The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners

  • Join the Community!

    DSMtuners is a massive archive of DSM information - but more importantly, it's a COMMUNITY! Join in and participate with other DSMers, and invite all of your DSM friends to make this place their home. Chat with others, create a build thread, post questions and answers. Get involved! Logging in will also remove many of the advertisements, along with this notice. ;)

Please Support ExtremePSI
Please Support Feal Suspension

Search results

  1. MindBlowin03

    GMB water pumps?

    Not that the Mitsubishi parts champion of the world needs me to confirm anything for him but I will anyways.I have both the NTN and Koyo idler and tensioner pulleys in their respective boxes and they are a 100% match to the OEM pulleys in the Mitsu boxes.Also, the Aisin water pump 'trick'...
  2. MindBlowin03

    OEM Coolant Overflow Alternative

    Good idea. Looks factory too.
  3. MindBlowin03

    2G Balance Shaft Removal- Plug

    I always use the oem part on that. I had a freeze plug version fall out after 10k miles, even with JB Weld in there.
  4. MindBlowin03

    Door Jam LSD sticker

    There's a guy on Facebook that makes them. I bought one myself. I'm sorry but I don't remember his name. I'm sure you can search for it on there though.
  5. MindBlowin03

    1G OFH?

    That's pretty awesome. I've ordered from them a couple times. Takes forever to get but they have come thru on rare and discontinued parts for me.
  6. MindBlowin03

    2G ***NEW PRODUCT*** Quaife rack and pinion AKA Quickrack, W/Optional EPS kits (CLOSED)

    How hard is it to turn at parking lot speeds? I'm imagining two hands for sure?
  7. MindBlowin03

    1G OFH?

    Do you have any images of one? I tried searching the part number but nothing comes up.
  8. MindBlowin03

    2G ***NEW PRODUCT*** Quaife rack and pinion AKA Quickrack, W/Optional EPS kits (CLOSED)

    Got mine today. Finally, the wait is over.Not very happy about the powdercoating. Two very large bubbles that are basically ready to fall off. I almost don't even care at this point but pretty disappointed to say the least.
  9. MindBlowin03

    2G ***NEW PRODUCT*** Quaife rack and pinion AKA Quickrack, W/Optional EPS kits (CLOSED)

    Mine finally updated as well. Supposed to be here tomorrow.
  10. MindBlowin03

    2G ***NEW PRODUCT*** Quaife rack and pinion AKA Quickrack, W/Optional EPS kits (CLOSED)

    Anyone with a powdercoated rack heard anything back lately? Been nearly 3 weeks and no replies to email.
  11. MindBlowin03

    2G ***NEW PRODUCT*** Quaife rack and pinion AKA Quickrack, W/Optional EPS kits (CLOSED)

    I opted for the powdercoated finish so I won't have mine for another week or two. Definitely ordering new inner and outer tie rods and boots for it as well.
  12. MindBlowin03

    2G ***NEW PRODUCT*** Quaife rack and pinion AKA Quickrack, W/Optional EPS kits (CLOSED)

    My tracking hasn't even updated yet. I would assume mine is on the truck already. This sucks.
  13. MindBlowin03

    OEM T-Case Yoke Recall Kits Available

    As JNZ has stated, if these are from Chrysler they are not getting the deal they would from Mitsubishi. Just a thought.
  14. MindBlowin03

    2G Evo 9 oil filter housing

    You can run a 90 turbo housing if you want external cooling. You can run a 90-92 non turbo if you don't want any cooler. You can run the forward facing if you don't want any cooler and want done extra room for a downpipe.
  15. MindBlowin03

    2G ***NEW PRODUCT*** Quaife rack and pinion AKA Quickrack, W/Optional EPS kits (CLOSED)

    Paid mine last week and got a tracking number but it hasn't shipped yet. The anticipation is killing me.
  16. MindBlowin03

    2G ***NEW PRODUCT*** Quaife rack and pinion AKA Quickrack, W/Optional EPS kits (CLOSED)

    Got the email this morning. It's requesting to pay via QuickBooks. Is that what you guys are doing? O emailed back about using PayPal but haven't heard back.
  17. MindBlowin03

    2G Blue leather interior gsx for sale on facebook

    Had a friend bask in the day with a 95 and the blue tone interior. Only one I've ever seen in 20 years of DSMs.
  18. MindBlowin03

    Mishimoto radiator OEM fans

    Does the factory fan and shroud fit pretty snug against the radiator?
  19. MindBlowin03

    Resolved Knock sensor connector bracket part number

    Looking at the parts manual I don't see a bracket for the 2Gb models, only the 2Ga.
  20. MindBlowin03

    *** (CLOSED) NEW ITEM, 2G oem billet Anti roll bar brackets ***

    Stupid question, these will offer more support and rigidity than the OEM brackets?
  21. MindBlowin03

    2G Walbro 450 with 2g awd

    Don't think I've ever been to Pocono. Not with my car anyways.
  22. MindBlowin03

    2G Walbro 450 with 2g awd

    Yes. The 450/525 only have a barb fitting on top so the o-ring is insufficient. You can try to use two of them or the EVO o-ring and hope for the best, but it's not the right way.
  23. MindBlowin03

    2G Walbro 450 with 2g awd

    Here are a few pictures from my install.
  24. MindBlowin03

    2G Walbro 450 with 2g awd

    The problem with the 450/525 pump in a 2G AWD is at higher pressure levels the o-ring setup leaks. You will only see this while logging fuel pressure or will notice your VE being whacked out at higher RPMs(trying to add more fuel but it's just not happening because it's leaking). The correct way...
  25. MindBlowin03

    2G ***NEW PRODUCT*** Quaife rack and pinion AKA Quickrack, W/Optional EPS kits (CLOSED)

    Looks pretty easy to turn too. I'll assume your car is on the ground with good tires?
  26. MindBlowin03

    ECMlink Tuning for wideband in rear o2?

    Unless you are using as a narrowband as well, there is no adjustment.A few years ago I went from the rear location to the front and did not notice a difference at all.
  27. MindBlowin03

    In the market for street/drag tires

    I run Bridgestone Potenza RE-71r in 235/45/17. The traction and contact patch is amazing but the sidewall is very stiff. Not ideal for our drivetrain but they hook, that's for sure.
  28. MindBlowin03

    2G brake kit

    CTS-V on the front and EVO 8/9 on the back.
  29. MindBlowin03

    2G Motorsports Engine Wiring Harness

    Very very cool. I'll be watching this.
  30. MindBlowin03

    Evo 3 1st and 5th gears.

    I have the evo 3 1st in my trans now and a brand new one on the shelf just in case. Could have gotten the 5th but didn't care to.
  31. MindBlowin03

    ***** NEW PRODUCT ***** 2G, 4 point front under brace / subframe brace *****CLOSED*****

    Ok a side note, I'd LOVE to see a front strut bar that is braced to the firewall for added support.
  32. MindBlowin03

    ***** NEW PRODUCT ***** 2G, 4 point front under brace / subframe brace *****CLOSED*****

    How low do these sit? I imagine a couple inches lower than the exhaust?
  33. MindBlowin03

    2G 2GB Eclipse Lower Splash Shield

    No such part. This is an actual screenshot of the Mitsubishi parts program.
  34. MindBlowin03

    RVR Hypersport Engine

    I had the same turbo. It's an EVO 16G with a down firing compressor housing. I had Justin upgrade the compressor for me as well. Very potent little turbo and it bolted right up to FMIC piping.
  35. MindBlowin03

    2G ***NEW PRODUCT*** Quaife rack and pinion AKA Quickrack, W/Optional EPS kits (CLOSED)

    Email sent as well. I think I just need to send mine in to them as I'm paid up on everything already.
  36. MindBlowin03

    Sold 2G black housing tail lights

    Been sitting in the box for probably 5 years. Never installed. $85 shipped.
  37. MindBlowin03

    Sold BOVs

    OEM crushed, OEM non crushed and eBay knock off. $50 for all.
  38. MindBlowin03

    Sold 2G aluminum door handles

    These were Tony's original handles. Brand new and never installed. $150 with the cups or $120 without.
  39. MindBlowin03

    HX-40 .70ar housing spool time

    8.5:1, HKS 272s and 60mm T3 HX40 and I see 40 psi somewhere near 5500 RPMs.
  40. MindBlowin03

    Sold Misc. parts - 1650s, Walbro, WGA, MBC, ACT, etc.

    Did a little spring cleaning and I have some things I don't mind parting ways with. Feel free to make an offer on anything.SOLD - FIC Hi-Z 1650s. Just got back from cleaning. No issues, ready to drop in and go. FULL DISCLOSURE... These only flow about 1400cc and I have no idea why. I have...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Feal Suspension Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com OHM Racing Raven Fabrication RixRacing RockAuto RTM Racing SouthBay Fuel Injectors STM Tuned VR Speed Factory
Top