The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

  • Join the Community!

    DSMtuners is a massive archive of DSM information - but more importantly, it's a COMMUNITY! Join in and participate with other DSMers, and invite all of your DSM friends to make this place their home. Chat with others, create a build thread, post questions and answers. Get involved! Logging in will also remove many of the advertisements, along with this notice. ;) It will also allow you to view images in threads.

Please Support STM Tuned
Please Support ExtremePSI

Search results

  1. 5 speed awd parts

    For sale 1g 5 speed awd parts

    5 speed awd parts. I swapped my car over to an auto.Jack transmission rebuild - ultimate synchro package plus gear treatment. The transmission has less than 3k. Paid over 3500 for the rebuild. Asking 1750 91+ shifter base 91+ shifter cables 91+ 23 spline transfer case Pedal assembly -...
    $1,750.00
  2. TK9er

    1G Forced Four 150

    Did you make that set up?
  3. TK9er

    1G Forced Four 150

    Its going to be a weekend warrior I guess. I have seen some of the maps. I plan on doing a paddle shift, eco/sport mode - the soft shift (I think that might be the eco mode), and what I am really excited about is the staging setting. I am also putting the gear indicator in the dash. I'll...
  4. TK9er

    1G Forced Four 150

    I am really excited to get it going!
  5. TK9er

    1G Forced Four 150

    Thanks so much! You have been very helpful.
  6. TK9er

    1G Forced Four 150

    I thought I would be able to manual shift through the shift box. Do you still need the inhibitor switch for that?
  7. TK9er

    1G Forced Four 150

    I am getting ready to install my shift box, but want to make sure everything is correct. My car is a 90, so there is always something screwy. I think I have the wires that go inside figured out.- the two red wires are 12 + ECU pin 110 - black wire is ground ECU pin 106 - orange/yellow wire...
  8. TK9er

    1G Intermediate shaft/jack shaft

    So, I guess I'll be getting an intermediate shaft with an auto bracket. Thanks!!
  9. TK9er

    1G Intermediate shaft/jack shaft

    Thank you! The axles have different part numbers, but I read that they are ok to use, is that correct?
  10. TK9er

    1G Intermediate shaft/jack shaft

    I am doing an auto swap on my 90 awd. I feel like I have got different information at different places concerning what I need. I was hoping to settle it for myself. Do I need an awd intermediate shaft from an auto?
  11. TK9er

    1G Coolant overflow question

    Ok, good. I don't feel crazy. I don't know why they would sell something that would have one...
  12. TK9er

    1G Coolant overflow question

    Ok, I feel kind of dumb for asking this, but does the coolant overflow can need to be vented? The reason I ask is mine is not. It has a hose to the tstat housing and an o ring sealed screw on lid ...it also does this if it get too hot ... I'll open it, add coolant, and it'll do it again in...
  13. TK9er

    General wideband o2 sensor questions

    Well, I think it was copper anti seize. I must of put too much on. When I took of the sensor I could see how it must of melted and ran right into the hole of the sensor. I did end up putting an bosch in anyway. Works fine now!
  14. TK9er

    General wideband o2 sensor questions

    I am starting to suspect it might be a wiring thing... my other innovate gauge started acting up a few days later. The oil temp jumps around like the AFRs... UGH!!!! Why cant anything be easy!
  15. TK9er

    General wideband o2 sensor questions

    how did you check this? All of my stuff is tucked away and wrapped in loom. Can you ohm them out at the gauge?
  16. TK9er

    General wideband o2 sensor questions

    I have an Innovate MTX-L Plus gauge and my AFR started going pretty crazy a couple days ago. I figured it was time to replace my wideband. It is not that old at all, but I have it in the stock forward location. I ordered a cheaper one off of amazon...
  17. TK9er

    1G Electronic boost control

    yeah... i cut it way off, tucked it, and wrapped the harness when i had the whole thing out
  18. TK9er

    1G Electronic boost control

    Hey everyone. I would like to install an electronic boost control to my 1990 TSI. The problem is when I originally went through my car I did a bunch of clean up on the wiring harness and moved some stuff around. At that time I was not planning on running an electronic boost controller, so I...
  19. TK9er

    1G JMF manifold

    Thanks, but I have never run the car on a 90 TB. I switched to the 91+ right away.
  20. TK9er

    1G JMF manifold

    That's it before installed it.Yep, my TB is a 91 turbo throttle body. I must of deleted the picture, but without the spacer I made, the throttle cable side of the opening was not covered. I made a 3/16 spacer to cover the gap.
  21. TK9er

    1G JMF manifold

  22. TK9er

    1G JMF manifold

    Thanks, I swapped it over to a 91 and up throttle body.
  23. TK9er

    1G JMF manifold

    Thread tape baby! No more leaking bolts. I got it up above 25 psi. I then blew off the tester. I do have bubbles coming from the adjustment screw on my fuel pressure regulator. Is that normal?
  24. TK9er

    1G JMF manifold

    Thanks, that is why my initial question was about thread sealer. I might try some teflon tape.
  25. TK9er

    1G JMF manifold

    I wish mine was that easy. I have had the throttle body off probably 5 times now... Tightening, replacing, and inspecting...
  26. TK9er

    1G JMF manifold

    I did check the coils they tested good.Did you have to make an adapter to mount your stock throttle body? The bolt pattern was the same, but I had to make a piece to cover up the larger opening. I have replaced the gaskets like 2 times . Gonna go broke paying shipping on gaskets! I have...
  27. TK9er

    1G JMF manifold

    And a question about the ISC. How does unplugging it help? When unplugged is it in the "neutral/middle" position?
  28. TK9er

    1G JMF manifold

    That's a lot higher than I thought, but that is fine with me. Would you be worried about the small leaks around the throttle body bolt heads?
  29. TK9er

    1G JMF manifold

    I'd have to double check, but to think it is simulated... Does that sound right?
  30. TK9er

    1G JMF manifold

    Also have new coolant temp sensor.
  31. TK9er

    1G JMF manifold

    I guess I should have explained more. I have replaced the isc motor with the new black one (and double checked the coils) rebuilt the throttle body with new seals, have a FIAV bypass plate on, the biss doesn't leak (though I'm having trouble getting this set right following the online...
  32. TK9er

    1G JMF manifold

    Hey, I installed a JMF street manifold and some kelford 272s as well as set of feal coilovers on my car. I had a guys come do a idle tune for me and we are having a horrible time. We got it good enough to get the car to run, but the idle is all over. I had a few things to fix with the...
  33. TK9er

    1G FEAL coilovers questions

    Thanks, it looks like his are the same as mine. So they aren't meant to move over the shoulder. We'll, if that is what people are doing, I should be ok.
  34. TK9er

    1G FEAL coilovers questions

    Do you remember if the lower attachment point had a step down to fit the swing arm? If I'm not making sense, I can also attach some pictures.
  35. TK9er

    1G FEAL coilovers questions

    I have a set of the feal coilovers. My question is how they attach the the swing arm. My swing arm mount has a shoulder on it. So it steps up to a thicker diameter when it's closer to the arm. The FEALs don't have that in their shock. Is this normal? I just contacted feal and we'll see...
  36. TK9er

    1G Car shuts off after running...

    Maybe, I ordered the aem 3.5 bar map just in case. You can calibrate that one! I'm just happy the car is running now!
  37. TK9er

    1G Car shuts off after running...

    It was the MAP!!! something must of gotten loose. I wiggled the wires and it would go from good to bad. I took it off and looked everything over. I was curious because I spliced in the Mitsu 4 bar from the link SD cable set, but everything looked good. I put it back on and had the car...
  38. TK9er

    1G Car shuts off after running...

    how do you test the MAP? It's a new omni 4 bar?
  39. TK9er

    1G Car shuts off after running...

    I haven't, i was going to pull the ECU and see if anything looks out of sorts.
  40. TK9er

    1G Car shuts off after running...

    I was going to pump the stuff out tomorrow probably.
  41. TK9er

    1G Car shuts off after running...

    I just got back from a 2 month deployment and was excited to drive my car. I was even more excited when it fired right up! I was less excited when it died after a few miles. The car was tuned on e85 before I left. I filled up the tank completely before I left too. I was driving fine then...
  42. TK9er

    1G I unthreaded my master cylinder rod.

    where at in the clutch travel does it start to engage. I feel like mine is rather high.
  43. TK9er

    1G I unthreaded my master cylinder rod.

    It's fixed!!! I had to take the pedal assembly out again. I put a bushing in the hole on the clutch assembly where the clutch master clevis attaches. When I had it out before I must not a put the bushing back in. The hole was a 12 mm and the pin was a 10. Fixing that made a huge difference...
  44. TK9er

    1G I unthreaded my master cylinder rod.

    I have the pedal assembly out now. I replaced the bushing and had it welded before. I did find one problem. I must not of put the bushing back in where the clevis attaches. so I have a bunch of slack there. So, now i'm looking for a 10mm id x 12mm od bushing for that. I have heard about...
  45. TK9er

    1G I unthreaded my master cylinder rod.

    Good deal! thanks for the reply. I guess i'm just confused about how to adjust the clutch. I don't want to start another huge clutch adjustment procedure, but I guess I don't understand how turning the rod effects the master in any way. I seems like all it is doing is changing the pedal...
  46. TK9er

    1G I unthreaded my master cylinder rod.

    Hey, I hate to be this guy, but this 1g clutch has me screaming. The transmission is newly rebuilt from jacks. New clutch. I replaced the slave and the master with new oem, and put a speed bleeder in. I had someone come over and help me adjust it. I was able to drive it around, but it only...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com Raven Fabrication RixRacing RockAuto RTM Racing STM Tuned VR Speed Factory
Top