96eclipsex
15+ Year Contributor
- 93
- 0
- Sep 29, 2005
-
Rutledge,
Tennessee
Yesterday I hooked up my boost gauge and my greddy profec e-01. When I started the car the boost gauge read about -10, and the greddy profec e-01 read about -9.9 at idle.
well this seemed to me like it should be sucking more so I asked on this forum last night,
and a guy said that his would idle at about -20. So I found the problem today,it was a unplugged vac line. so i fixed it and now my boost gauge reads about -20 to -23, but my profec e-01 still only reads about -9.9 and its not because of the vac lines.
I have the profec e-01 set to read psi. Is this right or should it be the same as the boost gauge????
well this seemed to me like it should be sucking more so I asked on this forum last night,
and a guy said that his would idle at about -20. So I found the problem today,it was a unplugged vac line. so i fixed it and now my boost gauge reads about -20 to -23, but my profec e-01 still only reads about -9.9 and its not because of the vac lines.
I have the profec e-01 set to read psi. Is this right or should it be the same as the boost gauge????