So every year after driving 200+ miles to the shootout, i seem to come driving home and 25 minutes into the trip my car at cruise decides to misfire terribly to the point where it'll eventually die and i have to pull over. Heres what happens;I would be driving along and this misfire would come...

Hey ladies and Gents.I am having a weird misfire after the car warms up to operating temp only when going into boost. The car idles fire and is fine at low rpms for putting around. As soon as the turbo is about to get into spool, or after half throttle, it chokes out around 3000 rpms. The...

Alright everyone, I am having some issues with my DSM.After finally figuring out that i plugged the Crank Position Sensor plug into the A/C connector causing the car not to start, i plugged it back into the right connector and the Car starts but refuses to stay running.I just completed the...

Will this axle be the whole assembly consisting of the axle, intermediate shaft, and the bracket?I have a 97 eclipse GST, AWD swapped 5 speed with a 95 Trans. Looking to buy a 95-96 Axle with the bracket that bolts to the engine, not the ac bracket. Would this be the right one?Is this the...

Hey guys, i been trying to figure something out. (I have a 97 Eclipse GST, AWD swapped, with a 96 Transmission.)I understand that you need a 95-96 a/c bracket with the 95/96 axle and you need a 97-99 axle for a 97-99 a/c bracket..But does it matter which transmission you have? I have a 96...

Hey everyone! i haven't done one of these build/journals since 2009, and i have to say.. I am pretty dang excited!My last build was on a Spyder very long ago when i was a frequent forum guy. Since then i finished the Spyder then i sold it to buy my beautiful DSM that i own now. I have had 20...

It started on way home from the dsm shootout. ill go over a fast story of what it did.. and summary of mods.I left the shootout and drove 2 hours and all of a sudden i noticed my wideband reading 16-17/1 and straight red.. i couldn't hit boost, and i could barely move because it felt like it...

So i have two codes showing..i have read that to fix the code p0105 you must clean the MAS, or get a new one.. Any other information on this would be appreciated..Also, i know this code is very vague, i have read up a lot on it.. What do you guys think code p0300 could be??Thanks =)

Just want a quick reassurance ..Will the part number (60889) work on BOTH the inner, and outside side of the throttle body? I can't find the other part number through advanced auto, but i was wondering if this gasket will work for both sides (the side where the elbow meets the throttle body...

Hey guys, I've been having this weird steering noise for quite some time now..It gets worse as you drive longer distances..Heres the link to my photo bucket with the video... lemme know whatcha think...

Just a short background..Background: My car overheated, fans weren't kicking on, i saw the wire/connector to fan was melted beyond help. So we ended up just making the fans on a switch.. Long story short, my wire caught fire because i was a idiot without a inline fuse, and the battery then...

SO my starter has been doing this for a year now, i replaced it last summer and it never did it before..4 years ago, we replaced clutch and all that jazz, and the starter didn't do this, i replaced starter last summer because it ended up stop working and the new one ended up grinding for some...

Soo.. Long story short, i bought a 1999 oldsmobile alero, drove it for a year, sold it, and bought a 1995 Eagle Talon..The last owner mistreated this talon, and a few days before i went back to college, the talon needed its timing belt done, and when we went to replace it.. the valve bent...

I did a compression test on my Talon tsi awd today while i was work.. if you remember the post yesterday i am having a blue smoke issue from the exhaust.. Mostly once the car warms up..I checked out my turbo for shaft play, this one has very minimum side to side, no in and out.. feels good...

So i was driving back up to my college, its 50 miles total at about 40 miles i turned my heat off because i had it on whole way and it was hot as shit, and i noticed my temp gauge go up a little over middle, not 3/4 of way but close, then it went back down.. not sure if it went back down because...

Soooo, you all know i have my 97 Cayenne GST, Well, this kid and his dad offered to sell me their 95 auto talon tsi AWD for $1200The car has 109k miles on it, and COMPLETELY stock, even the stock air box.The car from what i can see what maintained decently..I went over to check the...

So i been waiting to fix my door locks for a while now considering my door handles both broke and i wanted to fix those..So i got two new door handles im about to install and i cant figure out for the life of me how to get the alarm/door locks to work..When i push down the door...

I am having the weirdest vibration which seems to be felt most in the gas pedal..I drove to the dsm shootout and the whole time i felt a vibration in the pedal, but i can't tell if the vibration is coming from directly below on the floor in the front of the car, or if my rear end is...

I just started noticing my car has a weird gas pedal vibration. i have no idea why it has one though..I have 17' XXR 527's wrapped in 245/45s.. It is almost like the vibration is like i can feel the road perfectly, any bump i can feel in the pedal if that makes any sense.. And it doesn't...

I took my car to my work to get aligned..We got the car up on the rack and we got the front to be 0 on both sides.. As soon as we took the steering wheel holder off, the wheel turned to the left.. We didnt think anything of it.When driving my steering wheel was turned to the left, and...

Every so often my car will stop running like its normal, awesome self, and it will run like crap..Its about every couple hundred miles it does this issue, and normally if i turn the car off and i don't drive it for a few hours, the issue goes away.MY ISSUE I AM HAVING IS: -- Sometimes i will...

My tie rod on passenger side is sitting crooked where the threaded section goes into the knuckle.My driver side tie rod doesnt do that.. I just replaced my passenger side one and it looks like this,..Why is it doing this?

So while i am driving with my wheels, XXR 527s 17x8.25 +35 wrapped in 225/45 tires, my car seems to go from one side of the road to the next, kind of like my alignment is off really bad. And also at 55 mph to 60mph there is a weird vibration that i can feel in the steering wheel and in my gas...

So this kid called me up and said he bought an eclipse and drove it home and it overheated..70 miles away he kept driving and pulling over to fill it up..The next day the car won't start, it cranked, but won't start..I did a compression test and all the results come back with under...

I replaced the door handle. and i swear i did it right.But i believe the actual lever is bent inside the door panel that the door handle connects too..Can you buy these levers anywhere?

I'm in class and can't look up the information because for some reason my school's computers only let me post..Anyway; i was wondering with the 2gb side skirts, with the clips holding the side skirts on, do they also use double sided tape to hold the tops flush to the body?If so, what...

This is the legit most noobish question i will EVER ask in my life on tuners.But, If i am monitoring knock on ecmlink.. and i registering .1 or .2 knock counts at like 5k rpms at 20psi.. I am fine right?What i am concerned about is, i hear some type of not knock, but a tap.. kinda...

My low beam on my driver's side is not working anymore.. The high beam DOES work.. I run HIDs 6000k 55W from DDM tuning.. I swapped the driver side HID over to the passenger side and it works just fine..I then tried swapping a old headlight assembly over that i know works, and same thing...

Wow.. Boy do i love my car.. Have to show you guys this picture that taken today...v

I swear this is on way to norwalk, on the way to the shootout.I wanted to stop and take pictures at some place like this last year.. but i ended up not doing it then saw this picture on Facebook..Look familiar to anyone?!?I must know!Update://I surprise my own self with this memory of...

I bought Nex coil overs off someone on the forum, I installed them, and everything went smooth..But my back to coil overs, when trying to lower or raise the car, all 3 rings spin at same time.. is this suppose to happen? i am so confused and don't have any idea what to do.. Are the rings...

I noticed some new cars have a tint like layer on their side mirrors..I know one does not simply just tint there side mirrors.. But how do i get one that can auto dim or be "tinted"Does mitsubishi have anything like this that i could use on my 2g? Or kind of like a flip up/flip down like all...

So my girlfriends car broke down last night.. Timing belt ripped.. Towed it to my buddy's house and i wanted to find out if the motor was an interference motor.I posted on their forum, and of course they know my car, and try to talk shit on it haha. Yet, they made fun of my "built" motor and...

Read all the threads on tuners, and saw that Mitsubishi doesn't make carpet anymore or sell.. So i was wondering where is the next best place to buy carpet from..Also what color should i get? I need a tan color..

or how about my eclipse and my buddys evo?

Yup.. I asked you guys if i would need to do anything to fit my wheel..Confirmation is: 17X8.25 ET: +35 FITS PERFECT with a 225/45 tire.So for everyone putting these wheels with this EXACT size on their car, i am sure you are fine with these dimensions. i didn't have to roll, or pull or...

Ill Start off, Heres mine..I am rocking the "C0rnF3d" plate, with a tinted Cover!Yes, i copied off of Gofer.. <-- Love your car man =)

I am going to be going with XXR 527s 17X8.25 +25 wrapped up in 225/45's..I am also lowered about 2 inches all way around i believe.. not to sure, bought my car lowered, and not sure if this will effect the wheels fitting or not..But please, any information available would be much...

I am calling out all the Wheel Fitment/Suspension Pros out there!!I am looking to sell my wheels on my car now and get new wheels in the next week or so...But heres my issue, i am trying to figure out wideness of wheels and offset!!Here are the wheel choice i am looking up! XXR's...

17" Rota Wheels 17x9 5x114 3 42 Grid Gold 11 TC 06 07 08 Eclipse Civic Accord | eBayI am looking to buy 17' Rota Grids 5X114.3Will these wheels bolt up to my car without any trouble??i read that the offset might not work with our 2gs.

Hi, i am sure you all know me by now, i been on this site since 08' and try to help as much as i can. and i love to share my dsm with you all because she is honestly one beautiful machine..But i feel lost, with not one person to talk too. I know some of you know me personally so don't judge me...

Selling my spyder.. will give a good deal to the person locally who will come buy this car..Here's the post i posted on tuners.. Check her out..1997 Eclipse Spyder GST - DSM Classifieds

Hey guys, i been thinking about making a funny video about DSMS, and the community and the things we say..Kinda like all the other videos out there about the "VWS crowd, and the Honda Scene,..."What all should i incorporate?? Ideas?!Shit Honda Guys Say - YouTube^^ that is where...

Spirit. Thank you. Thank you for providing us with the direct-port nitrous... uh... injection, four-core intercoolers, an' ball-bearing turbos, and... um... titanium valve springs. Thank you.;)Happy Thanksgiving Everyone! Hope you all have a great one.

I won't lie to you, i didn't search the forum for this question, i didn't have enough time today to check everything out..Anyways, i bought a motor, and it had a bad head gasket.. I replaced it, and now the car smokes a lot of white smoke. And i feel like the head is warped.. So now my...

it won't let me post anything in classifieds because it says i have a picture quota.. any picture i try to upload even the smaller of KB it won't let me??How is this possible? i am trying to sell stuff and it won't let me?

Missed the Calendar Deadline, and i am not aloud to send them in 2 days late..So i don't want you guys to not be able to see my gorgeous car and the pictures i was going to submit.. Anyway; Here they are.Enjoy..

I have no idea where to go from this but heres the background on this..I bought my first car back that i owned 5 years ago, the motor shot a rod, I replaced the motor and turned it over, the head gasket was shot, replaced with my old head, a head gasket, and new head bolts...I turn car...

Is anyone around the Monroeville area able to come over and a time a motor in the car for me sometime today!? Ill tip !! Or have the tools I can borrow?!Text me at 4124800282 thanks!

Any ideas??I'm replacing the head, so most of the engine stuff is out, and the shift linkage is pulled off.. so how do i get the car into "neutral" or "drive" or whatever to push it straight? It'll move backwards fine, but i can't push it forwards... =/it is an automatic.car was just...