The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

  • Join the Community!

    DSMtuners is a massive archive of DSM information - but more importantly, it's a COMMUNITY! Join in and participate with other DSMers, and invite all of your DSM friends to make this place their home. Chat with others, create a build thread, post questions and answers. Get involved! Logging in will also remove many of the advertisements, along with this notice. ;) It will also allow you to view images in threads.

Please Support STM Tuned
Please Support ExtremePSI

Search results

  1. LASER4G63T

    Timing Belt Aftermath

    I tried looking around and haven't found much in terms of my specific questions.My tensioner pulley blew its bearings at 70 mph on the highway. The timing belt burned up. I've taken the belt, and pulley off and also did a leak down test and I could blow through the spark plug holes (valves...
  2. LASER4G63T

    MAS Help

    Thanks for the input guys.
  3. LASER4G63T

    MAS Help

    Ok it's fixed:I found another MAS and stuck it on (with lower and upper honeycomb) and no more problems.Now I need to go get a gm maft:thumb:thanks for all the help.
  4. LASER4G63T

    UNCOMMON continual idle problems

    Yup! That's what number 2 on my list was. BLT-boost leak test
  5. LASER4G63T

    UNCOMMON continual idle problems

    1-exhaust leaks 2-BLT 3-BISS 4-ISC . . ..yes do the normal.If all that checks out, I'd look at fuel delivery.
  6. LASER4G63T

    New Valve Cover - Leaking oil Cap

    I had a problem with my oil cap coming loose/leaking and the PCV checked out.I bought three new oil caps from auto zone because they kept coming loose. I finally broke down and bought one from the dealer and it is 10000000000087664 times better. Definitely worth the 20 bucks.If you...
  7. LASER4G63T

    MAS Help

    thanks!
  8. LASER4G63T

    MAS Help

    FULL THROTTLE SPEED - Item Description PageThe link didn't work. Wow, that's a long list.
  9. LASER4G63T

    wandering idle

    Ok...another update. Check out this thread:http://www.dsmtuners.com/forums/bolt-tech/310087-mas-help.html#post151626803
  10. LASER4G63T

    MAS Help

    okie dokie...so this would explain why i have been getting 27.2 mpg for over a year and nobody else gets that? lol. So theoretically:laser: if I were to get a MAS with everything intact, this would solve my problem (assuming its the honeycomb)?Also, if I were to switch to a gm maf...do I...
  11. LASER4G63T

    MAS Help

    OK, I searched on this and there is a lot of information but i don't see any straight answers. If somebody can direct me to an existing thread that I missed thanks (and sorry). BUT...I have had idle issues. I did a boost leak test, checked ICS, checked plugs, checked connections, and set the...
  12. LASER4G63T

    wandering idle

    Update:I did another boost leak test and I found:leak at dipstick (fixed) UICP leak (small, fixed) TPS (small, barely noticeable)That's all I found. The idle still does the same thing, so I looked into the ISC as suggested. I checked resistance between posts and they were all...
  13. LASER4G63T

    1G SMIC question...

    will there be any other problems? Like the LIC hitting stuff?
  14. LASER4G63T

    1G SMIC question...

    Are there any suggestions on making it work, or should I just get a '90 IC?
  15. LASER4G63T

    1G SMIC question...

    ahhhhhhhhhhhh thanks.
  16. LASER4G63T

    1G SMIC question...

    Hi all.. I just bought a 1G SMIC from a guy on here and it is different than my 1G and anything else I can see online. The brackets are slightly different and also the LIC side is shorter and at more of a steep angle..so it hits my coolant reservoir. It's the same size...just different. Did I...
  17. LASER4G63T

    wandering idle

    I replaced the capacitors a few years ago, before the board was to destructed. I'll look into the ISC thanks.
  18. LASER4G63T

    wandering idle

    I did a test and nothing at the TB seemed to be leaking nor any of the lines. The IC was hissing bad though.
  19. LASER4G63T

    wandering idle

    I'm going to run a boost leak test today..and also I'm going to make a shield for the K&N so it's not effected by fan blow. I'll let you know.
  20. LASER4G63T

    wandering idle

    I looked around at idle surge threads, but mine isn't as described in most. My idle surges between 500-850 and sometimes at stoplights it hovers on 1000. Other times it is rock solid on 750...where i have it set. the stock boost gauge also moves with the rpms (nothing on the aftermarket). I...
  21. LASER4G63T

    [RESOLVED] Unknown vacuum ports behind the intake

    OK, so right under/behind my intake manifold there are 4 'nipples' for hoses. only two of them had anything on them. Shouldn't the other two have hoses on them as well? does anybody know what these are? I've had a wandering idle for a long time and i cant figure it out.:laser:
  22. LASER4G63T

    AC Lines

    I am trying to reinstall my A/C after I took it out last year. I'm moving to Texas and would love to have it haha. I have everything but the aluminum lines. Does anybody have any idea where to buy these?? :laser:
  23. LASER4G63T

    Massachusetts people, exhausts, and your experiences and opinions

    I just got pulled over by a state cop last night for having a modified exhaust. its not even that loud.
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com Raven Fabrication RixRacing RockAuto RTM Racing STM Tuned VR Speed Factory
Top