The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support STM Tuned

nitrous in AT GST

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

speed_krazy_chu

15+ Year Contributor
33
0
May 19, 2003
Brooklyn, New_York
I have a 95 GST AT and i was thinking about using a nx wet kit on it...around a 50 shot....i have a big28 turbo..all the boltons..safc+more....i love my car and its pretty fast,but i want to compensate for having the worst launch ever.I have no tranny work..im prolly running low 14s....is it safe to run a 50 shot on my stock AT tranny and how much u think it'll improve on 1/4.Thanks
 
Ive ran a 75 shot before with no problems. For me squeeze from the line was worse once boost built. I turned boost down different settings and still bad. Second gear was full tire spin too.
I now run a manual trigger switch and pump the button on launches and full open at 3rd. Im going to hook up a progressive 0-100 switch to my rpms to engage it by rpm. Good luck...:D
 
did you run 1/4 with the 75 shot...i would prolly use a window switch if i dont get a push button(instead of a normal act. switch).That should help me through the rpms without loosing traction.I would activite it most likely in mid rpms in 2nd or engage in 3rd as you said,because i get wheel hop as is w/o nitrous.any other suggestions people.i wanna get the kit ASAP,so i wanna know peoples thoughts.thanks
 
Yeah I was going to get the NX maximizer, but it seemed a bit confusing for me and cost a shitload too. I got the NOS programmable 0-100% adjuster now:D I found a nice one in Jegs, its a Dedenbear controller has retard and a bunch of goodiesOMG Wish I would of got this before I got that...:rolleyes:
 
that dedenbear one is like $500.......to expensive for my blood...i think im going to get the normal nx wet kit.......run either a 50 or 75 shot-i think my tranny could hold it. I will get a heater if possible and a purge.I really would like to hear 1/4 differences for AT if there is any.where can i get a manual trigger switch?thanks
 
I am running a 120 shot direct port nitrous set up at wot with a bottel warmer. Yes all I got was spin through first, and second and grip in third. but I am ordering the progresive nitrous controler system. the i can shot 25% @ 1.5 sec and then 100% @ 5.3 sec. With the setup that i had it ran a 12.857 @ 106.28 with a 1.783 60' and a 5.309 for 330. I also ran my big 16 @ 15psi. so you awd tranny should hold up to 120 shot with big 16 @15 psi. I also have a stage 4 clutch masters clutch in it.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top