Ok gotta quick question, besides foreignmuscle.com who does eprom tcu tuning??? Thanks in advance :thumb:

Man i need to find a to find a auto awd eprom tcu, but i cant seem to find at a decent price there are some different options of tcus; Eprom or non-eprom 2 plug or 3 plug harness 1.8, 2.0 fwd, 2.0 awd Turbo or non-turboI have 2plug and a 3plug harnessesBtw i know 1.8 and 2.0 n/t tcu...

good stuff!!!check it out.Automatic Dsm's

i have an awd auto colt project for drag no autoX :i have an awd auto tranny with an open front diff... today i just pick up a 3 bolt rear open diff that i plan to swap the complete ring and pinion with open diff into a 4 bolt lsd rear,... here are my options... i have 3bolt open diff auto...

So I have a 1990 dodge colt that I'm planing to swap my 4g63 into. The 4g15 thats in the colt now has a bad bottom end, I still wanna drive this car daily while am building my 4g63. My question is I know there is a 12v and 8v 4g15 I have an 8v but can I swap any 99-94 4g15 block To my 8v head...

am buying a d50 truck soon. at the moment am working my 4g63 colt and i always wanted a rwd 4g. and i have couple of questions....1.the d50 am buing has an auto trans that has fluid pouring out the vent when operating, is the this an easy fix or should i look into buy another and possibly...

does anyone know who makes or sells carbon fiber coil on plug plates:hmm:?

i just bought this 16g and the divider on the hotside is ported out can anyone tell me if its ok to run the turbo like this or should i replace the hotside?

well i just pick up a blown 16g that i plan to rebuild but i took a look at the exhaust housing divider...and the divider has a almost square shaped piece of the divider "ported" out its about the size of a quarter. i know this is to prevent boost creep but my question is should i go ahead and...

hey guys iam going to be tearing down my motor pretty soon and i would like to know what prices should i look to pay for each of the following services...rotating assembly balancing? shotpeed rods? head hot tanked cleaned? bead blasted cleaning on block and iron exhaust manifold and...

iam planning on installing some evo 8/9 struts and springs on my 1g here to get a decent and comfy 1" drop, does anyone have any pics of a 1g with them installed?

iam shopping for tires for my fd wheels , two options 225/50/16 or 245/45/16i just wanna know the benifits of running a 245 series tire instead of a 225

i have option to go either awd 5sd or fwd auto, what are the disadvantages and advantages between the two, i like shifting gears and getting amazing traction but i ve seen what some autos can do on the strip, less weight, no miss shifts and less broken parts never had an auto dsm yet but it...

does any know where to get a 1ga cf hood and light covers also? only person i knew was franks custom fiberglass but he has stop making them.:confused:

my goal here is keep my stock 90 tsi wheels to retain sleeper look and still have braking superior to the 2pot calipers... my first attempt to big brakes was upgrading to a 93 awd rotor and 2pot caliper but now i still want more braking power. next i look into 3kgt vr-4 calipers but i would...

today i picked up a m.c. from a 2000 eclipse v6, me being curious i checked the bore suprisingly it was 1 1/16 inch bore!now to show you some differences between 1990 tsi awd 15/16(yes 15/16!) and the 3g 1 1/16as you can see on the left the thicker 3g and on the right 1g 15/16 m.c...

i wana know where i can find evo 8/9 valvetrain parts ;retainers,spring,exhaust valves and rockersplease dont hit me with the "just get bc or aftermarket valvetrain parts" iam looking budget upgrades

does anyone where i could get a hood like this one?, with no lights.

this is how everything looked as i opened it upinside covernow i think its in reverseunder syncrocan anyone tell me if there is any parts missing or if something place incorrectly? thanksive searched need more infoso what exactly am i gona have to replace...

ok ive been doing research on my 4g67 head + 4g63t/evo8 pistons combo, and ive calculated my compression ratio to be 9.2:1, is this to high for daily boosting, iam aiming at 9.1-9.0 to 1 ratio and maybe if i trade out my 3-layer headgasket for a 4-layer headgasket can that bring down my c.r. a...

i need new oem quality front axel for a 90 awd tsi? does anyone know where to buy some? not autozone or orielly's!will fwd axels fit awd transmissions?

last weekend came a cross some dirt cheap starquest wheels 50 bucks! i know you cant staggered awd tall (ex. 17inch wheels in and 18 inch wheels, big no no) but i wondering because the starquest wheel are offset wide, 205mm in front and 225mm in the rear (this the tires width) but both wheels...

iam looking to swap my 2g pistons out for evo 8/9 piston (the pistons that look similar 2 manley pistons) and i have a spare 4g67 head (big ports/small cc) that am gona swap turbo shafts to, my question is with a 4g67 head + evo 8/9 piston combo + stock head gasket what would my compression...

does anyone know where to find complete weatherstirpping kits for the 1ga talon?

i own a 90 awd tsi and am in the process of gutting it and am trying to see which modules am gona keep and what these modules do, so can anybody help identify these modules and here are serial numbers: Module MB543651 Module MB942485 Module MB627835 Module MB823263...

i have eliminated power steering on my awd tsi and i wanna know what model dsm has a manual steering rack that i can swap?WTF

this is my 2nd 1990 tsi awd. i bought this talon for 200 dollars, it was pretty much complete minus a motor, ive completed what i like to call my stage 1 wieght redution. right now am gutting the engine bay, getting it ready for shaving and paint. then am doing the body...the body is very...