The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

  • Join the Community!

    DSMtuners is a massive archive of DSM information - but more importantly, it's a COMMUNITY! Join in and participate with other DSMers, and invite all of your DSM friends to make this place their home. Chat with others, create a build thread, post questions and answers. Get involved! Logging in will also remove many of the advertisements, along with this notice. ;) It will also allow you to view images in threads.

Please Support Fuel Injector Clinic
Please Support Morrison Fabrication

Search results

  1. awdmonster1904

    1G New personal best

    Yeah good times …. Got tired of that stage … and had all the parts in stock for the auto swap. The thing that always broke for me was the rear ends … too much shock i guess . When i destroyed my 4th rear end that i just sent to TMZ I made up my mind to go auto
  2. awdmonster1904

    1G New personal best

    I’ll post the vid soon let’s me figure it outIt’s should be 9.4 maybe 9.3 but we going to work on low 9.0 we shall see
  3. awdmonster1904

    1G New personal best

    Hello there! Here’s a quick recap of what happened in the past.- previously the car was running at 6766 and just swapped it to auto we had a heck hasket failure that also damaged the head. After looking at the log we realized that I had too much timing. With the automatic adding more load on...
  4. awdmonster1904

    Awdmonster drag car

  5. awdmonster1904

    Awdmonster drag car

    After figuring out all the little gremlins and now the car started to move a new PB 6.0 @120 We still have room to grow Looking at the logs- The overheating issue was resolved due to a faulty fan relay can I subjectivist to get a higher CFM fan and potentially a new radiator as my current...
  6. awdmonster1904

    Awdmonster drag car

    Took it to the track for some testing unfortunately I ran out of nitrous and had to Cut it short ….A couple things that I feel we can make the car better A pressure sensor to have the bottle heater turn on automatically.And having an extra bottle …
  7. awdmonster1904

    Awdmonster drag car

    Getting ready for the dyno this Thursday changed all the fluids. Trans and engine ..
  8. awdmonster1904

    Awdmonster drag car

    update ** we had to stop at 44 psiThe alternator belt let go at 44psi of boost and we had to end the session. I was building the boost feed forward tables and pushing target boost up to 49psi and was going to see how it did there and see about pushing towards mid 50s if it seemed happy...
  9. awdmonster1904

    1G Finally got tuned 6766 infinity

    Ted is doing good he’s still working the battle tank /bass boat is active .
  10. awdmonster1904

    1G Finally got tuned 6766 infinity

    This was with a s cover
  11. awdmonster1904

    Awdmonster drag car

    Tomorrow we going to get. Retune on the super99 Will update you guys with results
  12. Precision turbo 6766 ball bering
    Sold

    For sale Precision turbo 6766 ball bering

    Purchased the turbo brand-new have 15 passes and 1 dyno session.It’s a s cover 6766 BB t4 hot side .96 a/r . Reason for sale , going with the super 99$2000 shipped that includes manifold Manifold was made by another DSM enthusiast Stackhouse fab out of Florida it’s a good manifold very...
    $2,000.00
  13. awdmonster1904

    Awdmonster drag car

    Turbo swap Sunday Had slight fitment issues got them all solved1 coolant pipe hits nothing that a hammer can’t fix2- the WG vacuum banjo was hitting the manifold making it the wrong angle for the dump tube solution take apart the WG and clock the hat …3 oil return. Got new line got it...
  14. awdmonster1904

    What did you do to your DSM today?

    Swaped out the 6766 going super 99 It was a mission but got it done
  15. awdmonster1904

    Awdmonster drag car

    Getting some final parts to install the super 99 I’ll make more post as I get this installedI mine as well figured get this turbo installed since i need to retune the car.
  16. awdmonster1904

    DSM Videos

    Here’s a video of mine
  17. awdmonster1904

    Feal the love!

    I had them on my 2g I believe I purchased him about four years ago or longer they’re basically the entry level ones can’t recall i liked the way they handled feels are local to me.Last I spoke I was asking them for a drag specific set up for my 1gI like feels …
  18. awdmonster1904

    1G Turbo choice? 6766 vs super 99

    I got it already … but what turbo would you recommend. ?
  19. awdmonster1904

    1G Turbo choice? 6766 vs super 99

    I see that that makes sense since my buddy that hooked me up with the super 99 had to spray on top end to get it to boost 50+ psi ..My whole thing is with my 6766 it’s t4 bigger hot side I’ll probably have the same results as the 99I’ll swap it if it’s worth it but if it’s too close why do...
  20. awdmonster1904

    1G Turbo choice? 6766 vs super 99

    Hello everyone!I’m just trying to get some feedback to see if it’s worth getting t to swap out the 6766 t4 .96 hot side in favor of the super 99 v band 1.05 hot sideAny advice would be greatly appreciated!
  21. awdmonster1904

    Drag Race Build KRATOS V2

    Awesome work man! Your build has gave me some advice! Thank you for sharing . I have a super 99 on the shelf been having a hard time making my mind to swap it in vs the 6766… Almost seams like it’s not worth the swap after reading your experience on the super 99 running out of steam ..
  22. awdmonster1904

    Awdmonster drag car

    Got the injectors fixed by Alpha injection in Orem Utah. Got thing going again now I’m getting things together!
  23. awdmonster1904

    Awdmonster drag car

    This injector was on cylinder 4 😵 probably the main cause of the issue.
  24. awdmonster1904

    Awdmonster drag car

    Got the head back from the machine shop i had to fix 6 exhaust valves so i got 8 so they can all match.
  25. awdmonster1904

    Awdmonster drag car

    I guess I do ..... might need to lower the timing a tad ....
  26. awdmonster1904

    Awdmonster drag car

    they are 10:1 ??? are they really I was under the impression they are 9.6 to 1 I do It cleaned up nice and there is no low spot
  27. awdmonster1904

    Awdmonster drag car

    Working on making sure there is not low spots and prepared the surfaces deck.Thanks to a fell dsmtuner from Los Angeles @Phardo I was able to get an HKS gasket in the 1.6 mm and new Gates blue belt !
  28. awdmonster1904

    Awdmonster drag car

    Working on cleaning this for the new gasket. Currently waiting on parts
  29. awdmonster1904

    How to cut your own head gasket o-rings at home

    Thank you 🙏🏻 I blew my HG last weekend racing but it more Tune related at this point. But my RA is good still for mls I almost went composite with no o rings just to see how much it would hold at 45 psi
  30. awdmonster1904

    How to cut your own head gasket o-rings at home

    Thank you for sharing this !!Just curious how many passes did your composite make before it blew up ?
  31. awdmonster1904

    Awdmonster drag car

    Quick update we had a HG failed and torched the head working on getting it fixedI’ll post more updates
  32. awdmonster1904

    Race/Event Recap Chuckwalla no prep racing

    I was checking the logs going The auto adds more Load might have to rework the tables. For the launch taking off 18 degrees too much creating a lot of heat combined with the load of the auto that did the trick ….
  33. awdmonster1904

    Race/Event Recap Chuckwalla no prep racing

    Boost off the line 11 psi 35 WOT Rpm launch 3800 Nos 100 shot up to 25 mphAfter reviewing my logs I came to conclusion that I’m pulling way too much time in creating heat.The head has been torged before and welded and that is always going to be a weak point.Took it apart today
  34. awdmonster1904

    Race/Event Recap Chuckwalla no prep racing

    Made 2 runs the good news is that the new automatic works flawlessly and was able to get a new PB in in the 1/8 or 6.3 at 107 mph with 1.6 60ft on no prep dusty road, However…… on the second run the head gasket gave out.
  35. awdmonster1904

    More Alternators, Axles, Batteries…

    Rock auto been good to me …. I’m about to look for some wheel berings
  36. awdmonster1904

    2G Is this fuel pump assembly salvageable?

    No,If you need I’ll sell you a Walbro 255 Make me an offer
  37. awdmonster1904

    1Gb Talon Rust Revival

    Looks amazing keep up the great work
  38. awdmonster1904

    Awdmonster drag car

    Thank you to @antilag200 Warren for this sweet breather set up for the transmission!
  39. awdmonster1904

    Awdmonster drag car

    Finally added the dsmtuners decal
  40. awdmonster1904

    1995 eagle talon tsi

    Welcome to the forums
  41. awdmonster1904

    Aftermarket Glass For 2G Rear Hatch

    Here you gohttp://www.opticarmorwindows.com/applications-oversized-windows-detail.asp?model=Eclipse%201995%20to%201999&manufacturer=Mitsubishi
  42. awdmonster1904

    2G Where to get a replacement Fuel Pump Hanger

    I have you you can have for free I’m local in ChinoPm me for more details
  43. awdmonster1904

    1G 1g with 2g auto trans what starter ?

    Update ***I ended up using a 2g starter for a 5 speed car however i added washers as thick as the starter plate the washers are between the bell housing and starter.I hope this helps anyone doing a swap.
  44. awdmonster1904

    ECMlink RESOLVED - What the hell is going on with my car/tune going full lean.?

    Have you flow tested your injectors ? Assuming that you’re on e85 you might wanna see if the injectors are flowing good and not dirty.
  45. awdmonster1904

    Brake Vacuum Pump Drag/Daily Setup

    Yea , but i figured it out by testing it .. I used it after the pass to slow down.
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned VR Speed Factory
Top