The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Morrison Fabrications
Please Support Fuel Injector Clinic

420A 420a turbo build parts list?

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

420a_zhen

Probationary Member
13
1
Feb 19, 2023
joplin, Missouri
Ok so I have a 95 gs 2g 420a that I wanna build
And I need a parts list, I have all the turbo parts I just needa link or something like for rods, pistons, cams, springs, bearings, etc
 
EAGLE RODS

JE PISTONS (you will need to verify the proper bore size. 8.8:1 compression is recommended for boost on pump gas)

CROWER CAMSHAFTS (I recommend the stage 2.)

Bearing choice is up to you. Just make sure you measure the crank to check if it's within spec. Some people seem to prefer King bearings but I have always used Clevite and never had problems.

Brian Crower makes a good titanium spring/retainer kit. They are advertised for Neons only but the Eclipse parts are exactly the same. See them HERE
 
Last edited:
EAGLE RODS

JE PISTONS (you will need to verify the proper bore size. 8.8:1 compression is recommended for boost on pump gas)

CROWER CAMSHAFTS (I recommend the stage 2.)

Bearing choice is up to you. Just make sure you measure the crank to check if it's within spec. Some people seem to prefer King bearings but I have always used Clevite and never had problems.

Brian Crower makes a good titanium spring/retainer kit. They are advertised for Neons only but the Eclipse parts are exactly the same. See them HERE
does that mean i can use neon cams in my motor? if i wanted to
any tips for building this
 
No, Neon cams are not compatible. Technically you can modify them to work but why do that when 420a cams are available.
bc eclipse cams take forever to ship vs where neon cams would come in with the rest of my parts, unless i can find eclipse cams that can get to me by the first or close to then
 
bc eclipse cams take forever to ship vs where neon cams would come in with the rest of my parts, unless i can find eclipse cams that can get to me by the first or close to then
If you use the link that I posted above, I don't see any reason why it should take multiple weeks to receive them. I ordered my camshafts from that specific website and they arrived around 5 days after ordering them.
 
We don't have the quantity you requested, we'll back order the remaining 1. The average days to make for remaining quantity is 28 is what it says for me
If you use the link that I posted above, I don't see any reason why it should take multiple weeks to receive them. I ordered my camshafts from that specific website and they arrived around 5 days after ordering them.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top