The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners

  • Join the Community!

    DSMtuners is a massive archive of DSM information - but more importantly, it's a COMMUNITY! Join in and participate with other DSMers, and invite all of your DSM friends to make this place their home. Chat with others, create a build thread, post questions and answers. Get involved! Logging in will also remove many of the advertisements, along with this notice. ;)

Please Support Feal Suspension
Please Support Fuel Injector Clinic

Search results

  1. SNAKE_15

    2G -8AN fuel feed/-6AN return bulkhead install with Evo siphon

    I'll see if I can get a pic. I used the stm bulkhead fittings for the hangar with the 90° low profile(part number posted below) and on my an lines itself used straight fittings
  2. SNAKE_15

    2G -8AN fuel feed/-6AN return bulkhead install with Evo siphon

    Interesting, finished the hangar and had no fitment issues to put the cover or seat on
  3. SNAKE_15

    Resolved Tial Bov Open at Idle

    So I ended up using the 8psi spring(12-15in/hg) and worked out alot better. Not fully 100% closed but normal from the link you posted and on speed density so good to go :hellyeah:
  4. SNAKE_15

    2G 2GB Headlights into 2GA Bumper

    2ga talon/eclipse headlights are all the same and the talon 2gb bumper uses 2ga headlightsAs for OP, there will be a noticeable and ugly gap if you use 2gb headlights on 2ga/2gb talon bumpers
  5. SNAKE_15

    2g Talon

    Long overdue update but I finally got my car running :hellyeah:. After almost 8 years building this setup it's alive and healthy!Car sounds strong and healthy. Believe it or not, I literally just plugged in my injector values and the car runs solid. I still need to finish break in and some...
  6. SNAKE_15

    2G Camshaft and Valve Spring Choices

    I was running the Kelfords 272's on stock valvetrain. Not sure if a coincidence or direct cause but my car jumped timing and bent valves. Timing components were newish and oem. Car ran fine then it sat for a few days. Car jumped timing on first crank.Upgraded to Kiggly Racing...
  7. SNAKE_15

    Resolved Tial Bov Open at Idle

    So I installed a New Tial 50mm QBov but I noticed it is staying open at idle all the time even when warmed up. I have the 6psi spring which I'm assuming I needed since my vacume at idle is between 10-13. Bov closes briefly when I hit the throttle. I'm assuming this is not normal since I don't...
  8. SNAKE_15

    Resolved Banjo bolt length? For Fp 3052/inline filter

    So can anybody tell me what the correct length or part number banjo bolt I need to feed the fp inline filter to head? The standard 10mm.1.25 I ordered from extremepsi was too long and it doesn't give me a length to choose from. Hardware stores here in town don't seem to carry banjo bolts
  9. SNAKE_15

    2G -8AN fuel feed/-6AN return bulkhead install with Evo siphon

    @punk3rz with those low profile fittings did you have issues with them hitting the fuel pump housing cover and putting your rear seats on?
  10. SNAKE_15

    ECMlink Intake temp location?

    This is where I put mine so it can be hidden with the wiring.
  11. SNAKE_15

    Resolved Black Leather seat tear fix?

    Nice will do man thanks!!Another question, how can I fix the loud and annoying squeeking noise on my driver seat when I sit on it or move around and my door panels??
  12. SNAKE_15

    Resolved Black Leather seat tear fix?

    Anybody know the best way to fix this tear on my seat? Don't wanna make it worse especially since it's the 99 black interior
  13. SNAKE_15

    2G -8AN fuel feed/-6AN return bulkhead install with Evo siphon

    I'm currently in the middle of this task however I'm stuckThe nut for the 6an hits the wall so I can't tighten it. Using stms bulkhead fittings that look just like yours
  14. SNAKE_15

    2g Talon

    Not sure if he has an account here but found him on Facebook
  15. SNAKE_15

    2g Talon

    Finally installed motor. Just gotta hook everything back up and should be good to go!
  16. SNAKE_15

    Group Buy #6: VOLK 2G spherical 4130 front LCA’s (2020)

    Any update on these @99gst_racer ? Just curious btw, I know you've been super busy with other projects
  17. SNAKE_15

    Resolved OFH stud confused???

    I feel like my project will never get gone, one inconvenience after another lol :cry:So question, can I pull the sandwich piece from my 2g 7 bolt and can I reuse the new gasket that's bolted on my ofh currently?
  18. SNAKE_15

    Resolved OFH stud confused???

    2g 7 bolt head/6bolt block..Ok so the oem stud I ordered for ofh is too long and not sure what ofh I have so can anyone chime in on what I'm missing here? On my spare 2g 7 bolt, I know that it has the big sandwich looking thing in between the ofh and oil filter stud itself but I won't be...
  19. SNAKE_15

    2g Talon

    It feels like forever since I updated but with all this nonsense happening around the world, it slowed down everything.I pulled the old motor out and then started removing my fuel hard lines which was a PITA. I was lucky to completely remove them without dropping the subframe. I also cut out...
  20. SNAKE_15

    Please Help Out Our DSM Vendors!

    Can't say enough how well extremepsi has treated me!
  21. SNAKE_15

    2G Canister some hoses unhooked

    Assuming you have a 97, this is where the lines route.If you guys don't do smogs then you can delete the canister and do the egr delete
  22. SNAKE_15

    2G 8an feed 6an return

    Hey guys, finished removing my fuel lines and doing my 2g awd fuel pump hanger fittings..Question, has anybody used these stm bulkhead fittings? I went with these but I heard there are clearance issues with 2gs where the fitting sits too tall stopping you from putting the cover plate and seat...
  23. SNAKE_15

    Resolved Fuel feed&return hard line removal

    So finally removed the feed and return completely without dropping the subframe :hellyeah: PITA but after enough yanking it came out. Got the bolt out too but the brackets broke off too lol. I can't wait to finish the 8an and 6an lines and never worry about this again
  24. SNAKE_15

    Resolved Fuel feed&return hard line removal

    So I'm in the middle of swapping my stock fuel hard lines from tank to rail with AN lines on my 2g tsi.I'm stuck on removing the bracket by subframe and wondering if there's a way without dropping it???Some said they kept the lines in place but I already cut certain sections from them and...
  25. SNAKE_15

    FP Manifold Bolt Sizes

    Just checked my receipt from extreme Psi, spent 27$ for all four bolts
  26. SNAKE_15

    FP Manifold Bolt Sizes

    Don't forget to use anti seize!
  27. SNAKE_15

    Group Buy #6: VOLK 2G spherical 4130 front LCA’s (2020)

    Two more left, let's goooo!! :cool:
  28. SNAKE_15

    1G No instrumental lights/brake light fuse keeps blowing

    If it makes you feel better, I stripped my interior and wiring harnesses only to find out my turn signal switch had gone bad and was causing the short for the tail lamp fuse
  29. SNAKE_15

    2G FEEDBACK - Center Console Switch Panel/Cup Holder

    I agree, I rarely use the cupholder just on the fact drinks get in my way when I'm shifting gears. I like that idea for a switch panel so I would be interested nonetheless for different options. Would you be able to color match the tray to the color of interior?
  30. SNAKE_15

    99 GSX Rebirth/Clean-Up/Build

    There's always that happy feeling buying brand new parts even though it's not cheap! I was always told to go OEM oil pump but hopefully you don't have issues with an aftermarket one!
  31. SNAKE_15

    2g Talon

    So in a bind right now. Ironically I said earlier I wished I went with a different turbo setup. I purchased a FP 3052 drop in and go. I'm gonna call FP and ask them which turbo I should go with based on my setup and 500hp goal. Turbo setup is all ceramic coated and comes with a 38mm Tial...
  32. SNAKE_15

    2g Talon

    So found time to do the timing last night, Evo9 Kevlar belt ftw :D. Realized my pick up tube didn't fit because of the main ARP's so had to chop off the leg. I couldn't find my rear main seal gasket so couldn't put oil pan on :banghead:Hopefully I find it and get the pan on today. I think it's...
  33. SNAKE_15

    For Sale Gvr4 1417/2000

    Someone snatch it!
  34. SNAKE_15

    For Sale Gvr4 1417/2000

    Throw me some offers guys!
  35. SNAKE_15

    2g Talon

    2019One of the main reasons my build took so long was because I was stuck focusing on the appearance lol. One thing I really wanted for years was a full on 99 black interior in mint condition. All the ones i found were on the other side of country or in bad shape and i thought all hope was...
  36. SNAKE_15

    2g Talon

    So over the past few years I've been slowly but surely gathering my parts to build my Awd talon. My goal is to have a dd 500hp car which at the time was a big deal, but not so much now LOL. When it comes to me, I'm really picky you could say and meticulous about my dsm. I do not waste any costs...
  37. SNAKE_15

    For Sale Gvr4 1417/2000

    Bump! $3400 someone come get this car
  38. SNAKE_15

    For Sale Gvr4 1417/2000

    Located in Bakersfield Ca. Link below is how I started the build. Unfortunately it's time to move on this time. Might pick up a car and I already have a project on the side and just don't have the time to restore this car how I planned. It needs really good tlc before being road worthy, but...
  39. SNAKE_15

    Resolved Engine timing mount bolt size

    So I'm assuming I use the 2g size even though I'm using a 6 bolt block? I'm doing the 7 bolt head/6 bolt block combo
  40. SNAKE_15

    Resolved Engine timing mount bolt size

    I'm not sure if I'm not using the correct terminology, but I cannot find the size of the these bolts under the link that gives all the sizes. It's for a 2g mount and I'm using a 6 bolt tensioner arm, thanks in advance!
  41. SNAKE_15

    *NEW PRODUCT* AF 2G Spare Tire well delete panels!

    Nice work! Curious, is this the same product being made with Mike Buschurs as well?
  42. SNAKE_15

    For Sale 1g 90-92 timing components

    Just seen the price and made a mistake. 80$ shipped
  43. SNAKE_15

    For Sale 1g 90-92 timing components

    Decided to go with oem instead. Kit (still sealed) comes with everything minus the water pump and hydraulic tensioner. 80 shipped. Located in Bakersfield Ca
  44. SNAKE_15

    For Sale Gvr4 1417/2000

    https//www.dsmtuners.com/threads/galant-vr-4-1417-2000.512915/
  45. SNAKE_15

    For Sale 2g grey interior

    Swapped to 99 black interior so no longer need this. Front seats, shifter knob, and passenger air bag are taken but everything else is up for grabs. Dash, steering wheel (no airbag) seatbelts, rear seats, door panels and miscellaneous panels. Dash has a lift by defrost vent. If you need more...
  46. SNAKE_15

    Resolved Fuses popping 8&17

    @dustyboner thanks for the big help. I found my problem and fixed it. You were right, I had the plugs connected backwards which was causing those fuses to blow. I swapped them to their correct plugs and no fuses popped and everything works :hellyeah:
  47. SNAKE_15

    Resolved Fuses popping 8&17

    Yeah I pulled the sun visors and headliner but nothing was shorting to ground. Well since I'm not connecting the correct plug, wouldn't that be the reason for my fuses popping because everything works if I leave that unplugged and I'm thinking nothing goes there since I have the non sun roof...
  48. SNAKE_15

    Resolved Fuses popping 8&17

    Hey guys, so I pulled the harness out and traced the wire with no luckI noticed this though. On my brothers spare dash harness, the plug that I keep connecting on the kick panel fuse box to my car, I found the same plug connected here on the spare dash harness connected to something else with...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Feal Suspension Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com OHM Racing Raven Fabrication RixRacing RockAuto RTM Racing SouthBay Fuel Injectors STM Tuned VR Speed Factory
Top