Found this link recently and wanted to share to the restWww.Charm.liIts a file directory of service manualsScreen shot

Got a set of them recently, not a fan of the blank slot between the tail lights. I think to be technical im converting the edm lights to the jdm lightsIm not sure if anyone has done this before so I thought I would post the photosI got out my trusty heat gun and gently heated and pryed...

I searched and there are no threads about this, im assuming you all live in a place where you can find these cars being parted out next doorAnyways, shifting from first into second and darn near pulled the shifter into the cup holder, was hoping I just broke the shifterBut the cable at the...

So I have 2 gst's one is bone stock except for a catback, the other is pretty modifiedThere has always been what I consider to be shit box level noise from the rear area, I have even replaced the rear wheel bearings on my stock 2g with no improvement, I had just come to accept that it was...

Scrolling for used ones on ebay the other day and these new ones popped up. The stock 2g flimsy rubber button remote has always been terrible to press and respond to the button press, these look like they will be much better.Advertised to be stronger and have better range and fit 95-99...

This is the Build Thread for Sonic GS-T. Reply below.The story as I know it:A local car flipper told me about this car and that he was buying it for a great deal, it just had a couple if issues. I warned him not to buy it, or to only let me work on it. He did not take my adviceFrom the...

This may help a few of you in the future as these parts are getting scarce, or help wise men direct newbies to find partsThere are very few vendors still selling new engine sensors for our applications, however they can still be found easily and new.Vendors on ebay are selling them under...

Ive been studying up on some subtle differences in export model carsWe all know they required rear fog lights, with amber corner tail lights. However here is a picture of a rear fog light switchIf you'll also notice below the steering column is a level switch. For going up and down...

This sounds dumb, however I can not read the transmission dip stick in my eclipse.The one in there now has a white plastic handle, and it's connected to a string (like picture hanger wire) with a bobber on the end made out of plastic to measure the level.No matter what I do it's always...

So I was having an issue with the low oil light coming on during a hot idle in drive at a stop, I researched and found that I indeed had a small oil leak from the filter coming down to the sensors and probably interfering with the pressure sensor.Tightened the filter, cleaned the sensors...

Putting a 99 ecu in my 98, I realize there are some differences but I would really like a second opinion before I put everything back togetherThe 99 was clone of my car, gst leather auto with infinity sound. It had ground wires on the bolt to the ecu. It's the two black wires under the ecu...

Project car has 750cc injectors, 250 fuel pump, aeromotive for, 14b turbo, aem wideband boot legged into ecu (not sure on the wiring, previous owner used all red wires to connect everything. I want to make the car all stockIt's evo scan with tactrix cable. I know nothing about tuning, and...

chrysler kid submitted a new DSM Profile :1998 gst projectRead more about this vehicle here...Preface: I found the original owners thread on here. If you are considering upgrading your car, you have to consider yourself the best mechanic.Previous owner was screwed from the start, he...

So I re did the head on a gst with an eBay 16g turboI'm comparing my 96 gst to the 98 which has the improved block design and black box ecuMy questionThe cylinder head is getting hot much too quickly on the 98. It will boil out of the cap when I try to purge the system with the cap off...

I recently purchased a running and driving 2g gst with lots of modifications for $1300. The owner was selling for what he thought was jumped timing, but I found to be all of the upper intercooler piping blown off. Fixed and repaired for him to witness, it idles fine and drives fine but it's...

I went on ebay last week to buy it now on a like new greddy type S and it had already sold, so I started checking for edm jdm or all clear tails. Well I found a set of all clear and gobbled them up because they are very rare.The lights are basically in brand new condition but they kind of...

So on 2 separate dsm's I have broken door handles entirely due to the key fob range. To lock or unlock sometime I have to literally hold the key fob over the winshield to get the car to lock or unlock.The key fob is in like new condition with new batteries, tested with rf key testerSo do...

It's not mentioned on this site, but just to let you know that spring compressors are not needed for removing the spring from the strut on a 2g fwd.Step 1: lift car using good jack point on chassis. If you chuckle at this because there is no good jack point on a 2g then keep reading below...

Alright hopefully this will give me more motivation to finish this car.It's my dream car, my highschool car except nicerGrowing up in the early 2000's was a time where mustangs and Camaros were slow and generic, and I was able to find a clean 96gst from a kid named aj on the local dsm site...

Long story short autozone purchased IMC parts last year who is an OE import parts supplier primarily for European cars, or should I say autoparts manufactured in europe.I was at an event and spoke with an imc rep who had an oem mitsubishi timing belt with components including tensioner and...

Let me first say I did my timing belt with all oem components from extreme psi. They "forgot" to put my oem tensioner in the box. Called them and they sent itNow with rock auto, I ordered all Continetal accessory belts, and a Continetal timing belt and balance shaft belt for good measure...

I did my gates racing belt and balance shaft belt and re did my oil pan.I still had a severe oil leak after switching to synthetic 5w30.The oil leak would be severe after the car was running.Anyways it all turned out to be the cam seal, it was hard to spot but it would trickle down onto...

I was just doing the pump with my timing belt as regular maintenance and thought I'd show what the underside of the pump can look likePump showed no signs of failure and was still functioning. Think about metal shrapnel going through your cooling systemIn the picture you can see the fins or...

Alright, long story short I thought this piece of gasket was part of the old water pump gasket, I couldn't get it out so I used a razor and cut the exposed edge off.I have everything assembled again but I can not find any answer as to why this corner gasket is exposed. Does it serve a major...

Let us start from the beginning.In 2003-2004 I owned a white 1996 eclipse gst with cloth interior. I bought it with 65k miles for $6500. I don't recall being excited about the great deal, at that time used dsm's were still a dime a dozen and the 95-96 body style were the least loved. I...

I expected to have to fight this catback system but I was wrong. I pulled off the factory catback and found that on step 1 the catback failed out of the box.It appears their quality control completely skipped on drilling out the bolt holes to the catalytic converter. The cat back will not...

Long time user, I've managed to find the last ever stock 2ga (yes I specifically want only 2g a) and I can not find any vendors that make parts for these cars anymore.Are my only bolt on performance options limited to ebay!? I'm not paying $250 for an injen I want quality partsVendor...

i recently got back into a 96gst and it has 3 oil leaks. the first is from the turbo oil return line, the second is from the oil pump, and the third i can not figure out.The car starts smoking a little after it gets warm from oil leaking onto the down pipe. Ive cleaned that area up and i...

recently during my swap in of a 16g into my eclipse, i was removing the oil drain line and one of the bolts that connects the return to the oil pan is stripped (when i turn the screw left or right it does not come out or go in at all. well (im still kicking my self) but i wanted to see if i...

:shhh: the guy who lives across the street from my house won, he drives a yellow v6 supercharged mr2. sorry the dsm and the evo didnt winheres a complete photo journal of the events...

whaddya think? :talon:

:) had some fun with my friends over springbreak, enjoy

im checking to see if anyone would want to join a texasdsm website for the whole state.it would have several area forums for dfw, san antonio, austin, houston, el paso, amarillo and so oni think it would be great to have so we could have a site for all texans. we could arrange for a big...

:confused:

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

really? i am??? whoa cool i didnt even know. i am flattered to say the least

i cant be the only one to like the smileybumper on the 95 eclipse. I love the foglights in tha bumper, it makes the car look very aggressive. How can noone else like the smiley?

i noticed this in the gallery recently, i was wondering where he got it from and if it actually cools the engine or is just for lookshttp://www.dsmtuners.com/gallery/showgallery.php?cat=500&ppuser=4972:confused: