The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Morrison Fabrications
Please Support Rix Racing

sbr race core = kinetics fmic

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

unlmtdndeavor

15+ Year Contributor
1,213
6
Nov 20, 2003
San Ramon/SLO, California
i heard that the sbr race core was the same as the kinetics motorsports kit. i was wondering if there is any truth to this? even the descriptions of the two are the same.

Kinetics Motorsports
Ok, you have to have a Front Mount, but you're just not sure what you need. Well here you have it. The definitive answer to your question. Our core, measuring 24" long, 12" high and 3.5" wide, will cool anything you'd like to throw at it. It also uses the shortest pipe routing of any we've seen. Straight down under the intake pipe and out beside the radiator core. If you like your fog lights, don't worry, they'll fit with just a little pushing on their brackets. The end tanks are designed with you in mind. The core only hangs a half inch below your bumper, so unless you're already in the weeds, no need to worry.

Slowboy Racing
Our core, measuring 24" long, 12" high and 3.5" wide, will cool anything you’d like to throw at it. It also uses the shortest pipe routing of any we’ve seen. Straight down under the intake pipe and out beside the radiator core. If you like your fog lights, don’t worry, they’ll fit with just a little pushing on their brackets. The end tanks are designed with you in mind. When ordering please let us know what bov you are going to use so we can flange it for the fmic kit. We can polish the core itself and all the piping for an additional $300.
 
Kinetics make the fmic's. If you order one for them or from SBR, you get some paperwork inside that say's Kinetic as well as a sticker on the box. If I remember correctly Kinetic is in Canada, and I was speaking with Jon at SBR one day, and he says they are the only vendor in the US allowed to market and sale the FMIC. SBR gets the kits from Kinetic, and then weld on whatever type BOV flange you want on the piping.
 
slowboy was supposed to design the frontmount, and hired kinetic to make them. At least thats what Mike says.
 
shleppy said:
slowboy was supposed to design the frontmount, and hired kinetic to make them. At least thats what Mike says.

100% correct, Kinetic Motorsports was spawned from ADP Distributors about four years ago to bring my ideas (as well as SBR's) to market for us. They do manufacture all of our FMIC kits that we sell as our own.

It has been a fantastic relationship, with the exception of letting Vaneer drive the rental vehicles every time I am up there :nono: Trailblazers and water pump pullies, haha... he has not broke a Volvo yet!

Mike Huml
 
Slowboy said:
100% correct, Kinetic Motorsports was spawned from ADP Distributors about four years ago to bring my ideas (as well as SBR's) to market for us. They do manufacture all of our FMIC kits that we sell as our own.

It has been a fantastic relationship, with the exception of letting Vaneer drive the rental vehicles every time I am up there :nono: Trailblazers and water pump pullies, haha... he has not broke a Volvo yet!

Mike Huml


Mike, you've actually been to Kinetic? What did you think of our little corner of the world? Let me guess, it was raining.
 
GVR4592 said:
Mike, you've actually been to Kinetic? What did you think of our little corner of the world? Let me guess, it was raining.

I have been there many times, I fly into Seattle and drive up... believe it or not, has only rained once or twice when I have been there!

Beautiful up in the NW US... I like it more each time I visit!

Mike Huml
 
Slowboy said:
I have been there many times, I fly into Seattle and drive up... believe it or not, has only rained once or twice when I have been there!

Beautiful up in the NW US... I like it more each time I visit!

Mike Huml


I live about 25 minutes from Kinetic, which border crossing do you take?
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top