They are what do u got in mind pm me

Msr I think and first of dec

hey guys I'm moving to Michigan and can take her with me nothing special about her she does run but has a really bad knock I started to take it apart but didn't have time to finish eprom ECU just sent for recap and socket job tokico blues Hyundai valve cover t25 turbo car is complete but will...

Want to sell a 7 bolt bare long block head is good and super clean just replaced front seal and timing gears seals but I believe it spun a bearing. Want to sell asap 250.00 No sensors ,manifolds or valve cover.... will come with oil pan not in the best shape tho... text for pics 6023971920 thx...

Looking for a non bent, dented 2g oil pan any one have one sitting around they wanna sell 602 397 1920 milo

So whats up with this meet is it gonna happen?

Thanks but i got it recapped already

Does any one have one for sale that there willing to part with for cheap my baby wont pass emissions thats the only thing left to replace she running really rich please help me 602 3971920 thanks milo

Im down 602 397 1920

Ok thanks for your help

[/IMG]The other wire wrapped in tape leads to the o2 sensor

[/IMG]That wire comes out of the same section of the wire harness as the rear o2 sensor wire colors are, green with black stripe - black with yellow stripe and two black with red stripes

The plug was spliced but it is a relay that was spliced in the wires splits off of the harness next to the rear o2 plugI thought it was the mpi relay but its only a 4 wire plug

Im sorry for some reason it wont let me upload the pic but the relay I am talking about is on the drivers side coming off of therear o2 sensor harness its a 4wire plug previous owner had spliced it with a cheap relay it bugs the hell out of me ### help me im hope if i replace it will fix my...

Im sorry for some reason it wont let me upload the pic but the relay I am talking about is on the drivers side coming off of therear o2 sensor harness its a 4wire plug previous owner had spliced it with a cheap relay it bugs the hell out of me ### help me im hope if i replace it will fix my...

It was the oil pump sprocket i used a wench to put some tension on it and everything lined up after that

I printed out the vfaq its right next to me lol

I have the jay racing alignment tool so the gears are locked in place after i take it off and do a quarter counter clockwise turn i bring it back to the crank mark bit then the gears are off

Ok so im try number 4 and every time i put it back on the cam gears are always off by one tooth im using the jay racing kit and i cant get someone please tell me what i doing wrong

Does any one have a 2g "non broken" middle timing cover for sale please let me know thx milo 602 397 1920

Thanks tyeler i just got my own jay racing kit it was just smarter yo buy it then buying snap on lol

Lol thats funny thanks slickpyro its funny that u said that i have an appointment tomorrow with the snap on guy my brother uses thanks il ask about it tomorrow

Thanks guys but im talking about the tool for the two pin holes on the pulley it selfI cant get good tension on the belt its a little loose

Does any one have a timing tensioner pulley tool i can borrow or buy im doing my first timing belt and i wanna do it right please let me know thx milo 6023971920

I Didn't remove it i just got it. i knew it was leaking oil but couldnt find it i googled common oil leaks in that location that came up so i checked but anyway my motor still has the balance shaft belt it's just a way to make sure it's aligned you stick a screwdriver in if it goes in it's...

I dont know the thread of the bolt if anyone has an extra one i will replace it with the one i order from mitsu i just dont wanna wait till tue

Does anyone have an extra block layin around that can spare this bolt i have a massive oil leak i called mitsu the can get it for 5 bucks but wont have it till tue can anyone helpI

Do u still have the shell and motor and is it auto or 5 speed

Ok so to start the water pump is bad and i think that the castle plug on on the pump might be leaking i have not comfirmd if its the o ring or a cracked housing and since i gotta take the belt off, to replace the water pump im just gonna replace all the timing components including balence shaft...

Any dsm'ers out there with a cherry picker think they can help me out on sunday everything is already disconnected and removed just gotta unbolt the mounts any help would be appreciated my name is milo 6023971920 thx

Could this be the cause of the misfire?

Need some help have a really bad misfire no obd codes i have changed out all the ignition components done a compression test so i decided to check the ecu and i found a leaking cap my question is how do u tell if it to far gone heres a pic i did find another eprom for 150.00 on cl or [should i...

So after replacing all the ignition components trying to track down a damn misfire i find this anyways does any one know were i can get the caps replaced in town i really cant afford any down time thanks guys.....

So i have changed plug wires and plugs and Done a compression test all good but i have a miss fire on #3 so the only thing i can think of is a bad coil pack so does anyone have 1 for sale dirt cheap or maybe trade please let me know my name is Milo 6023971920 thanks

7 bolt for sale running still in the in the car so u can see, hear it and test drive if u want ine small oil drip from filter housing i think will be sold as a bare block only 900 or best offer 602 3971920 thanks milo

If any one has some or know where to get them please let me know im trying to undo an eclipse. Conversation thanks milo 6023971920

Thanks man il pm u with my info

Any one have a spare intake pressure sensor for sale please let me know..... one code away from no check engine light lol thx milo 602 397 1920

Ok power windows, power locks, sun roof, gauges, dimmer switch, power mirrors, turn signals, hazard lights, head and tail lights and wipers oh and just found out the cruise control doesn't workSorry I ment today all that stuff does work except my cruise control

Thanks eclipsalon I will take a look at that one today and thanks to everyone else who chimed in and if anyone else has any ideas feel free to let me know thx

Ok I dont have a logic probe but I do have a test light that can tell if a wire is hot or cold blue and red leds lol don't know if that's a logic so here is the weird thing when I tested the radio power wire it comes up as a blue led which means it's now a ground I don't understand how that can...

yeah between the glow gauges the neon and the this shitty ass alarm install wiring is a nightmare it just annoys the crap outta me that somethings work and something dont my sunroof power windows and power locks work it just sucks I had to find out the hard way that the horn didn't work lol

not much experience with wiring diagrams my last tsi had no problems and this 1 is just a headache

okay I just picked up a 95 tsi in horrible shape someone watched a little bit too much of the first fast and furious lol but anyways the problem I'm having is my dome light my radio my obd plug and horn do not work I have checked all the other thread and everyone seems to have the same solution...

Hey guys I just picked up a tsi in bad shape any help would be nice I'm looking for 2gb bumpers and sideskirts for a talon maybe even both doors anyone have any for sale or know any one who does let me know ### 602 397 1920 thx oh also it has some electrical problems the obd, horn dome lights...

I'm in just let me know when and where

Trust me I'm looking for one.....

Ok i have searched but did not find an answer this is my first 1g 92 plymouth laser awd and during my build i discovered that the tank was half way full and its been sitting for about 5 years.... So yeah its looking bad and my question is are fwd and awd gas tanks the same or are they diffrent i...

Thanks for the help guys il look in to the tps