The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Fuel Injector Clinic
Please Support STM Tuned

hey can i do this?

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

95JDMTSI

15+ Year Contributor
75
0
May 26, 2003
New_YorkUS
hey i just got my dsm and im trying to learn everything I can about it. I have 2g with a jdm 1g motor with upper ic piping and a 1g blow off valve. My question is can I get a bov like a the greddy type s or the turboxs rfl valve? Can they/Will they both have to recirculate into the intake? I want a louder BOV, is it possible without one of those 900$ VPC or whatever? Can I vent with any valve? Will they be louder when recirculated? Let me know what my bov options are and what i can do to make them louder. Thanks
 
Yes you can get an aftermarket bov. I know the type S uses the same flange as the stock 1g bov. You need to recirculate or you idle will be crappy. For instance to see what it would idle like disconnect the bov recirculateion tube, and tape the intake portion so unfiltered air doesn't enter. You car will idle pretty junky. Every dsm idles differently and reacts differently so maybe you have an idle king (doubtful). No recirculating wont be as loud as venting to the atmosphere.
im done writing my book LOLz.
 
Well before you right your book please make sure its correct..


First of all.. the flanges for the 1st gen bov and greddy type s are not the same..they are similar..if you use that flange for the greddy you need to drill new holes and I would suggest to use some kind of sealant or gasket...also I can recirc my car with no problems at all...it idles perfectly fine...but everycar is different which is strange...
 
can i get new ic pipes that iwll have a flange for the greddy type s? will it be louder recirculated than my recirculated 1g? what are some loud recirculating ones?
 
Originally posted by 95JDMTSI
can i get new ic pipes that iwll have a flange for the greddy type s? will it be louder recirculated than my recirculated 1g? what are some loud recirculating ones?

Yes you can get another UICP with the greddy flange...eveyone makes them...theres Dejon Tool.. RRE etc etc..and yes the greddy type s will be louder then the 1st gen..you can still use the other flange that is for the 1st genn just drill 2 new holes..but that up to you...
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top