The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners

  • Join the Community!

    DSMtuners is a massive archive of DSM information - but more importantly, it's a COMMUNITY! Join in and participate with other DSMers, and invite all of your DSM friends to make this place their home. Chat with others, create a build thread, post questions and answers. Get involved! Logging in will also remove many of the advertisements, along with this notice. ;)

Please Support VR Speed Factory
Please Support Morrison Fabrication

Search results

  1. El Cuervo

    1G Battery relocation cable through firewall.

    So, how are you routing your harness wires from the ECU, to the enigne Bay? So you are using the stock wire harness hole for the battery cable (s). And the wiring from the ECU to the engine bay, such as sensors and all that? How will you route these? Thanks man!
  2. El Cuervo

    1G Battery relocation cable through firewall.

    Yeah. Pulling the fender is an absolute no.
  3. El Cuervo

    1G Battery relocation cable through firewall.

    Makes sense. I'll look into it. My thing is that I'm trying to avoid drilling a hole on the firewall. But this is definitely an option. Thank you very much for the idea.
  4. El Cuervo

    1G Battery relocation cable through firewall.

    Interesting. So what do you suggest?
  5. El Cuervo

    1G Battery relocation cable through firewall.

    Awesome! Hey man, thank you much for the information and taking your time to answer my questions.
  6. El Cuervo

    1G Battery relocation cable through firewall.

    Awesome! So you just made a hole on the wire harness rubber grommet boot thing and routed the cable through there?
  7. El Cuervo

    1G Battery relocation cable through firewall.

    Oh. Ok. Would you happen to have a picture on how it looks? Like a picture of the wire harness with the cable going through it from the engine bay. That would be great!
  8. El Cuervo

    1G Battery relocation cable through firewall.

    Really? How did you go about? Is there even enough room? The cable that I'll be using is a 0/1 gauge cable.
  9. El Cuervo

    1G Battery relocation cable through firewall.

    Hi guys. I have a question. I'm relocating my battery to the trunk on my 1g. My question is: For those that have 1g DSMs. Where or how did you route your cables through the firewall? I read that some have route the battery cable through the hole that's close to the clutch and brake pedal on...
  10. El Cuervo

    2G DSM 3D Printed Front Bumper Cold Air Ducting

    That would he great! I have been thinking about doing something like this for the 1g in order to bring proper cold air intake to the filter. Maybe using some from of big velocity stack and connect it to a 4 or 5 inch pipe all the way up to the filter? But a velocity stack would look to obvious...
  11. El Cuervo

    Who's running boostin's KDN shifter?

    I'm running the Boostin Performance KDN shifter since it came out. This is on a 1g. I had to do some trimming inside the center console in order to make it fit but, I was able to make it fit nice. Personally, I have not used the 1,2,1 and 2,3,2 lock out anti money shifts. This is because I'm...
  12. El Cuervo

    Superchargers On Mitsubishis?

    What car were you thinking about supercharging? Can it be done? Absolutely! Lots of custom work of course. Is this on a N/A 1g or 2g? Or are you getting of your turbo and going Supercharged? Or are you going twin charged? If it's N/A, you will be limited to a few psi, depending on the size...
  13. El Cuervo

    2G DSM 3D Printed Front Bumper Cold Air Ducting

    This is great . Can you offer them for the 1gb?? Like custom? I would love a cold air intake like this one for the 1g.
  14. El Cuervo

    New Product release! DSM brake brackets (3000GT brake swap)

    Thanks Chris. Yes, it seems like the 3000gt brake calipers are not just bulkier but maybe also heavier than the evos which I don't mind at all, as long as they fit with evo 8 wheels on a 1g. I also read that it's possible that the 3s calipers have bigger pistons than the evos. Not too sure about...
  15. El Cuervo

    New Product release! DSM brake brackets (3000GT brake swap)

    Question about these brakes. How do they compare to the evo 8 and 9 calipers? Clamping force, size of rotors etc. Thanks
  16. El Cuervo

    1G Lc1 wideband wiring question

    I have another question in regards to grounding the LC1. Can I put the wideband gauge ground with the blue wire and white wire from the LC1 in one single crimp loop and attached it to the metal frame behind the radio? Just to keep things simple. Thanks.
  17. El Cuervo

    1G 12v power sources

    Jason, thanks for the information. Yup, that's exactly what I had going on and confused the heck out of me. It's good to know about it.
  18. El Cuervo

    1G 12v power sources

    Ugh. Darn. That's strike 2 for me today. Hahaha. Ok here are some pictures. This yellow wire that I'm pointing with the red multimeter lead is the constant 12v power. This red wire is ignition switch 12v power. This blue with white striped wire that connects and powers the cigarette...
  19. El Cuervo

    1G 12v power sources

    Ok guys. Update. Ugh.. stupid me. Well, you lean as you go. What was happening is that I would turn the ignition on. This would sent power to the wires that were of course, in this case 12v sources. My problem was that the ignition switch 12v only wires, still had voltage in them while I was...
  20. El Cuervo

    1G 12v power sources

    Thanks Marty. Please tell me, what a m I doing wrong here? For example. The cigarette lighter thing. Isn't that supposed to be a switch or ignition power source? Why does it only work when the ignition is on but not when the ignition is off, yet I'm able to get a reading with my multimeter with...
  21. El Cuervo

    1G 12v power sources

    Hi guys. I'm having a little problem here in regards to finding some power source wires. I'm looking for a Constant 12v power source and an ignition only 12v source for some electronic gauges. I found three 12v wires with my multimeter. They are 1 red wire that connects to the radio, 1 yellow...
  22. El Cuervo

    1G Lc1 wideband wiring question

    Thanks Steve. Yeah, I'm installing it on the stock location. I just decided to wait till I get Ecmlink. This way it's less complex.
  23. El Cuervo

    1G Lc1 wideband wiring question

    Hey guys what's up? I have a question in regards to wiring the Lc1 wideband on a 1g. I have searched but can't find an answer to this. I'm about to install my old yet brand new Lc1 wideband. I'm just bringing my car back to life after 10 years. I don't have ecmlink just yet. When wiring...
  24. El Cuervo

    2G High boost, slow acceleration

    Well, I'm glad I'm not the only crazy one here. That makes 3 of us, including the opener by default LOLLOLLOL.
  25. El Cuervo

    2G High boost, slow acceleration

    . Right!!! For all we know, he might be just revving it in neutral in his driveway to see if he can actually build boost. Who knows, the faint sound of a turbo on neutral does have a nice tone to it. Maybe he got bored and for a moment, let his imagination run wild and pretended that he was...
  26. El Cuervo

    2G High boost, slow acceleration

    Well, since we don't have much information on the vehicle, but only what's on the first post, the only option that we have is to speculate, process of elimination and to just play the guessing game till the opener submits more info. So with this said, these are my opinions. I'll assume that...
  27. El Cuervo

    Oil cooler and temp. data?

    5 years later. Did you ever get to find out any data between running a ffofh without an oil cooler and a 90s ofh with an oil cooler? If so, could you please share? It seems like nobody has posted anything. Maybe nobody knows. Thanks man!
  28. El Cuervo

    1G PP Mustang TB adding ISC

    You are very welcome
  29. El Cuervo

    1G PP Mustang TB adding ISC

    And it doesn't matter if it's 1 inch or 10 inches away from the throttle body. Either before or after.
  30. El Cuervo

    1G PP Mustang TB adding ISC

    That's a very good option too. You saved alot of money. In my experience, it doesn't matter where you plumb the isc, as long as one vacuum hose is connected before the throttle body and the other one is after the throttle body. The length of the house makes no difference, at least in my...
  31. El Cuervo

    1G PP Mustang TB adding ISC

    It seems like they only have the 3 bolt isc. They show pictures of both, the 2 bolt isc and 3 bolt isc. They also only mention do comment about the 3 bolt isc. I have the 2 bolt one and it's what I'm running. I bought it many years ago when they first came out.
  32. El Cuervo

    1G PP Mustang TB adding ISC

    This is what I have https://magnusmotorsports.com/wp-content/uploads/2018/04/remote-iac-1.jpg
  33. El Cuervo

    1G PP Mustang TB adding ISC

    Magnus motorsports also has or had a remote mount solution for the isc/iac. They had it for the dsms but it seems like it's now advertised for the evos and supposedly late model dsms. I have this exact one on my 1g with a ford TB and it works great.
  34. El Cuervo

    Please Help Out Our DSM Vendors!

    Extreme psi. They are great! Ordered a whole bunch of stuff. I'll also be ordering from ecm tuning soon. Unfortunately, I'm going to have to give my money to another company for a custom exhaust header since none of the fabricators here are intrested in fabricating a custom N/A header. Money is...
  35. El Cuervo

    420a exhaust ideas

    Ahh perfect. Thank you. Did not mean to steal the thread at all. I was also wondering what's the best and highest flowing exhaust header. I talked to some of the vendors/fabricators here to see if they can fabricate me a custom N/T exhaust header but they aren't interested.
  36. El Cuervo

    420a exhaust ideas

    Hey guys, quick question. Would anyone happen to know the diameter of the primary runners on one of these aftermarket exhaust header for the 2g N/T? Thanks guys.
  37. El Cuervo

    4.6 ford tps wiring hook up?

    Hey man, did you ever get the ford tps working on your 1g? I'm having the same issue. I'm also using the same ford tps that you have. How did you get your ford tps to read 10% at close throttle and 100% at fully open throttle? Also, what did you in regards to the close idle position switch...
  38. El Cuervo

    2G JayRacing Arc2

    That's interesting. So no tensioner needed! Perfect!. Thank you very much man!
  39. El Cuervo

    2G JayRacing Arc2

    Cool setup, but I have a question: What are you using as a belt tensioner for the belt from the crank harmonic balancer pulley to water pump pulley? Thanks .
  40. El Cuervo

    Water to Air Intercooler High IAT's Help?

    Did you ever fix your high air temp problem? If so, what was it? Thanks.
  41. El Cuervo

    7 bolt 4G64 in a 1g?

    Reviving this from the dead! So as everyone knows, there is a huge shortage of 4g64 6 bolt blocks for the 1g chassis. This leaves us with 7 bolt 4g64 blocks. Mounting the engine is the problem here since 2g engines had the Mounting on the transmission and 1g have it on the block. So, if using...
  42. El Cuervo

    1G Any smaller brake booster for 1g?

    Hey guys what's up. So, my question. Is there any brake boosters that are smaller or acutally thinner than the stock one to fit into the 1g dsm that will mate to the stock master cylinder or even a smaller master cylinder for the 1g? I think that the colt or mirage might have a smaller...
  43. El Cuervo

    1G 6 bolt head intake port diameter?

    Well, I was thinking of 12g but don't know if thats too thin for runners or even 10g or smillar size. This would also be for the plenum.
  44. El Cuervo

    1G 6 bolt head intake port diameter?

    Thanks guys. I already have a flange that I purchased some time ago. I'll check the website that Brian posted. If i can't find what I'm looking for, then I will have to do what Dale suggested. Finding 2 1/4 aluminum piping could be a challenge. I only see piping with increments of 1/2...
  45. El Cuervo

    1G 6 bolt head intake port diameter?

    Ah I see.. nice! Thank you very much Dale! Now, about the steel bars that you mentioned. Are these used as a mold of sort? Someone should just sell these rectangle to round aluminum pipes for intake manifolds.
  46. El Cuervo

    1G 6 bolt head intake port diameter?

    Thanks Brian. That's what i wanted to know. So a 2.21 diameter pipe will flow about the same as the rectangle intake ports? I could use the same rectangle shape for the intake runners but its hard to find rectangular shaped pipe, so i will just try to source a circle shaped pipe of closer...
  47. El Cuervo

    1G 6 bolt head intake port diameter?

    Ah thanks. So if converted to a round shape, would it be about 2 to 2.1 incles in diameter? I'm asking this because I might build my own intake manifold and would like to know the runners inlet diameter. Thanks
  48. El Cuervo

    1G 6 bolt head intake port diameter?

    Hey guys what's new? I have a quick question here that as simple as it sounds, I haven't been able to find the answer. What is the inlet diameter of the intake ports on the 6 bolt cylinder head? I believe the exhaust poertse are something like 1.5 to 1.75 inch in inlet diameter, not too...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Feal Suspension Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com OHM Racing Raven Fabrication RixRacing RockAuto RTM Racing SouthBay Fuel Injectors STM Tuned VR Speed Factory
Top