Im trying to install a new seal on my 98 talon and ran across a problem. For one Im not sure if the metal piece around the hole is part of the old seal and needs to come out. There is no way my new seal will go in with this metal piece in so we tried to take it out but had no luck now its all...
My 98 Esi has been smoking blue lately if I sit idling too long which leads me to believe either the rings or the valve seals are shot. Today while getting some oil for it I see "Bardahl No-Smoke" and quickly look at a couple reviews about it on my phone. Anyways, put less then instructed, maybe...
Text/call will get a faster response. I'm located in Chester, PA. I CAN ship, my paypal has been unlocked.
My cell # is 26725three86five5
Email [email protected]
Shoot me a price !Full ad...
Ever since I did this paint job on my bumper I have been wanting to do more things to make it resemble the newer mitsu front end style. I'm pretty poor at photoshop but gave it my best shot. What I did was give the headlights a eyelid with a sharp straight edge and blackened the white area...
Just trying to get a idea of what everyone thinks my problem could be. Ran a compression test and my numbers were
100-105-106-96Next up is to do it again and add oil to check and see if the rings are bad. After that a leakdown test. Basically I just want opinions on what those low...
I've always been a battlefield fan since BF2 came out for PC & BF:MC on the ps2. Since then I've been addicted and owned all of them up to Bad Company 2. Idk if anybody followed E3 but the game looks PHENOMENAL. The Tank mission game play is breathtaking (YouTube - ‪Battlefield 3: Thunder...
I just realized theres been no fuse in this location and I don't think I'd be able to even put one in since one of the tabs is broken off inside. I would just like to know what the fuse is for and what I can expect from not having it for all 3 years I've owned the car. I did try to search and...
I just purchased these rims and I originally was going to get them powder coated black but now I"m not sure. The first pic is how they are now on my car. The second pic is a ms paint mock up of them painted black. I need opinions !!!!Gold/bronzeDark grey w/polished lipBlack...
Okay so this problem randomly started tonight, it was running perfectly fine before. I pulled into a parking lot and went to shut my sunroof and the rpm's dipped to 700rpm then died. I thought it was weird but didn't think much of it. A couple hours later I started it and it ran fine for about 2...
It's kinda old so a few of you may have seen this. From what I've read it's a twin charged (Turbocharged AND Supercharged) Lotus Exige putting out about 500hp. This thing is pretty F'n mean, and the driving in on par considering the speeds he's at he manages to stay in his lane the whole time...
If anyone could photo shop a supra with a 2GB front end, I'm pretty curious to see it because I always see eclipses with the ugly supra conversion.Here's the best front shot I could find of one:
So after originally blowing the HG 9 months ago, the head was sent off and built. Every weekend since then it's been wrenching all for today. Got it started, obviously we knew there'd be oil leaks but there was one that was pissing pretty bad....and we think it's the HG :cry:. Anybody got any...
Does anything know the nuts size & pitch that holds a 1G Cam angle sensor in place on the head ? The same ones that allow you to loosen and adjust timing.
Taking off my head I got the surprise of seeing these. I'm assuming they are arp head studs by the arp print, just Hoping their not knock offs or anything but my question is this:
The head has probably not been touched in awhile, the lifters were ticking, the stem seals were bad and my hg blew...
First the car smoked bad when it started, got worse as I drove so I go to shut it down but it died before I can do it myself. Coolant filled my catch can and when I pulled the dipstick a big puff of air came out and it was very foamy. Today we pressure tested the water system, held 17psi for 10...
Well on the way home after about 10 mins of driving I notice my temps climbing to about the 200 range which caught my eye. About 5 minutes later their at 220 so I'm alarmed, I know somethings wrong for my temps to be this high in 15º weather even with my new front mount. Being Christmas eve and...
Trying to wrap up a the nightmare of my first timing belt job. Had the car running for 3 days then the belt jumped shutting the car down so it's been down since that happened. It jumped because we had too much slack. Now we have one small problem to get over and I can finally have my car back...
Trying to wrap up a the nightmare of my first timing belt job. Had the car running for 3 days then the belt jumped shutting the car down so it's been down since that happened. It jumped because we had too much slack. Now we have one small problem to get over and I can finally have my car back...
If anybody comes across a white 2g being parted out or anything I need just the driver side 2g fender (WHITE). I'd like stock over Z3 or any aftermarket ugly fenders also. I no longer need the headlight.
Problem seemed to have started after installing my new o2 sensor, but may not have been the cause. The problem is the worst when the temps are less then 190º, but even after fully warmed up still occurs slightly. It also seems to clear up under boost, so really only occurs under light throttle...
Finally got evoscan logging properly, (without my wideband hookedup). I really have no idea what to base my results off really and need opinions on the little info from this one 2nd gear pull. Why am I not logging knock ? My question is does anything seem off ? is timing being pulled ? anything...
My car is finally pretty stable and I've saved up enough for my next round of mods. Before I purchase one or the other I'd like to see everybody's choice of parts I'm looking atI recently made the mistake of buying a o2 dump thinking it would help my creep but I from what I've been reading...
Searched a little could not find any answers, only threads with no fixes.P1105 - FPS Fuel Pressure Solenoid Circuit Fault:
I have my FPS hooked up in stock form (IM nipple to FPS, FPS to FPR) just do not know why the code would pop up ?P0120 - Throttle/Pedal Position Sensor/Switch A...
Basic Question:
Is it possible to have lifter tick so loud that the knock sensor detects it as knock and pulls timing ?If you want more info on the problem read below:I had a problem with my car about 4 months ago where my car would stutter and make no power under WOT, it ended up being...
I recently had a alternator go bad on and me and replaced it. After replacing it I was driving home from work and the car slowly died, the lights dimmed, the car barely ran and it died a block from my house where it was pushed home. The alt is literally 1 day old brand new, the battery is new...
OK, now that I have the car running strong I'm looking to hook things up on the outside a little bit. The paint is horrible, the rims are nasty and I have holes in my trunk from having no spoiler. I have the money to buy whatever I want but I only want to do one thing right now and keep the rest...
I have been having so much trouble with this car so I finally went out and bought a nice OBD II Scanner. Relief came when the scanner arrived but it did not last long. I booted it up correct and as it tried to connected I get "Linking Error". The scanner cannot communicate with the plug. Is this...
This may be alot to read for some but I'm really lost.
Recently me and my dad went through and replaced all the motor mounts with prothanes, while we were at it we did quite a few changes and upgrades. Before we did all this the car ran fine had none of the current issues I'm about to talk...
I bought this kit:
eBay Motors: PROTHANE MOTOR MOUNT INSERTS ECLIPSE DSM 4G63 95-99 RED (item 200311721946 end time Feb-28-09 09:11:36 PST)It came with everything it says 3 engine 1 tranny. I'm pretty sure for the larger mounts I got what I need but for the 2 Smaller inserts RL and FL I'm...
Well since I bought the car last month found I have found so many unhooked wires, cables and things hooked up completly wrong. Two things I'm not sure of if they are hooked up right is my HKS SSQ bov and my Manual Boost controller. I'd appreciate if somebody could tell me if everything seems to...
Ok I recently purchased a new DP and it turns out it does not fit the stock o2 housing I have. I know I could probably do some work and make it fit but I think it should be upgraded seeing as the stock unit is insufficient. I have read every thread I could find about o2 dump/recirq and seem to...