The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support STM Tuned

brakes

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

pimp4110

20+ Year Contributor
40
0
Jul 6, 2002
Buffalo_N.Y.
I just changed my rotors calipers and brakes and now when i reverse it makes a really bad squeeking noise (only in reverse though) and another thing my rear drivers side brake seems to only catch on the top 1/2 of the brake pad and the rotor below is starting to rust has anyone had this problem.
 
Do you hear a rattle from the car especially when going over bumps? There are clips on the calipers that hold the pad in place. I was mission a clip and it caused the pad to rattle and wear really unevenly. It also made a really bad groan when I used the brakes in reverse. Those clips on the caliper could be it. Hope this helps.
 
i bought the caliper loaded so i dont know for sure but ill take it apart when i get a chance. Can you buy the clips seperate. Another thing i heard something about double piston calipers from a 2g i think. does anyone know about this and where to get them cheap.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top