So, I’m not sure how many of you have or had an AEM UEGO. I’ve had mine for years and in the Florida sun, it just deteriorated. However, my autometer phantom II gauge still looks pretty much new. So, for the last few years I have had no face on my gauge. Today I decided to change that. I trimmed...

I just got my car running again after a 2 year down time and I was going through my old parts box, when I noticed I had 3 O2 housings in there. Two of which I know are stock, but I was wondering if anyone knew anything about the third? The one in question is the top one in both pictures.

Anyone else notice the 1ga eclipse in the new Wu Tang show? Seems the DSM’s are definitely starting to get more popular recently with the article being posted, it being in “fastest cars” and now this.

do any of you know of somewhere I can buy a new harness for my talon? I have a 1990 harness. I want to replace the engine harness because I’ve had 2 rats now in my engine bay and I’m not even going to bother trying to preform repairs at this point I just want to replace it. I saw Reywire sells...

Anony know if the blower motor box for a 1gb is the same as the blower motor in the 1ga? I need a box and I found one but it says 1990-1994 on the add I'm looking at.

I am looking for the wiring diagram for the 1990, I have the electrical manual for it and have gone through it for about an hour and still can't find anything but the relay and how to check it and the A/C cooling fan. Does anyone have a wiring diagram with the colors and everything they can post...

I just bought some used 1g KYB AGX struts with Ebach Pro Springs on them about a week or so ago for $50. The front springs went on extremely smooth and only took me about 30 mins to do both. I got to the back and :ohdamn: . I took the stock struts off and realized the lower strut bushing sleeve...

Car was not running lean before today, I have DSMLink V3 but I got a code today on the way home for a bad O2 sensor. I know for sure the car is running lean because it feels horrible and my wide band is reading (---) then to normal when I tap the gas but before it started running like garbage it...

I just recently installed new valve stem seals and revised lifters on my head because I was getting a little bit of white smoke on start-up and lifter tick. Since I was pretty much taking everything apart anyways, I figured I might as well change the head gasket since it had an unknown head...

I took apart my head today to swap it out because I bought a new head gasket for my car and I took the valve cover off to find my cams are different on this car then my other heads cams... They have the letter G stamped on one side of the cam and the letter A stamped on the other side (Its like...

Does anyone know if the stock 1ga oil cooler lines will fit on an aftermarket oil cooler? Like the one from Extremepsi?

I was working on my car yesterday and I ended up over-tightening and snaping the stud that comes out of top of the powersteering pump and connects to the big powersteering line :ohdamn: . I managed to get all of the stud out of the pump but I have no idea where to get another one and most of...

The boot tore and the whole bolt, sleeve, and boot were all just spinning freely inside the lower lateral arm so I cut a large notch into the lower lateral arm so I could pull it off so that just the bolt and sleeve were there. I've been waiting to cut the bolt and sleeve off so that I could...

What size, and thread pitch/pattern is this nut? I need one of these because I returned the other rack and now I don't have them (bought 2 tie rod ends and they didn't come with the nut like I thought they were supposed to).

I have a 1991 Talon but it was manufactured in August 1990, the car has an external oil cooler, the TPS is from a 1990 and the Coil pack is from a 1990, the gauges are from a 1991 though and everything works EXCEPT for the Tach. My question is would the tach be the only thing that shouldn't work...

I know its a lot to read but this was the shortest way I could sum everything up so you guys know everything that's going on and how everything happened. Plus the read is worth it :PWell, I sold my old 2g to my girlfriend's brother because I ended up running over the oil cooler (It wasn't...

It holds the center part of the front bumper up off the ground, I was wondering what it is called and where I can get one or whats the best way to make one. Its the part that goes to the hood latch and to the front bumper. Mines gone :( .

The death list: Cars that aren't coming back for 2013 - Yahoo! AutosAccording to this article the 4g Eclipse and 10g? Galant are going to be the end of the line after this year. What do you guys think?What they write about it is pretty funny though haha.

I took my girlfriend's car up to the dealership last year and got her ball joint recall done. I got the car back home and noticed that they only did the passenger side of the car :ohdamn:. Well, about 5 months ago the drivers side ball joint started clunking so I called the dealership again to...

Can anyone see what I'm doing wrong here? I drew up a diagram on paint of how I have it wired up and its not working. The switch gets power but the fan doesn't kick on when I turn the switch on.I have the switch power wire going to the lighter positive and the fan positive going to the 87...

Where is the best place to wire the aftermarket Mishimoto fan to the ignitio?. I've searched this before and have come up with no real direct answer or how to on it. Also, I'll clear this up before I get the comments telling me to fix the underlying problem. I soldered the high and low positive...

I bought a new car a few days ago to upgrade from my old 2g FWD talon to a 1g AWD talon and I just noticed that the idiot cut off the entrance inlet to the fuel filter -_- I was wondering if you guys had any tricks to either get a new inlet re-welded on or somehow fixing my stock fuel line. If...

I have had a pretty bad oil leak for a while now (I have a 95 with a 6 bolt swap) spraying from the back of my motor somewhere, I have no idea where it is comming from but I have replaced the hose and pcv valve from the intake manifold to the pcv valve on the valve cover. I have also heard there...

I was wondering, is there a specific way to put the new TPS on because I put it on and I'm trying to get DSMLink in but its giving me a 100% throttle reading on DSMLink and its testing out at 4.67 volts and it does not change when I adjust it. I really need to get DSMLink so I can get rid of...

I have been looking into buying a 92' Talon with 146,xxx miles on it, from what I've read it has a ProSport Boost Gauge, Custom 2.5" cat-back exhaust, VooDoo III MBC @ 15.5 psi, K&N Air Filter, Hard Intake Pipe, Strut Bar, 2g shift knob, and LSD 4 bolt rear end. But it pops out of first gear (He...