The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support Morrison Fabrication

camber kits?

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mrbrianf20

15+ Year Contributor
31
0
Oct 17, 2005
plymouth, Minnesota
first off, i apologize for posting here (it wont let me post in the handling tech). ok so i just baught my 98 gsx a few weeks ago and its got 3'' lowering springs on it. i know i know, 3'' is too low and i lose handling. i am planning on selling the 3'' springs and getting 2'' lowering springs. but while im at it, i have to fix my rear wheel camber. now ive never done camber kits before so im going to have my friend help. is there any good place to get the kits? firestone wants to charge me $1000 to install camber kits on my rear wheels. i found some kits at http://www.drivewire.com/performanceparts/intrax/mitsubishieclipsecamberkits.html for like $35 a piece. i wanted to know if those are a legit kit? if anybody knows where i can get a camber kit for please let me know!

also, if my car has been lowerd 3'' for a while and the struts arnt bad yet, should i get different aftermarket ones? (im not sure if they are stock or not)
 
WOW! That is low, way to low, and yes, you will lose handling, especially cornering. Check our sponsors here, they will tell you where to get that at. I checked out your link, I think those are sold individually, the rear camber kits are cheap, even if they are separately sold, but the front ones are expensive. Ingalls kits come in pairs and are still cheaper, check em out, like I said, our sponsors are here for a reason.... :talon:
 
what do you guys think about me getting new struts? if the ones ive got are still working good after its been lowerd 3'' should i get new ones or not? idk if they are aftermarket or not
 
mrbrianf20 said:
what do you guys think about me getting new struts? if the ones ive got are still working good after its been lowerd 3'' should i get new ones or not? idk if they are aftermarket or not

Get em, that is way to low for any strut to take, you can see if they are OEM or aftermarket, read the labels.... if it has that black coating, its stock, if not, then its aftermarket.... bushings are a good thing to upgrade too.... :talon:
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top