VR4 #1062

    hey if it holds f*** it thats what I say. Keep at it your welds will get better
  42. bNasty

    Yet another Door Lock thread

    Ok so heres the problem. As title kind of eludes to. My power door locks do not work. I really dont know whats going on. Both the passenger and drivers side dont work at all. Theres not even the clicking noise. I checked the fuse and it was good but i replaced it anyway. Still nothing. Do you...
  43. bNasty

    Here is my build log of my Galant VR4 #1062

    I dont mean to be an asshole but your welds look like sh1t herelike wtf happened here... way too much filler?
  44. bNasty

    Lambo vertical Doors [Merged 8-7]

    Brian O'connor raaaaaaaaaatard
  45. bNasty

    Can you Help bNasty out? (Vote por favor)

    Alright guys I know I have posted in a while so I thought I would inform those who care about my life and the life of my talon. Im kind of in the stage of a mini build right now. Im switching to a t3 setup and installing a JMF drag and billet s90. I say mini build because my car has been down...
  46. bNasty

    Ever pick up girls with your car?

    its the plates for me
  47. bNasty

    Should I pull the Head

    Idk im kind of sketched out about doing that since like Its kind of a crucial part and I dont really trust myself to do that you know, ### if its cocked one way wrong then it wont torque right and i feel like it could mess up my cams.
  48. bNasty

    Should I pull the Head

    Ok so heres my problem. I was installing new cams and idk when but 2 cam cap bolts broke. I tried using an extractor and that didnt work and I heated it an use the extractor and that still didnt work. Is my only option to pull the head and take it to the machine shop. My intake manifold and...
  49. bNasty

    oil pressure problem

    the compression in my motor is fine i checked it the other day. all even and 160 across the board.
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top