Biglady112 can you help me tune my 2g? I'm in Denver and from what I'm reading your the guy that knows his stuff!!

Thank you guys I appreciate the help I ended up finding a guy who was parting out his car on here and he's got one on its way.

There is no link to the one on ebay can you link the Web a addres so I can click on it

Nice! Thank you where do you get part numbers like that

Thank you! I defenently lost that bracket know anywhere I could get one

Please?:cry::idontknow:

I was wondering if anyone could please take some pictures of how the stock coolant overflow is supposed to be mounted it's been years since I have taken it off and think I'm missing something . Thanks

Thank you for your help just ordered it.

Perfect that's what I thought great explination. If I get a new one from the vendors will it come with wires that I can just splice to the two wires?

I know there are a few posts on this topic and I apologize, but my question wasent exatly answered. Both of these sensors on my thermostat housing got the wires pulled out, I fixed one but need to buy the other one. I found out the one I fixed is the one that sends the temp to my dash. What does...

720-891-1624

So I'm in westminster and I am in need of some help. I am finishing up my build and I need some help on the final steps to get her started. It has been two years since I tore it apart and now I am having trouble gettong it started. My fuel pump wont turn on and I'm not sure if there is somthing...

has anyone run with this setup?

do you still have the s90 tb?

I am curious how your decision ended up? Did you dyno with that tb? I am at the same point in my build and have a magnus intake already flanged for 75mm but also have a 1g tb laying around should i just rebuild it and run it? I can go and get the adapter but like snowboarder714 said more area...

been doing some research and have found that the 1g throttle body is what im going to use on my magnus intake since i have one laying around. I am wondering who on here has run this setup, what you think compared to a bigger throttl body,andsee if with the adapter palate 75mm to stock if anyone...

great news! I look forward to seeing what you do on the wire tuck I am trying to start mine as well.

I too am rebuilding my build with the hx 40 what are your plans?

perfect thanks guys!

oh okay well i am no wiesman by all means lol just doing what i can to learn so how do i adjust the clutch

well than thats what ill do right away i didnt realize that. Its so weird why is it only 3rd? All other gears are butter

thank you both i didnt even think at all my slave cylinder in my clutch is leaking pretty bad so it sometimes when it gets low grabs really low from the floor. i will flush it and use that gear oil hopfully i get somewhere. i didnt want to tear it appart lol

so i got the evo 2-3 gears in my 2g tranny that i got fromew jacks transmisons and when im on it and shift fast int third sometimes it will no go in i have to try multiple times till it slips in? Any ideas why this keeps happening?

do you have any pics ?

i just seen someone on craigslist selling a stroker crank and stroker pistons for dirt cheap but im looking for a little bit more agressive for the head build but thanks anyways

im just testing the waters here to see if anything is out there, its time to build my 2g head so im looking for a head thats already built or good condition parts tobuild mine im looking for something along the lines of this, 272 cams any brand, kiggly beehive springs 1 mm valves with guids...

what condition is the aluminum radiator in

thats sounding like a nicley done build close to what i did to mine execpt im building my head now good luck hitting your numners!!

i had the same problem you gotta count the teeth they have different t cases for each year make sure you have the correct t case

I have a guy who does great body work and great pait for real cheap, he owns 1609 motorsports give him a ring at 303-881-9967 his name is zach

I need to do some head work man I wanna go!!

Perfect thank you

So I got a 2g transfer case for my 1996 assuming it was a 1995-1996 model and I still think it might be but when I turn corners and hit a bumb the rear end will fish tais,l I got all my suspension looked at struts that's all fine so if it is a 97-98 transfer case with a diff gear ratio will that...

Just a question what's a good number for Lucas over at carz?

oh, okay well thanks man ill take your advice

so i found a cometic head gasket mls on extreampsi so is this good?

oh really okay cool is the compsite head gasket multi layer

that will work if its .02 bored over i herd local shops have just standerd bore gaskets

so on my bulid i have 85.5 mm pistons and .02 bore what is a good head gasket i need and where do i find it? im looking to order it as soon as possible so the thanks for the help

Hey I'm in the same spot as you when you first posted this I'm out in co how did the shop u went with do and how much

8:5:1 is for a smaller turbo set up and 9:0:1 is for high rev to spool a bigger turbo so iv been told

Right on thanks

Thanks guys ya I decided to get the rods and pistons because I'm gonna keep building down the road so I thought since its out might as well do it now. What does the machine shop usually coast for everything

So I'm rebuilding my 1g 6 bolt right now and am running out of money so I wanna get everything I can for the bottom end while the motors out and than do the head stuff later on when more money comes and when the motor iS already in. I want the motor to be around 400hp when I'm done. So far for...

Oh ya iv herd that's a good piston/rod set up but would it be an issue with my 6 bolt?

What do you mean by its going to be a over kill for my goal?

Just 350 HP all together hopefully more. And should I do anything to the crank than?

So I got a 92 engine with a hundred miles for my 96 and wanna build it to another 350 HP with out stroking it so I'm going to knife my crank and go with the eagle rods, do I need to worry about the right size to look for? Than I'm gonna go with the wiesco pistons 85.5mm anything that I should...

Oh nice thanks for saving me the the pain. So what rods do I need the h beam or I beam ?

Oh ok for sure ya the one on dsm grave yard is like 350 so I'm gonna jump on that