This is the seller I bought my weighted shift knob,came in Mitsubishi package and Weighs exactly 14 ounces it is the real 99 gsx weighted shift knob.Infiniti Weighted Leather Shift Knob Infiniti j30 i30 i35 m30 5-Speed 10x1.25 | eBay
i use safty wire you can get it from eastwood and i also use the little rubber plugs that you can plug the threaded holes to keep powder out,i usally try to hang whre through a bolt hole and it hides the mark and then i ground my clip to that wire.
i use class bead and 80grit media.
prep is everything when it comes to powdercoating,preheating the oven is a very good practice to do.
i also have the eastwood gun and get all my powders from them,i use my house oven since it does not get used.i also sandblast everything before i coat them.also did my fuel rail...
20g's are fun and can make plenty power,i made 350 on 18 pounds:)
but plan on going bigger whenever i go 6 bolt.
the shop is awsome,we will have to meet up sometime man,love the build and where its going,keep up the good work.
Thanks man,it's a 20 ported and clipped,for sure everyone likes running the evo maffs,I love Sd though very easy to tune and adjust your vc tables.that sucks to here ,he had a nice setup,there was a black 2g auto the broke down just a couple yards down the road lol you could see it from the...
Hey man love your 1g ,I saw it out at GCA this past weekend ,I drove my black awd. Swapped 2g out there.love the cop setup,also heard Mohammed broke down on the way the meet lol?? Jacob ( the local dsm twins in p cola)Untitled by Josh865214, on Flickr.
If anyone needs pictures of a specific part or item let me know I have tons.
Also for the guys having problems with the fuel pump rewire,I would double check it because I and my brother used the write up on this thread to rewire his and had no problems and everything worked the way it should...
Well finished our awd swap,no problems yet,feels awesome having traction.
Thank you guys for all the help much appreciated:)Untitled by Josh865214, on FlickrUntitled by Josh865214, on FlickrUntitled by Josh865214, on FlickrUntitled by Josh865214, on FlickrUntitled by Josh865214, on Flickr
Im using the 2g oem weighted lether shift knob it's awesome,and only cost 20$.
I bought it off eBay a while back I thought it's was going be a eBay fake but came straight from Mitsubishi.Untitled by Josh865214, on FlickrUntitled by Josh865214, on Flickr
I didn't notice I said drivers side sorry, it is the right side (passenger side)that is making the noise. yes I used redline all the way around .Everything is topped off with nothing leaking.all the suspension is on and torqued,the only thing that is not on are the rotors and brakes .nothing...
No msd,I'm sure it's something simple just have to look into it more,also has anyone had the same experience I'm having with the driverside axel or trannie makeing a soundalike your stalling out in higher gears while one jack stands?i explained what its doing in a previous post,thanks guys for...
Vss? Also when I put it into 4th and 5th gear it sounds like the right cv axle is making a chatting noise like its stalling out,would that be do to the car being on stands and not having the speed/momentum while in higher gears? Also I ment to say its the rpm that is acting funkey and...
It was already m/t ,so the part number for the awd and fwd gear are the same,I'm stumped on why it's acting funny ,i went thought the gears and everything's butter no binding,grinding ect.i know I lost my tune because my battery went dead and im still v 2.
Well at first I had the back rotors and brakes on but the rotors were warped so I pulled them off.the ebrake may need adjustments.its the same gear I had it in before and it worked fine,my car is a 95 and all the parts came off a 95.everything matches with the Fannie and splines ect.But I...
Need opinions ,so I just started the car up just after finishing the swap,it's still on jack stands though.but when I give it gas it bogs and the speedometer doesn't hardly go up then it reads as far as it can ?could be the speed sensor causing this? I'll post a vid here in a few,thanks in advance.
Wanna be a Straight up G? Do the followingTools
-Heat torch (stove works just as good)
-Bolt cutters (or something to trim the key)
-Favorite stubby screw driver (or flat head doesn't matter)
-Have the key your using copied with a duplicateUntitled by Josh865214...
Untitled by Josh865214, on Flickr.
Untitled by Josh865214, on
Untitled by Josh865214, on FlickrFlickrJosh865214, on Flickr
Untitled by Josh865214, on FlickrJosh865214, on FlickrRemove the old brackets pictured above,drop...
on the fuel lines theres two that come from the bay,one is from the fuel filter and the other commng off my fuel reg.i need to know which one goes to the gas tank and which one goes to the safety valve on the gastank?
thanksnvm figured it outi need help figuring out what...
Yes you could do that but be prepared to spend ALOT of time on it. You would have to depinn every wire that you will not be using. I recall looking at a post about it but cannot think of the name.:hmm:
Hopefully this will help out a lot of you who are attempting fuse box relocation, pointers and corrections are welcome.Also if youre relocating 1g fuse box it is the same concept but some things may vary.Here is how I and my brother (dirty dsm) relocated his fuse box
The 2g harness has 38...