I believe it would be best to settle down with a 95-99 Eclipse with a 4G in it. The 4G is my primary goal. And this car is just beat. It has already cost me over 2k. Thanks much!

Thanks! Is the engine and trans even good enough to hold up 500hp when rebuilt? It is over 132k miles, driven on a bad head gasket, and the trans ran with no fluid once. The inside of the piller on driver side is rusted inside down to the door jam. And the driver door had to be welded on because...

I hope to take out my 2.0 420a engine and trans and rebuild it for turbo strong enough to handle at least 500hp. I’m not sure what all to use to rebuild the whole engine (and trans if necessary). The whole car has 132,000 miles on it. Trans shifts good engine ran fine until head gasket went bad...

Hey guys. I am looking to paint up some parts soon. I cannot read my paint code sticker but I do have the vin left. I’ve been researching and seen that possibly for 95-99 eclipse’ there is only one type of silver. Mine is silver and I would like to know if Minden Silver Mica A52, AC11052 is the...

What should I gap my NGK V-Power spark plugs for my 420A 2.0 non turbo? They are resistor type plugs.

I don’t really wanna delete the egr. The vacuum hose goes from the egr solenoid to the intake manifold. I have no idea what to do with it man, my mechanic told me to get a power steering pressure sensor for the power steering code. But as far as the other two codes I have no clue.

Thanks man. I got it on successfully. The pipe from the egr to the intake manifold never got hot enough to melt any wires. But it did after the new egr valve. It melted one wire out of three to the IAC (idle air control) it ran like crap sounded like misfiring it smoked white a lot and had a...

Second picture of metal gasket. Isn’t there something else that should go on there to create a better seal?

Hey guys I got a brand new egr valve and want to put it on and I’m not too sure about it because the cashier said it is a bolt on part but the metal gasket is what makes me unsure. Take a look at the picture I added and you’ll see. It has a good gasket for the smaller port. But a metal one for...

It’s front wheel and turbo I thought the T was for turbo front wheel lol Yeah I’m definitely gonna look into it and see how much he would want for it I would be sooo happy if could get it I’d Love to work on it all the time restoring it I have a huge passion for these things

I am. Found a junker eclipse with a 4g63-T turbo been sitting for years guy left it and never came back to it gonna see how much I could get that for someday and build off that one. As of now, waiting for a mechanic to come and fix my gs just to have it for transportation now. I ain’t gonna...

Yeah they have no idea how much of a hole I’m in right now bout to lose the house and my job everything is going to crap

Yeah I took off school today to go get a new O2 sensor for the down pipe been going through hell for this car. I got a guy coming Tuesday to get it running hopefully. A picture of the harness wires going into the plug would hit the spot I got two white wires one gray and one black from the O2...

Alright thank you

It’s alright been trying my best. If you can send pictures that’d be great like of the plug and wire colors and order of both plugs to the sensor and harness gonna try it tomorrow aiming to get it by Wednesday that’s the deadline for everything pretty much. Any help would be much appreciated...

Alright guys, I am to the point where I have blown all my money I’ve put my last two checks in this car I’m gonna be fired by this coming Wednesday because of it being broke down and having no way to work. Basically it is all because of these three wires going from the wire pigtail to the...

As of now I’m trying to diagnose a major problem with the car. It does not want to start at all there’s no spark to the plugs. All the symptoms point to a bad cam positioning sensor but I don’t have the money or time to guess and buy parts. It needs to be running in the next few days. And I...

My O2 sensor wire got caught in the belt and tore all up I’m re-wiring it together just need to figure out how to do all of the 4 wires right. I got 4 wires running from the O2 sensor a grey one, black one, and two white ones. As for the plug that it goes into, it has a black and red wire, green...

Yeah we got it now I found that the o2 sensor plug got caught in the belt and got chewed up. Is that why the throttle is so messed up and don’t wanna keep started?

No. Right now I’m trying to find a vacuum line that fell off in the bay behind the engine. It goes on where my finger is. Do you know where it runs too or any tips?

Yeah as of right now the throttle body gasket is off and I have a bad plug to the throttle positioning sensor. I’m gonna be putting the gasket on soon and the plug later since autozone has to freaking order everything in.

Alright I’ll look. I put new plugs and wires on it yesterday and the throttle is still really acting up doesn’t wanna stay running.

I took off three lines on the upper intake manifold. All the three lines were right together going outward separate ways but I can’t find the third one in the middle of them all. I have no idea what kind of line it is or what but all I know is where it’s off at sucks in a lot of air. If I could...

Yeah just looking for stock injectors for now, I’m putting in new plugs and wires tomorrow the car was really messing up one night

Alright I’ll try it thanks should I get a set of injectors on eBay for about 50$? Or have autozone order in a set for about 100$?

Where would I pull off the fuel pump harness at?

Alright I’ll use that. And uh how would I properly depressurize the fuel rail or whatever it is that needs depressurized so I don’t lose a lot of fuel?

Lol yeah

Okay thanks man

Would the injectors screw in or just snug in?

Alright thanks. And will fuel continuously pour out?

I need to know how to replace the fuel injectors on the 420A non-turbo

Alright thanks man I’ll check when I get paid this Thursday

Would my local autozone have one do you think? Or Napa?

Oh god how would I adjust it if I ended up having to?

Ahh that sounds so nice I would feel complete with all that. For now I’m gonna need a lot of help putting these injectors in right and throttle positioning sensor

Alright. I’ll probably be back Thursday on here I’m getting all the parts then. The reason I’m taking off the upper and lower manifold is because it had oil in it and I wanna clean it all out and put new fuel injectors in the other night it kept shutting off running like shti and wouldn’t wanna...

It was passed down to me from my father and it is in pretty good condition besides the issues now but I have plans to restore it and personalize it and make it a street tuner (turbo, exhaust, suspension, etc...)

I want to replace my upper and lower intake manifold gaskets as I am cleaning them out and re-doing fuel injectors and need the whole intake manifold off anyhow to get the injectors out easily and put new ones in. -What exactly should I get for fuel injectors for a 420A non-turbo? -What...

All I have left to hook up is the two red wires from the new halo headlights I don’t know what to do with them could someone help

Mr Ortiz submitted a new DSM Profile :98EclipseGsRead more about this vehicle here...