The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support Morrison Fabrication

Search results

  1. Car starts then stalls???

    Hey guys, So I can turn my car over it will run for about two seconds then die. I can hold the gas to the floor the rpm's will raise to about 3k then when the two seconds is done it dies. This happened to me on wednessday morning before going to work I couldnt get it started so I left it I...
  2. Car starts boggs down then stalls?

    Hey guys, I have been having this problem for about 3 weeks now and it has been getting worse. I will start my car then it boggs down I try to give it gas but it wont respond then stalls. It only happens every now and then, other times it starts right up. I have also noticed a like clicking...
  3. Possibly buying talon awd advice please

    Hey guys like the title stats I am going to look at a 95 awd talon on the weekend my question is what to look for on a awd. I Dont know to much about the drivetrain and what to look for... I have 95 fwd talon now it is my baby, I have had it for two years now. I will be using the awd for the...
  4. Fwd street tire??

    Hey guys, Well the nice weather is rolling around and its about time to take the winter tires off. I have been looking and looking for a good daily driving tire that will be able to take around 350hp without lighting up to bad. I do have a dual stage mbc so 1st and second gear will only see...
  5. dsm link question, is it worth it?

    Hey guys, I have been reading up on dsm link but I still have some questions about it, Do you need a lap top to tune at all times? How much harder is it to use than the safc2? I am going to go with evo 16G the safc2 550’s and a 190. But I am still curious if dsm link will benefit me. If I...
  6. Low oil pressure, lifter noise??

    Hey guy’s I have been having very low oil pressure, My vac is at 14lbs I have no leaks that I could find. Before I got my head work (hks cams, port and polish, 3 angle valve job) I had a little bit of engine noise but nothing new with dsm’s. At idle I have very bad lifter noise or so it sounds...
  7. Turbo help

    some advise on what turbo to get? I'm debating on either the garrett t28 the small 16G or the big 16G. I only want to run around 17-18 psi (all the way to red line) I was leaning more towards either the small or the t28 because of spool up time. But Ive also read the the big 16 G can deliver...
  8. Fuel Management?

    I recently got some work done to my head. port and polished 3 way valve job hks cams.V springs. I was wondering if with all this better air flow if I should do some sort of FM. I Pulled the plugs to see if I was running lean and they looked fine. I was thinking of going with the apexi afc2. I...
  9. flywheel resurfacing??

    Im getting my act 2100 put in tomorrow and I was wondering if there was any certain spec that the flywheel needed to be for this cluth I thought I saw somewehre there was. (stock flywheel) Thanks again.
  10. Its CLUTCH time

    Well its time for a clutch, my stock clutch is just slipping a redic amount. I think Im going to go with the act 2100. I was going to get a fidanza flywheel but I dont want to make a track car, and I dont have the money right now. My question is is there anything I should replace while doing the...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned VR Speed Factory
Top