The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Rix Racing
Please Support Fuel Injector Clinic

Search results for query: *

  1. lifter replacement (valve tick fix)

    I am fixing my valve tix by taking out the lifters or the auto valve lash adjusters. I have the valves cover off, the engine is at top dead center and I am on 3# cylinder. I got instructions off the net, now with either a tool or a standard screw driver press down on the valve and remove the...
  2. Intercooler Pipe sprayer

    Alright I know the benifits of spraying nitrous into the engine will far out way cooling the intercooler, but what if you are doing some autoxing and want to chill the intercooler just before a race. You can buy paint ball gun co2 tanks from many places pretty cheap, they have a npt fitting on...
  3. Water Injection vs. CO2 Intercooler Sprayer - Pros/Cons

    Alright I know the benifits of spraying nitrous into the engine will far out way cooling the intercooler, but what if you are doing some autoxing and want to chill the intercooler just before a race. You can buy paint ball gun co2 tanks from many places pretty cheap, they have a npt fitting on...
  4. I/C sprayer???

    Alright I know the benifits of spraying nitrous into the engine will far out way cooling the intercooler, but what if you are doing some autoxing and want to chill the intercooler just before a race. You can buy paint ball gun co2 tanks from many places pretty cheap, they have a npt fitting on...
  5. Cheap IC Sprayer?

    Alright I know the benifits of spraying nitrous into the engine will far out way cooling the intercooler, but what if you are doing some autoxing and want to chill the intercooler just before a race. You can buy paint ball gun co2 tanks from many places pretty cheap, they have a npt fitting on...
  6. just got the intercooler sprayer!!!!!!!!!!

    Alright I know the benifits of spraying nitrous into the engine will far out way cooling the intercooler, but what if you are doing some autoxing and want to chill the intercooler just before a race. You can buy paint ball gun co2 tanks from many places pretty cheap, they have a npt fitting on...
  7. Lots of intercooler sprayer threads heres a new one!

    Alright I know the benifits of spraying nitrous into the engine will far out way cooling the intercooler, but what if you are doing some autoxing and want to chill the intercooler just before a race. You can buy paint ball gun co2 tanks from many places pretty cheap, they have a npt fitting on...
  8. Intercooler sprayer NOZZLE question

    Alright I know the benifits of spraying nitrous into the engine will far out way cooling the intercooler, but what if you are doing some autoxing and want to chill the intercooler just before a race. You can buy paint ball gun co2 tanks from many places pretty cheap, they have a npt fitting on...
  9. co2 sprayer location

    Alright I know the benifits of spraying nitrous into the engine will far out way cooling the intercooler, but what if you are doing some autoxing and want to chill the intercooler just before a race. You can buy paint ball gun co2 tanks from many places pretty cheap, they have a npt fitting on...
  10. Co2 Sprayer

    Alright I know the benifits of spraying nitrous into the engine will far out way cooling the intercooler, but what if you are doing some autoxing and want to chill the intercooler just before a race. You can buy paint ball gun co2 tanks from many places pretty cheap, they have a npt fitting on...
  11. 20g, stock smic, co2 sprayer

    Alright I know the benifits of spraying nitrous into the engine will far out way cooling the intercooler, but what if you are doing some autoxing and want to chill the intercooler just before a race. You can buy paint ball gun co2 tanks from many places pretty cheap, they have a npt fitting on...
  12. How to made co2 Sprayer?

    Alright I know the benifits of spraying nitrous into the engine will far out way cooling the intercooler, but what if you are doing some autoxing and want to chill the intercooler just before a race. You can buy paint ball gun co2 tanks from many places pretty cheap, they have a npt fitting on...
  13. Intercooler sprayer

    Alright I know the benifits of spraying nitrous into the engine will far out way cooling the intercooler, but what if you are doing some autoxing and want to chill the intercooler just before a race. You can buy paint ball gun co2 tanks from many places pretty cheap, they have a npt fitting on...
  14. CO2 Sprayer

    Alright I know the benifits of spraying nitrous into the engine will far out way cooling the intercooler, but what if you are doing some autoxing and want to chill the intercooler just before a race. You can buy paint ball gun co2 tanks from many places pretty cheap, they have a npt fitting on...
  15. Cheap intercooler sprayer Idea

    Alright I know the benifits of spraying nitrous into the engine will far out way cooling the intercooler, but what if you are doing some autoxing and want to chill the intercooler just before a race. You can buy paint ball gun co2 tanks from many places pretty cheap, they have a npt fitting on...
  16. fipk or universal filter

    does the universal filter mount on our cars or do I have to get a fipk.
  17. fipk or universal filter

  18. see my shiny valve covers

  19. Early 95 computer

  20. Getting new tires??

  21. Dropping That Trans

  22. supporting the engine???

  23. Mazda RX7 VS. GST Eclipse

    remember not every car is in tip top condition, mad cars were "fast" but not any more, once the apex seals start going on the rx7 they slow down alot. My car has 125 K and doesn't feel as responsive as my friends new motor in his gsx.
  24. car took forever to start, and then it was weird

    This morning my car took forever to start, I kept cranking all, then decieded I've probably flooded it, so I went inside for a few minutes. I came back out and tryed it again, it barelly started, really really rough, idle was bad, I gave it some gass, and slowly it smoothed out. it starts fine...
  25. turbo conversion on a sonata?

    r u kidding me???
  26. want to put new radiator support in, how?

    I want to buy a whole new radiator support mine was damaged, how could I do this, does it just bolt on to the frame or rivieted or welded??
  27. Tools needed for head and TB swap?

    if you have to ask you probably shouldn't be doing it, but other than a "good set, or wrenchs and socket set" the tensior tool and a spring compressor tool would be needed. getting the engine to top dead center is fairly easy, turn the engine over till the two marks face into each other on the...
  28. cheap easy idea to improve wet kits

    ahhh, I see your point now, hmm why do I hear all about nitrous system on turbo car running rich all the time them. Forgot about the manifold pressure.
  29. Supporting motor with tranny removed

    it's usally not a good idea, I'd put a peice of woods or spare sissor jack under the oil pan with a peice of wood and some rags to spread the weight, plus putting the tranny back in requires a little muniplilation of the engine, trust me.
  30. Supporting motor with tranny removed

    it's usally not a good idea, I'd put a peice of woods or spare sissor jack under the oil pan with a peice of wood and some rags to spread the weight, plus putting the tranny back in requires a little muniplilation of the engine, trust me.
  31. Crashed my car, fix my radiator support

    it hurts to look at it
  32. Crashed my car, fix my radiator support

    it hurts to look at it
  33. Crashed my car, fix my radiator support

    I posted pics in another post, but here are new ones with bumper off, good damn broke like 10 bolts getting it off, but here they are.
  34. Crashed my car, fix my radiator support

    couldn't I just buy a new radiator support/ cradle, I haven';t pulled off the bumper still driving it, it's like 170. how does it mount to the frame, I can't find any diagrams in the chiltons.
  35. I want to remove the cruise control.

    I just did it It was easy, all you do is open up the box and disconnect the cable that goes to the little actuator, if you really wanted too you could take out both little boxs and just cut the cable short and hook it up to the throtle body, turbotrix sells the non cruise control box but you can...
  36. Okay tell me what I broke , got pics

    took the foglights out awhlie ago, a thought just occured to me, I better disconnect the batt when I wack the cradel straight hopefully or I might set off the airbags, when strangly didn't go off.
  37. Okay tell me what I broke , got pics

    cool, so I probably won't need to buy a new one right, is it welded to the frame,
  38. Okay tell me what I broke , got pics

    my radiator is not straigh with the body see that gaps on both sides.
  39. Okay tell me what I broke , got pics

    here it is
  40. Crashed my car, fix my radiator support

    well I messed up the bumper cover I know, but I bent a peice of metal, to the left of the endtank in the first picture, just above the ic pipe. What is that, cause it's bent it alonge with the bumper cover beeing smashed on that side. PLus my radiator isn't straight anymore :(
  41. busted up my front bumper need a new one

    on my 95 talon busted front bumber cover, and a headlight, want to replace with something that looks better, which is an easy fit, also cheap to find, I know the 98 ecplise is made by other companies in ABS so it is cheap to get new.Also what is bumber supports should I remove them...
  42. Crashed my car, fix my radiator support

    does this bumber like a metal u, that holds the radiator on it cause I messed that up a bit too, thinking about just banging it straight with a hammer.
  43. Crashed my car, fix my radiator support

    I slid my car into a ditch, hit rocks, here's whats wronge, front bumper, Radiator support or whatever it is, is bent in one side, sidemount, well have a MKIV supra one ready just clipped the bottom of my left head light.how can I fix the radiator support, can a buy a new one or is it on...
  44. cheap easy idea to improve wet kits

    nitrous plus a turbo, good combo right, except when the boost builds and the fuel pressure jumps up and the wet kit jets now rich.My idea I have a aftermarket regulator, on the fuel line to the solenoid mount my stock one or someting cheap that will hold the pressure at 40 psi and keep it...
  45. Twin turbo? [Merged 11-6]

    sorry I ment I wanted to go to serial turbo's (i think) but probably won't be doing in it, just cause I am building a motor, it was a wet dream but just taking another look there is not much space. Going to end up putting them on my friends camaro instead, that will be fun.
  46. Twin turbo? [Merged 11-6]

    hmmm, actually I had this idea last night, I am working on the car now, it looks pretty tight, maybe not worth it, oh well twin turbo the 350 now.
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top