The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

  • Join the Community!

    DSMtuners is a massive archive of DSM information - but more importantly, it's a COMMUNITY! Join in and participate with other DSMers, and invite all of your DSM friends to make this place their home. Chat with others, create a build thread, post questions and answers. Get involved! Logging in will also remove many of the advertisements, along with this notice. ;) It will also allow you to view images in threads.

Please Support RTM Racing
Please Support ExtremePSI

Search results

  1. MorrisonFab

    5/8" (-10) Oil Drain Kits- Garrett, EFR, Xona, PTE

    We've added DSM and Evo 5/8" turbo oil drain kits to the line-up for applications that the 3/4" kits didn't quite fit, allowing a drain kit for just about every turbo. The 3/4" kit is excellent for Borg Warner S300/400 and Holsets that require a large diameter drain to handle the oil...
  2. MorrisonFab

    Morrison Fabrications Welding Thread

    Slacking on photos but new phone cameras are fancy
  3. MorrisonFab

    MHI/FP Turbo Oil Drain Kit

    Thank you Marty!! The rest of these just fell into place after developing the 3/4" kit :)
  4. MorrisonFab

    MHI/FP Turbo Oil Drain Kit

    All of our drain kits include self sealing oil pan bolts with o-rings under the bolt heads :)
  5. MorrisonFab

    MHI/FP Turbo Oil Drain Kit

    Full flow 5/8" drain kit for 14b/16g/FP bolt-on turbos where the factory drain doesn't quite work or if you would rather slide a hose off during turbo removal instead of dealing with gaskets. Each fitting is slightly angled toward each other for an easier bend with the high temp hose and the oil...
  6. MorrisonFab

    92 Galant

    Loving the build!Happy to hear the drain line kit keeps it away from the pesky GVR4 engine mount bracket :) With both dumptubes and the drain line all sharing the same space down there it does end up fairly tight (and we mock it all up with the drain line accounted for), but is there a chance...
  7. MorrisonFab

    RWD 4G63 Manifolds

    As far as we know @oittehgaps above with his Pup and @4g63quest soon. Not sure of the screen names for others but definitely a special thing to see along side a longitudinal 4g63 :)
  8. MorrisonFab

    RWD 4G63 Manifolds

    A couple install photos from some one-off manifolds and can't wait to see more!
  9. MorrisonFab

    Xona Turbo Upgrade Recommendation (FP 3052 related)

    PM'd back!Sorry we haven't been as regular recently but thankful to be so busy with everyone's orders :)Yes, we are a dealer for FP/Xona and happy to put together some package prices with manifold/hot parts/turbo.Appreciate the mention, @Vegas Smith and love seeing your updates!
  10. MorrisonFab

    Resolved O2 housing/ Wastegate compatibility issues

    It would seem that the O2 housing and dumptube are for the larger 44mm MVR wastegate
  11. MorrisonFab

    Vanna White

    Got a tiny bit done today. Valves in, head on, cams and cam gears in and on, so that’s nice. It’s funny how you go into the day thinking you’ll get much further than you do and then BAM you’re reminded that if something can go wrong, it does
  12. MorrisonFab

    Vanna White

    Things are comin’ in to get Vanna where she needs to be!Haltech Elite 2500 + Custom Plug-n-Play Harness from Performance Partout (https://performanceecu.com/)Ferrea Competition Plus Exhaust and Intake Valves from ExtremePSIWe are hoping to take a day off (gonna be weird.. what’s a “day...
  13. MorrisonFab

    RWD 4G63 Manifolds

    Showing off some of the RWD manifolds :)We've nailed down a really nice placement that will work with most applications and architecture, and fits a wide range of turbos and flange options. Medium to large frame, V-band and T3 to divided T4.We will get them sorted out on the website but...
  14. MorrisonFab

    Steve93Talon 14B Record Build

    Nuuuuuts!!Big congrats :)
  15. MorrisonFab

    Morrison Fabrications Welding Thread

    Hope everyone had a great Thanksgiving!
  16. MorrisonFab

    Street Build 1G Build: Return of the DSMer!

    Congrats!!! Super happy for you :)
  17. MorrisonFab

    DSM Tuners stickers/decals

    Ordered a set for Vanna, too!
  18. MorrisonFab

    Vanna White

    It sorta bothers me too but for how little I’ll probably pop my hood, I’ll let my time slips do the talking ;)
  19. MorrisonFab

    Vanna White

    As always, things don’t always go according to plan.We were certain we had good valves but after spending an obscene amount of time searching- nope, we don’t.Fortunately, there was still enough to get done.We finished cleaning out the head and now it’s all good, ready to go.Got the trans...
  20. MorrisonFab

    Vanna White

    Since we couldn’t make Kevin and Katie’s event this weekend, we decided to take two days off and get some work done on my car.Pulling her out of hibernation felt really nice. I’ve been dying to get some progress made and this weekend is it!Bowl and blended the cylinder head. Got the...
  21. MorrisonFab

    Vanna White

    Thank you!!Funnily enough, after I get done, Matt tells me he has one “somewhere” but I am going to order one now for the next set because man oh man my finger has never felt so sore, lolThank you!! I was really nervous because his instructions were so.... firm and seemed kind of...
  22. MorrisonFab

    Vanna White

    Ok, so I followed this thread on how to properly paint my plastics.But oh my word, the things that weren’t mentioned are that 1.) your spray finger will ache for like days, and 2.) it takes several days for this process. Start early in the morning.I followed his instructions exactly. I...
  23. MorrisonFab

    rabenne's street car

    Really surprised that fit! Those X-lines are extremely thick. The extra space from the more compact design ended up paying off :)Hoping that cures all of the coolant/HG issues but even if it doesn't, it's really solid insurance if the HG does need to be swapped eventually.
  24. MorrisonFab

    rabenne's street car

    Did you get to compare the VE tables with the only change being the turbo setup vs the 50 trim? Curious if there was a large bump in VE during spool and midrange
  25. MorrisonFab

    rabenne's street car

    We wanted to chime in on the WG spring rating vs actual boost level running "wastegate psi" as we've seen it on a few setups now and with talking to some prominent tuners.The rated vs actual has been offset (higher) by 5-10psi on some setups, mainly newer higher flowing/more efficient turbos...
  26. MorrisonFab

    Morrison Fabrications Welding Thread

    Thank you! All pricing is on the website :)
  27. MorrisonFab

    Vanna White

    Well, we took a few hours and got some work done. I was going to paint the plastics but everything I need hasn’t come yet (2-day prime or 2-week prime? ;) )We buttoned up the bottom end, set the stretch on the rod bolts, got the case and oil pain on.I always underestimate the amount of...
  28. MorrisonFab

    For Sale Haltech platinum sport 2000

    For sale: Haltech platinum sport 2000Plug and play for a 1g.We bought it from Adam St. John a few years ago (and iirc, everything had recently been gone through by haltech when he sold it to us so it’s good to go).I’m upgrading so no longer need this. It’s never been used by us.Can...
  29. MorrisonFab

    rabenne's street car

    The flex section is almost always further forward (about at the crank centerline) and would never cause an issue- this just happened to have that oil pan and tcase brace making the flex moved back a safer bet for clearance in this case. Until that slick brace showed up :p
  30. MorrisonFab

    rabenne's street car

    Love build threads like this!!Hope it all gets sorted out soon and that's all the issue was with the coolant cap. Really damn exciting :)
  31. MorrisonFab

    Morrison Fabrications Welding Thread

    Miller syncrowave 200 (:
  32. MorrisonFab

    Morrison Fabrications Welding Thread

    An interesting one that involved a lot of welding :)Compact V-band for an Evo III with a 6466, 2.3L, and varying octane fuel so 2x TiAL 44mm wastegates were used for the most boost control possible. Getting everything to package in the confined engine bay was a challenge but we are very...
  33. MorrisonFab

    Vanna White

    I don’t remember who it was that said it but I read somewhere in Facebook land that they had good luck using stockinteriors.com so I was going to give them a shot! I’m currently waiting for the color samples :)
  34. MorrisonFab

    Street Build Junkyard GST

    Exactly :)We use an oval port exhaust flange which the runners are formed/shaped to the exhaust port rather than the much more common cnc transition flange that makes a fairly abrupt transition from oval to round but requires less tools and time. We did an article on the flange itself with...
  35. MorrisonFab

    Street Build Junkyard GST

    Thank you!If you are referring to the exhaust flange with the set screws, that is only used for mock up before the runners are shaped to the oval flange/exhaust port.Love seeing the progress, Will!!
  36. MorrisonFab

    Vanna White

    In preparation of a new cage going in once I save enough, it was removed. That felt like a good next step.Cleaning every crevice of the interior of this car was AWFUL. That metal dust got everywhere and in places I didn’t think things could go. Hours and hours with a vacuum, cleaner, and...
  37. MorrisonFab

    The Green Talon

    This car originally belonged to me from 2003-2008. I purchased it from my second cousin’s boyfriend’s mother, who was the original owner. It had next to no miles on it and she didn’t want much for the car. I already had my first red 1g but this car was for just tooling around in as that car was...
  38. MorrisonFab

    The Green Talon

    MorrisonFab submitted a new DSM Profile :The Green TalonRead more about this vehicle here...
  39. The Green Talon

    The Green Talon

  40. MorrisonFab

    Vanna White

    Remaining paint photos (:
  41. MorrisonFab

    Vanna White

    Here are a bunch of photos from when it was getting painted. And if I’m not mistaken, there’s like 3 extra coats of clear (on top of whatever is usually put on) on it!
  42. MorrisonFab

    Vanna White

    I have wanted a white 1ga since as long as I can remember.There were a few times in the early 2000s that I tried to buy one but they were either not as advertised or it sold before I could get there. It was frustrating so I just gave up with it after like the 12th letdown but they remained my...
  43. MorrisonFab

    Vanna White

    MorrisonFab submitted a new DSM Profile :Vanna WhiteRead more about this vehicle here...
  44. MorrisonFab

    Vanna White

  45. MorrisonFab

    Top Mounted Manifold Love (4g64 Starion Swap)

    Thank you for tagging us! We actually make exactly that, a top mount for a 4g swapped Conquest/Starion :)This is a divided T4 we made for a PT6766. The placement worked out really slick and can clear up to a GT42/S400 etc, but can just as easily be built for T3 or V-band as well. For the...
  46. MorrisonFab

    2G Turbo Oil Drain Line Angle

    The forward engine tilt that Justin points out is exactly why have been angling the oil pan fitting up, getting rid of the slight "uphill" section just before it goes into the oil pan to better evacuate the drain line. Just to note, our 3/4" oil drain kits are made for turbos with a 2" center to...
  47. MorrisonFab

    1G Auto gears

    It really comes down to how to manage the power off the line, when you are on the brakes and trying to build enough boost to launch. As a rule of thumb, if decent brakes can't hold the car on the line, you are making too much torque for the factory transfer gears to last.This is from...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com Raven Fabrication RixRacing RockAuto RTM Racing STM Tuned VR Speed Factory
Top