The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners

  • Join the Community!

    DSMtuners is a massive archive of DSM information - but more importantly, it's a COMMUNITY! Join in and participate with other DSMers, and invite all of your DSM friends to make this place their home. Chat with others, create a build thread, post questions and answers. Get involved! Logging in will also remove many of the advertisements, along with this notice. ;)

Please Support STM Tuned
Please Support Fuel Injector Clinic

Search results

  1. Archer Fabrications

    POS Carbon Creations hood

    Oil them? Sounds like you might have miss alignment never had to oil mine even when I lived in canada where it was cold as F, the striker pin should pass through the I bolt easily if installed correctly and not need any oil in my experience. A slight miss alignment will cause issues opening and...
  2. Archer Fabrications

    POS Carbon Creations hood

    They mean dont rely on the hood latch alone. It’s still good to have if you park the car and dont want people to have access to opening the hood, there are key’d versions of aerocatch but for those that arent using keys the oem hood latch adds extra security, not good for relying on keeping the...
  3. Archer Fabrications

    POS Carbon Creations hood

    I have a writeup on here look up “aerocatch install”
  4. Archer Fabrications

    POS Carbon Creations hood

    Didn’t know they even had a steel option, however, what is your reasoning? I have never had an issue with aluminum fatigue...
  5. Archer Fabrications

    Street Build Junkyard GST

    It’s not an avengers A LOL it’s an AF with a bow and arrow :) limited to what I can say at the moment due to vendor status but appreciate all of you here! And will be back when the time is right
  6. Archer Fabrications

    Street Build Junkyard GST

    I’m always keeping an eye on things
  7. Archer Fabrications

    Fp zero vs hx40

    Hx40 smoking, you have which drain? And did you use silicone anywhere on it? (Hope not) you could always just swap housings (and manifolds) on it and keep it running. Heat probably not an issue even with blanketing. Definitely gotta be something else. Ambient temps have absolutely nothing to do...
  8. Archer Fabrications

    Fp zero vs hx40

    I somewhat agree with this, however having room to grow is nice. Ive ran a bolt on hx40 in the .55 housing on mu 2g and maxed out pump gas around 28psi. At 21psi on that small housing I made 400whp on english racings dynojet.there are definately turbos that will spool quicker and still make...
  9. Archer Fabrications

    Fp zero vs hx40

    The zero is basically a 3586HTZwith a slightly different turbine wheel. So if you are looking for comparison. Look to that turbo. Plenty of results and even compairisons to an hx40. The zero will make more power as it’s a 62mm vs a 60mm.the zero also is rated for 78lbs per min, meaning capable...
  10. Archer Fabrications

    FP 68HTA or FP RED

    I run a ballbearing red on my stock block evo, 36psi and it hauls. It also uses a UHF Turbine which isnt yet released (may or may not come to dsm platform)I vote red, and yes it can still kill your trans haha. to help that a little I have staged my boost for torque to come on little later but...
  11. Archer Fabrications

    *NEW PRODUCT* AF 2G Spare Tire well delete panels!

    Dont cut the lower Mounting tabs for the bumper
  12. Archer Fabrications

    *OFFICIAL* Phoenix Area DSMer Intro Thread

    Who are the scottsdale guys? After I fix a balance shaft belt youll see this rollin around again
  13. Archer Fabrications

    2G 2.0 Long rod, & +625 worth the $?

    They are great rods I think for higher RPM and piece of mind the 625+ bolts are worth it, but unfortunately I never got the motor finished, I parted out the car and sold the shell. I will however be usinf these same rods (7bolt this time) for my evo 9 in the future
  14. Archer Fabrications

    Resolved Water dribble sound while boost leak testing!

    Gotta include all the crucial, even sometimes Obvious details that we On the fourms have no way of seeing ;) glad you got it sorted!
  15. Archer Fabrications

    Resolved Water dribble sound while boost leak testing!

    I wouod boost leak test from your lower ic piping or the inlet of your intercooler, avoids pressurizing the turbo, but still gets all the air into the rest of the system. As long as you know your turbo doesnt leak air from the snap ring side of the compressor housing (common on holsets for instance)
  16. Archer Fabrications

    Your most recent welding pics

    Dialed in HARD! I’ll contribute too, since I always forget about this thread til I get a notification from it lol!
  17. Archer Fabrications

    RTM Racing - new (here) vendor

    I got all my DG koni parts and bunch other stuff over the years from you when I lived up in oakville! Welcome back ziggy!
  18. Archer Fabrications

    2G VIS Invader Hood - where to buy?

    Thats what most carbon hoods go for......
  19. Archer Fabrications

    *OFFICIAL* Phoenix Area DSMer Intro Thread

    Thats what I’m talkin about!!!!
  20. Archer Fabrications

    *OFFICIAL* Phoenix Area DSMer Intro Thread

    I’d love to see how your car is doin if you bringing it!
  21. Archer Fabrications

    *OFFICIAL* Phoenix Area DSMer Intro Thread

    Yes.....just get your car back asap
  22. Archer Fabrications

    *OFFICIAL* Phoenix Area DSMer Intro Thread

    Hahahaha was just gonna ask this
  23. Archer Fabrications

    ECMlink ECMlink v4?

    You all just gotta get on AEM infinity... LOL I love ecmlink and planned to use it in my evo until I realized ecmlink didn’t support VVC and doesnt work with a 9 harness LOLhowever after using infinity for a few months now..... hands down million times better, inputs, hardware, software...
  24. Archer Fabrications

    Thread to end all misinformation of EBC plumbing

    Sorry had this in the wrong section not allowing replies, got some DM’s and asked @Ludachris to move this to the appropriate place. Thanks
  25. Archer Fabrications

    Thread to end all misinformation of EBC plumbing

    Hey all. I’m installing an EBC on my evo, coming from a MBC my whole time using turbo cars. and I am reading a ton of different information on evo fourms, here, ecmlink, and other turbo tech fourms.I want to make this thread to come up with a general consensus on how the boost plumbing should...
  26. Archer Fabrications

    ECMlink 2G Idle issues after converting from MAF to SD

    (Without actually looking at your log) You most likely need to adjust the VE in the idle area, track datalog and see if the cells it’s using have a wide variance, if so make them closer together which ever direction your afr target likes
  27. Archer Fabrications

    RIP Curt Brown

    2020 strikes again... RIP Curt...the guy that hit him sounds like he was pretty f’d up
  28. Archer Fabrications

    how to set fuel pressure with an afpr

    Thats what we are arguing lol
  29. Archer Fabrications

    how to set fuel pressure with an afpr

    We tested it and got different readings.If what you are saying was true, the readings would have yeilded the same base pressure regardless if the car was on or off, we are talking about base pressures..... and they dont match. The point of the FPR’s VAC SOURCE is what allows the dynamic...
  30. Archer Fabrications

    how to set fuel pressure with an afpr

    Buddy of mine was looking at this thread and I have to correct this, car has to be up to temp, and running to set a proper base fuel pressure, with the car off, the injectors are not pulsing which would subtract pressure that you are not accounting for If you simply activate fuel pump via link...
  31. Archer Fabrications

    2G Fuel line type under car

    I’m using and have also in the past used regular e85 safe vibrant nylon braided with no issues.
  32. Archer Fabrications

    Race seat for big guy

    That was a long time ago unfortunately I can’t make those anymore
  33. Archer Fabrications

    AF Evo 9 MR

    White is right! Thank you!
  34. Archer Fabrications

    *NEW PRODUCT* AF 2G Spare Tire well delete panels!

    Not sure bout that one, I’m no longer a vendor on here so I’m not sure if under the rules I can answer these questions here, feel free to DM me for any questions
  35. Archer Fabrications

    No More E85 in Arizona

    We need to start a petition to brung back e85, there is one station in mesa. The law is for a MINIMUM not a maximum. Also, if they ste claiming e54 is thr minimuk for flex, why is my station pumping 51% lol
  36. Archer Fabrications

    Your most recent welding pics

    Got some titanium in on my car recently! I use the ceramic BBW for most everything.
  37. Archer Fabrications

    AF Evo 9 MR

    New stuff happening on my evo! Fp red UHF ballbearing, AF billet series, and lots of titanium!
  38. Archer Fabrications

    *OFFICIAL* Phoenix Area DSMer Intro Thread

    Welcome! Im in north scottsdale if you need anything let me know!
  39. Archer Fabrications

    AF Evo 9 MR

    Just got some new turbo goodness for the Evo! New Forced Performance Red With UHF turbine which will be mounted to an AF Billet Series Manifold! This is the First UHF red out right now, anxious to see how it performs!
  40. Archer Fabrications

    AF Evo 9 MR

    No I’m not really a fan of those, they didn’t come on mine from the factory so I’ll leave em off It also hardly rains in arizona
  41. Archer Fabrications

    AF Evo 9 MR

    Hey everyone! I’m going to start this build thread for my Evo, little back story of how we got here. As some of you know I used to have a monarch green 99 GSX it ran a best of 11.1 at 133mph on an HX40 at 40psi, and later had a setup changed to a 6466 at 40psi, the car was running great, tuned...
  42. Archer Fabrications

    *NEW PRODUCT* AF 2G Spare Tire well delete panels!

    These are now readily available for ordering off the website at anytime! https://archerfabrications.com/af-2g-dsm-spare-tire-well-delete-panel.html
  43. Archer Fabrications

    1G AEM Series 2 Coax Connector: RESOLVED!

    This is a good video with some comparisons of infinity and v2 infinity hardware is light years ahead
  44. Archer Fabrications

    1G AEM Series 2 Coax Connector: RESOLVED!

    An Evo 8 harness should work in a dsm, May possibly need a couple wires changed around, people use evo 8 ecu’s in dsms all the time. yes 506 or 508 if you plan to only have hi Z injectors and want the option of 8. 506 runs 4-6 injectors and supports hi and low Z injectorthe infinity is way...
  45. Archer Fabrications

    Need help troubleshooting GVR-4 issues

    I’m active! If you need anything let me know!
  46. Archer Fabrications

    Brought in 5 new cars with TONS of parts!

    How much for the evo 5 speed, and what color is the evo?
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Feal Suspension Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com OHM Racing Raven Fabrication RixRacing RockAuto RTM Racing SouthBay Fuel Injectors STM Tuned VR Speed Factory
Top