hey guys I just picked up a Dodge Ram 50 (mighty max). I was wondering will the trans bolt right up to a 4g63? I have a non turbo 4g63 laying around with 105k miles. What else would i have to do for the swap?

The thing is you dont want your tires to slip. You want to keep your rpms down. Go easy on burnouts. remember you have a stock trans, or get awd.

Tech Guide: 2G 420A Power Upgrades - DSMtunersand my car was 500

he has a 14b turbo

hey i seen that on craigslist :) lol

why dont you take the block to the machine shop

do you really have to change the intake manifold? or can you just swap the fuel rail?

got it out thanks

hey guys I am swaping my wiring harness for the turbo one and was wondering how to get it out from inside the car? do i have to take out the dash?

If you are going to stick with the stock turbo you dont have to change the pistons for stronger ones. Just turn up the boost. I think you can turn the boost up to 13psi-14psi on the stock fuel system. Yes you can swap evo pistons if you want to, but if you were going to swap out the pistons you...

take off the oil pan and see if there is oil squirters

do you have a cat?

you can pay 100 bucks but then blow it in a month. Just get a true 16g turbo, or get one that is blown and rebuild it.

Replace you rotors and pads. If you want more stopping power get yourself 93-94 calipars.

i hit 129 with the non turbo 2.0L

k thanks guys!

how do you take them out from the trans?

DSM Graveyard - Your #1 Source for DSM Parts!

550 or 650 injectors? I heard that 650's are are to tune.

is there any other way to tune other then getting a dsm link? i wanna get 250-300whp is this set up good for that

Hey guys I am rebuilt a 4g63t to swap into my car. I need to swap the fuel pump also, so i dont even want to get the stock turbo one because after I break the engine in I want to start to mod. My question is what fuel pump should I get? The walbro 190lph or the 255lph? Also what size injectors...

or do a 6 bolt swap :)

I'm swaping a turbo engine in my n/t car. The engine came out of an awd car, so i cant use that starter plate. Now is the n/t fwd starter plate the same and the turbo starter plate? My car is a 92 and the turbo engine is 90.

Does anyone have any pictures of there engine on a engine hoist, this weekend will be my first time pulling out a 4g63. I dont know were to hook it up to the engine.

how did you tape off the letters on the valve cover and the intake manny?

Go on ebay to find the wireharness and ecu. I am also doing the same thing. You will need a 1g mas, Intercooler, intercooler piping, tubo tranny, bov, turbo fuel pump, turbo intake pipe. I think thats it, but you will need a complete engine try to get a 6 bolt.

dude even the N/T 2.0L is slow just go with the turbo.

ok thanks guy

not at all dude ok good i thought i needed to get a new block, now i just need to find a really good machine shop

so what carquest is not a real machine shop? because that would explain alot

hey guys i have a 6 bolt turbo engine that I am building and read the wrong torque and it broke. I took it to carquest and they said they cant get it out it is to strong. my question is. Should I take it into another machine shop or give up on that block?

look at the gauges!!

what are the torque specs of the main caps?

thanks dude18 + 90” -100” turns it said that for the main caps? how do i do that?

hey guys I was wondering if there is a site with all the torque specs? because i am rebuilding my engine thanks

ok what do i need?

ya thanks guys, but what are the parts i need?

I'm rebuilding my engine (stock rebuild) Should i get a new oil pump? or am i ok with the old one?thanks mike

ok thanks91-94 Eclipse Talon Laser turbo ecu :eBay Motors (item 320440442761 end time Oct-28-09 14:13:25 PDT)found this one

so if its non eporm can cant have a dsmlink thats the only thing?

what the difrence between the eprom ecu and the non eprom ecu?

k thanks

i mean do I have to run 93 when I swap my turbo 4g63 into my N/T body.

I am swaping my turbo engine really soon. I was wondering if i have to run a higher octane level? or can i run 87?

ok thanks guys!!

damn ok thanks for all your help guys. How should i get the block ready?

ok you guys think napa will do that? There is a napa 1 block away from my house lol.

were do they hone them at? and how should i get the block ready?

can i do it myself?

hey guys i was reading on the form about cylinder honing. I am rebuilding a turbo 4g63 before i do the swap. Now the cylinder walls are in good shape, but should i still get the block honed anyways? I head I can take it in to a shop, but I also heard i can do it myself with a bottle brush, but I...